Français dropdown-ico

Manuel d’utilisation Patton electronic 1075

24 pages 1.8 mb
Télécharger

Aller à la page of 24

Summary
  • Patton electronic 1075 - page 1

    USER MANUAL MODEL 1075 KiloModem II AC Powered, High-Speed X.21 Short-Range Modem SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .patton.com Part #07M1075-B Doc: 054081U , Rev. C Revised 1/23/08 CERTIFIED An ISO-9001 Certified Company ...

  • Patton electronic 1075 - page 2

    1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 1075 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment. This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized ...

  • Patton electronic 1075 - page 3

    1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 1075 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment. This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized ...

  • Patton electronic 1075 - page 4

    2.0 GENERAL INFORMA TION Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Y ear parts and labor . If any questions or problems arise during installation or use of this product, please do not hesitate to contact Patton Electronics Customer Service at (301) ...

  • Patton electronic 1075 - page 5

    2.0 GENERAL INFORMA TION Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Y ear parts and labor . If any questions or problems arise during installation or use of this product, please do not hesitate to contact Patton Electronics Customer Service at (301) ...

  • Patton electronic 1075 - page 6

    Switches S2-1 and S2-2: Data Rate Switches S2-1 and S2-2 are set in combination to determine the synchronous data rate for the Model 1075. S2-1 S2-2 Setting Off On 32 kbps On Off 56 kbps On On 64 kbps Switches S2-3 and S2-4: System Clock Mode The setting for switches S2-3 and S2-4 determines the transmitter clocking mode for the Model 1075. S2-3 S2 ...

  • Patton electronic 1075 - page 7

    Switches S2-1 and S2-2: Data Rate Switches S2-1 and S2-2 are set in combination to determine the synchronous data rate for the Model 1075. S2-1 S2-2 Setting Off On 32 kbps On Off 56 kbps On On 64 kbps Switches S2-3 and S2-4: System Clock Mode The setting for switches S2-3 and S2-4 determines the transmitter clocking mode for the Model 1075. S2-3 S2 ...

  • Patton electronic 1075 - page 8

    3.2 CONFIGURA TION STRAPS In addition to the configuration switches described above, the Model 1075 is also equipped with two internal straps that set the DTE/DCE Configuration and the DB-15 Shield. In order to configure these straps, you must open the Model 1075 case. NOTE: Before opening the case, determine whether the default settings are correc ...

  • Patton electronic 1075 - page 9

    3.2 CONFIGURA TION STRAPS In addition to the configuration switches described above, the Model 1075 is also equipped with two internal straps that set the DTE/DCE Configuration and the DB-15 Shield. In order to configure these straps, you must open the Model 1075 case. NOTE: Before opening the case, determine whether the default settings are correc ...

  • Patton electronic 1075 - page 10

    3.2.4 Setting the JP1 Shield Strap The setting of JP1 determines whether the shield (pin 1) of the X.21 interface is connected signal ground. In the default setting, DB-15 shield is connected to signal ground. The X.21 shield is not connected to signal ground when the jumper is placed on pins 1 and 2 . See Figure 7, below . Jumper 1: DB15 Shield Po ...

  • Patton electronic 1075 - page 11

    3.2.4 Setting the JP1 Shield Strap The setting of JP1 determines whether the shield (pin 1) of the X.21 interface is connected signal ground. In the default setting, DB-15 shield is connected to signal ground. The X.21 shield is not connected to signal ground when the jumper is placed on pins 1 and 2 . See Figure 7, below . Jumper 1: DB15 Shield Po ...

  • Patton electronic 1075 - page 12

    4.3 AC POWER CONNECTIONS Power is supplied to the Model 1075 by a 9 VDC, 1 A wall mount transformer . This transformer connects to the Model 1075 by means of a cannon jack on the rear panel. The Model 1075 is powered-up as soon as it is plugged into an AC outlet–there is no power switch. 120 V AC Power (US) The 120 V AC adapter supplied with the ...

  • Patton electronic 1075 - page 13

    4.3 AC POWER CONNECTIONS Power is supplied to the Model 1075 by a 9 VDC, 1 A wall mount transformer . This transformer connects to the Model 1075 by means of a cannon jack on the rear panel. The Model 1075 is powered-up as soon as it is plugged into an AC outlet–there is no power switch. 120 V AC Power (US) The 120 V AC adapter supplied with the ...

  • Patton electronic 1075 - page 14

    5.2 TEST MODES The Model 1075 offers two V .54 test modes to evaluate the condition of the modems and the communication link. These tests are activated from the front panel. 5.2.1 Local Analog Loopback (LAL) The Local Analog Loopback (LAL) test checks the operation of the local Model 1075, and is performed separately on each unit. Any data sent to ...

  • Patton electronic 1075 - page 15

    5.2 TEST MODES The Model 1075 offers two V .54 test modes to evaluate the condition of the modems and the communication link. These tests are activated from the front panel. 5.2.1 Local Analog Loopback (LAL) The Local Analog Loopback (LAL) test checks the operation of the local Model 1075, and is performed separately on each unit. Any data sent to ...

  • Patton electronic 1075 - page 16

    C. If the BER test equipment indicates a fault, and the Local Analog Loopback test was successful for both Model 1075s, you may have a problem with the twisted pair line between the modems. Y ou should then check the twisted pair line for proper connections and continuity . 5.2.3 How to Use the V .52 BER T est Independently The V .52 BER test can b ...

  • Patton electronic 1075 - page 17

    C. If the BER test equipment indicates a fault, and the Local Analog Loopback test was successful for both Model 1075s, you may have a problem with the twisted pair line between the modems. Y ou should then check the twisted pair line for proper connections and continuity . 5.2.3 How to Use the V .52 BER T est Independently The V .52 BER test can b ...

  • Patton electronic 1075 - page 18

    APPENDIX B MODEL 1075 F ACTOR Y REPLACEMENT P ARTS AND ACCESSORIES Patton Model # Description 1075 ................................KiloModem II X.21 Short Range Modem 0805B ..............................120V W all Mount AC Adapter 08059DCI ........................230V AC Adapter (No Power Cord) 0805US ...........................American Power Cord ...

  • Patton electronic 1075 - page 19

    APPENDIX B MODEL 1075 F ACTOR Y REPLACEMENT P ARTS AND ACCESSORIES Patton Model # Description 1075 ................................KiloModem II X.21 Short Range Modem 0805B ..............................120V W all Mount AC Adapter 08059DCI ........................230V AC Adapter (No Power Cord) 0805US ...........................American Power Cord ...

  • Patton electronic 1075 - page 20

    19 Dear V alued Customer , Thank you for purchasing Patton Electronics products! W e do appreciate your business. I trust that you find this user manual helpful. W e manufacture one of the widest selections of data communications products in the world including CSU/DSU's, network termination units, powered and self-powered short range modems, ...

  • Patton electronic 1075 - page 21

    ...

  • Patton electronic 1075 - page 22

    ...

  • Patton electronic 1075 - page 23

    ...

  • Patton electronic 1075 - page 24

    19 Dear V alued Customer , Thank you for purchasing Patton Electronics products! W e do appreciate your business. I trust that you find this user manual helpful. W e manufacture one of the widest selections of data communications products in the world including CSU/DSU's, network termination units, powered and self-powered short range modems, ...

Fabricant Patton electronic Catégorie Modem

Les documents que nous recevons du fabricant de l'appareilPatton electronic 1075 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Patton electronic
- manuels d’utilisations 1075
- fiches produit Patton electronic
- dépliants
- ou étiquettes-énergie Patton electronic 1075
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Patton electronic 1075.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Patton electronic 1075, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Patton electronic 1075. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Patton electronic 1075.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Patton electronic 1075, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Patton electronic 1075 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Patton electronic 1075.

Le manuel d’utilisation complet Patton electronic, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Patton electronic 1075 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Patton electronic 1075, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lPatton electronic 1075 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Patton electronic 1075 - qui devraient nous aider dans les premières étapes lors de l'utilisation Patton electronic 1075
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Patton electronic 1075
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Patton electronic 1075 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Patton electronic 1075?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Patton electronic 1075, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Patton electronic 1075 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)