Bedienungsanleitung La Crosse Technology WT-5442

17 Seiten 0.71 mb
Download

Zur Seite of 17

Summary
  • La Crosse Technology WT-5442 - page 1

    WT-5442 with TX6 Transmitter 433 MHz Radio Controlled Projection Alarm Instruction Manual 1 ...

  • La Crosse Technology WT-5442 - page 2

    TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipment 2 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery Installation 4-5 Program Mode Programming Sequence 5 Function Buttons 6 Time Zone Setting 6 DST (Daylight Saving Time) Setting 7 Adjustable Snooze 7 Time Setting 7 Date Setting 8 12/24-Hour Setting 8 Selecting ? ...

  • La Crosse Technology WT-5442 - page 3

    FEATURES OF PROJECTION ALARM Operation of these features are in section III. 1. Radio-controlled time and date 2. Projection of time and/or remote temperature 3. EL backlight 4. Six modes of date/se conds/temperature display 5. Indoor temperature 6. Remote outdoor temperature 7. Dual alarms 1) Adjustable snooze ABOUT WWVB (Radio Controlled Time) Th ...

  • La Crosse Technology WT-5442 - page 4

    Note: When using the AC adaptor, plug into the projection alarm first and then into the electrical outlet (thi s will help avoid pressing any buttons inadvertently). 3) Wait 10 minutes for WWVB rec eption and remote temperature. 4) If there is no WWVB reception, manually set the time and date (instructions in the Program Mode). 5) Program the setti ...

  • La Crosse Technology WT-5442 - page 5

    B. PROJECTION ALARM 1. Remove the battery cover. 2. Observe the correct polarity, and install 3 AA batteries. 3. In addition or instead of inserting batteries, the AC adapter can be used. Simply plug the adapter into the receptacle on the underneath of the alarm clock and then plug the adapter into the outlet. 4. Replace the battery cover. 5. The p ...

  • La Crosse Technology WT-5442 - page 6

    A. PROGRAMMING SEQUENCE Default (Factory) Setting 1. Time Zone Setting -5 (eastern standard time) 2. Daylight Saving Time ON/OFF ON 3. Adjustable Snooze 10 Minutes 4. Hour Setting 12: AM 5. Minute Setting :00 6. Year Setting 01 (2001) 7. Month Setting 1 (January) 8. Date Setting 1 9. Day Setting MO (Monday) 10. 12/24-hour Mode 12-hour B. FUNCTION B ...

  • La Crosse Technology WT-5442 - page 7

    D. DST (DAYLIGHT SAVING TIME) SETTING Note: The DST default is “On”, meaning that the WWVB will automatically change the time according to Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes (Arizona and parts of Indiana) turn the DST “OFF”. 1. Hold down the “ SET” button for 1 second (the selected t ...

  • La Crosse Technology WT-5442 - page 8

    5. Press and release the “ SET” button to confirm the time setting, and to advance to manually set the date. G. DATE SETTING Note: When the WWVB signal is found, that date will over-ride the manually set date. 1. Hold down the “ SET” button for 1 second (the selected time zone will flash), press the “ SET” button 5 more times, until the ...

  • La Crosse Technology WT-5442 - page 9

    FEATURES & OPERATIONS III. A. FEATURES 1. Radio-controlled time and date 2. Projection of time and/or remote temperature 3. EL backlight 4. Six modes of date/se conds/temperature display 5. Indoor temperature 6. Remote outdoor temperature 7. Dual alarms 8. Adjustable snooze 9. Forecast icon based on changing air pressure B. RADIO-CONTROLLED TIM ...

  • La Crosse Technology WT-5442 - page 10

    C. PROJECTION OF TIME AND/OR REMOTE TEMPERATURE 1. When plugged into an AC outlet, the projec tion alarm can continuously project the time and/or remote temperature. 2. When operating on batteries alone, the Projection Alarm will only project when a button is pressed. 3. The projection will auto-focus for displa y from three to six feet away. A dar ...

  • La Crosse Technology WT-5442 - page 11

    F. REMOTE TEMPERATURE 1. The projection alarm comes with a remote temperature sensor. When set up properly, the projection alarm will receive and display the remote temperature. 2. It is important to power up the transmitter first, then the Projection Alarm. If batteries are removed in the remote, the projection alarm MUST be re-set by removing pow ...

  • La Crosse Technology WT-5442 - page 12

    2. ACTIVATING/DEACTIVATING THE ALARM a. After entering the alarm-setting m ode, the alarm is activated (either ALM1 or ALM2). b. To toggle between activating and deactivating the alarm, press and release either the ALM1 or ALM2 briefly. “(((1)))” or “(((2)))” will be displayed to the right of the time display when the alarm is activated. c. ...

  • La Crosse Technology WT-5442 - page 13

    2. WEATHER ICONS There are 3 possible weather icons that w ill be displayed in the FORECAST LCD: Sunny —indicates that the weather is expect ed to improve (not that the weather will be sunny). Sun with Clouds —indicates that the weather is ex pected to be fair (not that the weather will be sunny with clouds). Clouds with Rain —indicates that ...

  • La Crosse Technology WT-5442 - page 14

    MAINTENANCE & CARE V. A. Extreme temperatures, vibrations, and shock should be avoided to prevent damage to the units. B. Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents—they may mark and damage the displays and casings. C. Do not submerge in water. D. Immediately remove all low powered batteries to av ...

  • La Crosse Technology WT-5442 - page 15

    TROUBLESHOOTING Problem: The Projection is faint Solution: 1) Change intensity setting 2) Use AC adapter 3) Darken surroundings 4) Use fresh batteries (if AC is not used) Problem: The LCD is faint. Solution: 1) Replace the batteries. Problem: “OFL” appears in the indoor temperature LCD. Solution: 1) Move unit to an area with warmer or cooler su ...

  • La Crosse Technology WT-5442 - page 16

    SPECIFICATIONS FOR WT-5442 Temperature: Measuring range: 32 ° F to 122 ° F with 0.2 ° F resolution (indoor) -21.8 ° F to 140 ° F with 0.2 ° F resolution (outdoor) (0 ° C to 50 ° C with 0.1 ° C resolution) Checking intervals: Every 10 seconds indoor, 3 times in 10 minutes for remote temperature. Power source: AC Adapter (included) Input: 12 ...

  • La Crosse Technology WT-5442 - page 17

    17 WARRANTY INFORMATION La Crosse Technology provides a 1-year warranty on this product. Contact La Crosse Technology imm ediately upon discovery of any defects covered by this warranty . Before sending the unit in for repairs, contact La Cro sse Technology. The unit will be repaired or replaced with the same or similar model. This warranty does no ...

Produzent La Crosse Technology Kategorie Clock Radio

Dokumente, die wir vom Produzenten des Geräts La Crosse Technology WT-5442 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen La Crosse Technology
- Bedienungsanleitungen WT-5442
- Produktkarten La Crosse Technology
- Informationsbroschüren
- oder Energieetiketten La Crosse Technology WT-5442
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung La Crosse Technology WT-5442.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen La Crosse Technology WT-5442, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen La Crosse Technology WT-5442. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts La Crosse Technology WT-5442 ansehen.

Die komplette Bedienungsanleitung des Geräts La Crosse Technology WT-5442, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von La Crosse Technology WT-5442 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von La Crosse Technology WT-5442 verständlich ist.

Eine gänzliche Bedienungsanleitung von La Crosse Technology sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von La Crosse Technology WT-5442 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von La Crosse Technology WT-5442 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich La Crosse Technology WT-5442, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts La Crosse Technology WT-5442 - die uns die ersten Schritte während der Nutzung von La Crosse Technology WT-5442 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit La Crosse Technology WT-5442 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von La Crosse Technology WT-5442 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich La Crosse Technology WT-5442?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit La Crosse Technology WT-5442 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit La Crosse Technology WT-5442 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)