English dropdown-ico

Manual La Crosse Technology WT-5442

17 pages 0.71 mb
Download

Go to site of 17

Summary
  • La Crosse Technology WT-5442 - page 1

    WT-5442 with TX6 Transmitter 433 MHz Radio Controlled Projection Alarm Instruction Manual 1 ...

  • La Crosse Technology WT-5442 - page 2

    TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipment 2 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery Installation 4-5 Program Mode Programming Sequence 5 Function Buttons 6 Time Zone Setting 6 DST (Daylight Saving Time) Setting 7 Adjustable Snooze 7 Time Setting 7 Date Setting 8 12/24-Hour Setting 8 Selecting ? ...

  • La Crosse Technology WT-5442 - page 3

    FEATURES OF PROJECTION ALARM Operation of these features are in section III. 1. Radio-controlled time and date 2. Projection of time and/or remote temperature 3. EL backlight 4. Six modes of date/se conds/temperature display 5. Indoor temperature 6. Remote outdoor temperature 7. Dual alarms 1) Adjustable snooze ABOUT WWVB (Radio Controlled Time) Th ...

  • La Crosse Technology WT-5442 - page 4

    Note: When using the AC adaptor, plug into the projection alarm first and then into the electrical outlet (thi s will help avoid pressing any buttons inadvertently). 3) Wait 10 minutes for WWVB rec eption and remote temperature. 4) If there is no WWVB reception, manually set the time and date (instructions in the Program Mode). 5) Program the setti ...

  • La Crosse Technology WT-5442 - page 5

    B. PROJECTION ALARM 1. Remove the battery cover. 2. Observe the correct polarity, and install 3 AA batteries. 3. In addition or instead of inserting batteries, the AC adapter can be used. Simply plug the adapter into the receptacle on the underneath of the alarm clock and then plug the adapter into the outlet. 4. Replace the battery cover. 5. The p ...

  • La Crosse Technology WT-5442 - page 6

    A. PROGRAMMING SEQUENCE Default (Factory) Setting 1. Time Zone Setting -5 (eastern standard time) 2. Daylight Saving Time ON/OFF ON 3. Adjustable Snooze 10 Minutes 4. Hour Setting 12: AM 5. Minute Setting :00 6. Year Setting 01 (2001) 7. Month Setting 1 (January) 8. Date Setting 1 9. Day Setting MO (Monday) 10. 12/24-hour Mode 12-hour B. FUNCTION B ...

  • La Crosse Technology WT-5442 - page 7

    D. DST (DAYLIGHT SAVING TIME) SETTING Note: The DST default is “On”, meaning that the WWVB will automatically change the time according to Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes (Arizona and parts of Indiana) turn the DST “OFF”. 1. Hold down the “ SET” button for 1 second (the selected t ...

  • La Crosse Technology WT-5442 - page 8

    5. Press and release the “ SET” button to confirm the time setting, and to advance to manually set the date. G. DATE SETTING Note: When the WWVB signal is found, that date will over-ride the manually set date. 1. Hold down the “ SET” button for 1 second (the selected time zone will flash), press the “ SET” button 5 more times, until the ...

  • La Crosse Technology WT-5442 - page 9

    FEATURES & OPERATIONS III. A. FEATURES 1. Radio-controlled time and date 2. Projection of time and/or remote temperature 3. EL backlight 4. Six modes of date/se conds/temperature display 5. Indoor temperature 6. Remote outdoor temperature 7. Dual alarms 8. Adjustable snooze 9. Forecast icon based on changing air pressure B. RADIO-CONTROLLED TIM ...

  • La Crosse Technology WT-5442 - page 10

    C. PROJECTION OF TIME AND/OR REMOTE TEMPERATURE 1. When plugged into an AC outlet, the projec tion alarm can continuously project the time and/or remote temperature. 2. When operating on batteries alone, the Projection Alarm will only project when a button is pressed. 3. The projection will auto-focus for displa y from three to six feet away. A dar ...

  • La Crosse Technology WT-5442 - page 11

    F. REMOTE TEMPERATURE 1. The projection alarm comes with a remote temperature sensor. When set up properly, the projection alarm will receive and display the remote temperature. 2. It is important to power up the transmitter first, then the Projection Alarm. If batteries are removed in the remote, the projection alarm MUST be re-set by removing pow ...

  • La Crosse Technology WT-5442 - page 12

    2. ACTIVATING/DEACTIVATING THE ALARM a. After entering the alarm-setting m ode, the alarm is activated (either ALM1 or ALM2). b. To toggle between activating and deactivating the alarm, press and release either the ALM1 or ALM2 briefly. “(((1)))” or “(((2)))” will be displayed to the right of the time display when the alarm is activated. c. ...

  • La Crosse Technology WT-5442 - page 13

    2. WEATHER ICONS There are 3 possible weather icons that w ill be displayed in the FORECAST LCD: Sunny —indicates that the weather is expect ed to improve (not that the weather will be sunny). Sun with Clouds —indicates that the weather is ex pected to be fair (not that the weather will be sunny with clouds). Clouds with Rain —indicates that ...

  • La Crosse Technology WT-5442 - page 14

    MAINTENANCE & CARE V. A. Extreme temperatures, vibrations, and shock should be avoided to prevent damage to the units. B. Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents—they may mark and damage the displays and casings. C. Do not submerge in water. D. Immediately remove all low powered batteries to av ...

  • La Crosse Technology WT-5442 - page 15

    TROUBLESHOOTING Problem: The Projection is faint Solution: 1) Change intensity setting 2) Use AC adapter 3) Darken surroundings 4) Use fresh batteries (if AC is not used) Problem: The LCD is faint. Solution: 1) Replace the batteries. Problem: “OFL” appears in the indoor temperature LCD. Solution: 1) Move unit to an area with warmer or cooler su ...

  • La Crosse Technology WT-5442 - page 16

    SPECIFICATIONS FOR WT-5442 Temperature: Measuring range: 32 ° F to 122 ° F with 0.2 ° F resolution (indoor) -21.8 ° F to 140 ° F with 0.2 ° F resolution (outdoor) (0 ° C to 50 ° C with 0.1 ° C resolution) Checking intervals: Every 10 seconds indoor, 3 times in 10 minutes for remote temperature. Power source: AC Adapter (included) Input: 12 ...

  • La Crosse Technology WT-5442 - page 17

    17 WARRANTY INFORMATION La Crosse Technology provides a 1-year warranty on this product. Contact La Crosse Technology imm ediately upon discovery of any defects covered by this warranty . Before sending the unit in for repairs, contact La Cro sse Technology. The unit will be repaired or replaced with the same or similar model. This warranty does no ...

Manufacturer La Crosse Technology Category Clock Radio

Documents that we receive from a manufacturer of a La Crosse Technology WT-5442 can be divided into several groups. They are, among others:
- La Crosse Technology technical drawings
- WT-5442 manuals
- La Crosse Technology product data sheets
- information booklets
- or energy labels La Crosse Technology WT-5442
All of them are important, but the most important information from the point of view of use of the device are in the user manual La Crosse Technology WT-5442.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals La Crosse Technology WT-5442, service manual, brief instructions and user manuals La Crosse Technology WT-5442. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product La Crosse Technology WT-5442.

Similar manuals

A complete manual for the device La Crosse Technology WT-5442, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use La Crosse Technology WT-5442 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of La Crosse Technology WT-5442.

A complete La Crosse Technology manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual La Crosse Technology WT-5442 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the La Crosse Technology WT-5442, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the La Crosse Technology WT-5442, that we can find in the current document
3. Tips how to use the basic functions of the device La Crosse Technology WT-5442 - which should help us in our first steps of using La Crosse Technology WT-5442
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with La Crosse Technology WT-5442
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of La Crosse Technology WT-5442 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning La Crosse Technology WT-5442?

Use the form below

If you did not solve your problem by using a manual La Crosse Technology WT-5442, ask a question using the form below. If a user had a similar problem with La Crosse Technology WT-5442 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)