Bedienungsanleitung ResMed vpap-st

15 Seiten 0.46 mb
Download

Zur Seite of 15

Summary
  • ResMed vpap-st - page 1

    Making quality of care easy Respiratory Care Solutions Welcome Guide English VP AP ™ S T- A NONINV ASIVE VENTILA TOR ...

  • ResMed vpap-st - page 2

    Making quality of care easy Respiratory Care Solutions ...

  • ResMed vpap-st - page 3

    Welcome Thank y ou for c hoosing the VP AP ST -A. Bef ore operating the device, please read the entire W elcome and Information Guides. VP AP ST -A at a glance The VP AP ST -A system comprises the f ollowing elements: • VP AP S T -A device • Air tubing • 90W pow er supply unit • S9 T ravel bag • SD card • S9 SD card protective f older . ...

  • ResMed vpap-st - page 4

    Setting up 1. Connect the DC plug of the pow er supply unit to the rear of the device. 2. Connect the pow er cord to the power supply unit. 3. Plug the other end of the pow er cord into the power outlet. 4. Connect one end of the air tubing firmly onto the air outlet. 5. Connect the assembled mask system to the free end of the air t ubing . Notes: ...

  • ResMed vpap-st - page 5

    VP AP ST -A basics The control panel of y our device includes an LCD screen as well as a Start/Stop button, P ush dial, Alarm mute but ton, Info and Set up menu ke ys. Info menu Allows you to view your sleep statistics or exit from the menu. Setup menu Allows you to make changes to settings or exit from the menu. Start/Stop button Starts or stops t ...

  • ResMed vpap-st - page 6

    Adjusting r amp time Designed to make the beginning of treatment more comf ort able, ramp time is the period during whic h the pressure increases from a low start pressure to the treatment pressure. T o adjust y our ramp time: Using Mask Fit Y ou can use Mask Fit to help you fit y our mask properly . This f eature deliv ers CP AP pressure for a thr ...

  • ResMed vpap-st - page 7

    Selecting the mask type T o select your type of mask: 1. Press . The SETTINGS screen is display ed. 2. T urn until Mask is display ed in blue. 3. Press . The selection is highlighted in orange. 4. T urn until the mask set ting that you require is display ed. 5. Press to confirm your c hoice. 6. Push to return to the HOME screen. S9 Essentials S9 Es ...

  • ResMed vpap-st - page 8

    Getting star ted 1. Make sure the po wer is connected. 2. Adjust the ramp time or humidification le vel if required. 3. Fit your mask as described in y our mask user guide. 4. T o st art therapy , simply breathe into the mask and/or press . 5. Lie down and arrange the air t ubing so that it is free to move if y ou turn in y our sleep. 6. T o stop t ...

  • ResMed vpap-st - page 9

    Viewing the tr eatment screens Depending on how the sy stem has been configured, you will see one of the follo wing example screens (shown in S T mode) once therapy has started: 9 H5i humidifier 9 H5i humidifier 9 ClimateLine or ClimateLine MAX 9 Climate Control – A uto 9 H5i humidifier 9 ClimateLine or ClimateLine MAX 9 Climate Control – Manua ...

  • ResMed vpap-st - page 10

    T o toggle bet ween the treatment screens, press from your HOME screen. 9 T reatment with device trigger (Timed) and cycle (Timed, Ti Max or Ti Min) breath indicators 9 T reatment with spont aneous trigger and cycled breaths 9 T reatment with alarm functionality Viewing the Info menu The Inf o menu has a series of screens showing your sleep quality ...

  • ResMed vpap-st - page 11

    Viewing alar ms The VP AP ST -A is fit ted with an alarm module that continuously monitors both therapy and device conditions. Alarms are only activ ated when therapy is running. An alarm condition is indicated b y an audible sound, a flashing yello w alarm LED and a message on the screen. When the device is t urned on, the yello w alarm LED will f ...

  • ResMed vpap-st - page 12

    Cleaning and maintenance Y ou should regularly carr y out cleaning and maintenance as described in this section. Ref er to your mask and humidifier user guides f or det ailed instructions regarding the care of these devices. Daily Remo ve the air tubing b y pulling on the finger grips on the cuff . Hang it in a clean, dr y place until next use. Not ...

  • ResMed vpap-st - page 13

    SD card An SD card has been supplied to gather therapy data from your de vice and provide set tings updates from your clinician. When instructed to do so, disconnect the device from the pow er outlet, remove y our SD card, insert it in the protective folder and send it to y our clinician. Removing the car d 1. Push in the SD card to release it. 2. ...

  • ResMed vpap-st - page 14

    Making quality of care easy Respiratory Care Solutions ...

  • ResMed vpap-st - page 15

    Gl oba l le ad er s in sl ee p an d re sp ira tor y m ed ic in e ww w .resme d.com Manufacturer: ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia. Distributed by: ResMed Corp 9001 Spectrum Center Boulevard San Diego CA 92123 USA. ResMed (UK) Ltd 96 Milton Park Abingdon Oxfordshire OX144RY UK. See www .resmed.com for other Re ...

Produzent ResMed Kategorie Ventilation Hood

Dokumente, die wir vom Produzenten des Geräts ResMed vpap-st erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen ResMed
- Bedienungsanleitungen vpap-st
- Produktkarten ResMed
- Informationsbroschüren
- oder Energieetiketten ResMed vpap-st
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung ResMed vpap-st.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen ResMed vpap-st, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen ResMed vpap-st. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts ResMed vpap-st ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts ResMed vpap-st, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von ResMed vpap-st hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von ResMed vpap-st verständlich ist.

Eine gänzliche Bedienungsanleitung von ResMed sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von ResMed vpap-st bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von ResMed vpap-st befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich ResMed vpap-st, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts ResMed vpap-st - die uns die ersten Schritte während der Nutzung von ResMed vpap-st erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit ResMed vpap-st hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von ResMed vpap-st im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich ResMed vpap-st?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit ResMed vpap-st nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit ResMed vpap-st hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)