Deutsch dropdown-ico

Bedienungsanleitung IOGear GWU647

52 Seiten 1.99 mb
Download

Zur Seite of 52

Summary
  • IOGear GWU647 - page 1

    Installation Installation Guide Universal 5-Port Wi-Fi N Ether net Hub GWU647 P ART NO. M1200 ...

  • IOGear GWU647 - page 2

    ...

  • IOGear GWU647 - page 3

    3 T able of Contents Package Contents 4 System Requirements 5 Product Overview 6 Installation 8 Installation without WPS - Windows XP 10 Installation without WPS - Windows Vista 16 Installation without WPS - Windows 7 24 Installation without WPS - Mac 32 Manual Set Up 37 Firmware Upgrade 41 Federal Communications Commission (FCC) Statement 46 CE Co ...

  • IOGear GWU647 - page 4

    4 Package Contents • 1 X Universal 5-Port Wi-Fi N Ether net Hub • 1 X AC to USB Power Cable • 1 X AC to USB Power Adapter • 1 X Ethernet Cable • 1 X Quick Start Guide • 1 x W arranty Card ...

  • IOGear GWU647 - page 5

    5 System Requirements • Operating System - Windows XP , W indows Vista, Windows 7 - Mac OS X v10.4 and above • Wireless network with WPS setup • Wireless network without WPS setup and computer ...

  • IOGear GWU647 - page 6

    WPS Reset PWR 5 1 2 3 4 6 Product Overview 2 3 1 4 1. WPS Button Push and hold the WPS button for 5~10 seconds to enable the WPS feature. 2. Ethernet Port The Ethernet port allows a LAN connection through Cat 5 cables. Supports auto-sensing at 10/100M speed, half/ full duplex. 3. AC Power AC Power Adapter 4. Reset Button Push and hold the reset but ...

  • IOGear GWU647 - page 7

    7 LED Indicator State Description 1 2 3 4 1. LAN LED Flashing - Data is transmitting or receiving on the LAN interface. On - Port linked. Off – No link. 2. WPS LED Flashing - The WPS feature is enabled and in use. Off - The WPS featur e is not in use. 3. WLAN LED Flashing - WLAN is transmitting or receiving data. Off - WLAN is of f 4. Power LED O ...

  • IOGear GWU647 - page 8

    8 Installation Wireless Setup with WPS Step 1: Power on your Universal WiFi Hub using either of these methods: •ConnecttheACAdaptercabletoadevice.Make sure that the device wher e you connect the AC Adapter cable is powered on. •ConnecttheWiFiHubtoanelectricaloutletwith the included pow ...

  • IOGear GWU647 - page 9

    WPS Reset PWR 5 1 2 3 4 9 Step 1 Step 3 Step 2 ...

  • IOGear GWU647 - page 10

    10 Installation without WPS - Windows XP Step 1: T urn off your computer’ s wireless connection (if applicable) and disconnect the Ethernet cable currently connect to your computer (if applicable). Step 2: Use the included RJ-45 Ethernet cable to connect the WiFi Hub with your computer . Step 3: Set your computer with a static IP address. a. Righ ...

  • IOGear GWU647 - page 11

    11 b. Next, right click on “Local Area Connection” and select “Properties” . ...

  • IOGear GWU647 - page 12

    12 c. Select “Internet Protocol (TCP/IP)” then select “Properties” . D. Select “Use the following IP address” and enter 192.168.1.3 in the IP address section. Next enter 255.255.255.0 in the Subnet Mask. Click OK. ...

  • IOGear GWU647 - page 13

    13 Step 4: Open your web browser and enter 192.168.1.252 .Thiswillbringuptheconguration utility . Click “Site Survey” to scan for your wir eless network. ...

  • IOGear GWU647 - page 14

    14 Step 5: Select the AP you want to connect to and enter the password if the network is secur ed. Click the “Connect” button to establish the connection. If your network security settings are set to not br oadcast your SSID, then you will need to manually set up the SSID and the wireless security (WEP or WP A). (Please see Page. 37) ...

  • IOGear GWU647 - page 15

    15 Step 6: Close your browser and change the network settings on your computer back to DHCP (Obtain an IP address Automatically & Obtain DNS server address automatically). Refer to steps 3a through 3d. Also do not forget to enable your wireless connection if you disabled it. Step 7: Disconnect the Ethernet cable from your computer . Step 8: Use ...

  • IOGear GWU647 - page 16

    16 Installation without WPS - Windows Vista Step 1: T urn off your computer’ s wireless connection (if applicable) and disconnect the Ethernet cable cur - rently connect to your computer (if applicable). Step 2: Use the included RJ-45 Ethernet cable to connect the W iFi Hub with your computer . Step 3: Set your computer with a static IP address. ...

  • IOGear GWU647 - page 17

    17 b. Under Network and Internet, click “View network status and tasks” . ...

  • IOGear GWU647 - page 18

    18 c. Under T asks in the left pane, click “Manage network connections” . d. Next, right click on “Local Area Connection” and click “Properties” . ...

  • IOGear GWU647 - page 19

    19 e. Next, select “Internet Protocol V ersion 4 (TCP/IPv4)” and click “Properties” ...

  • IOGear GWU647 - page 20

    20 f. Select “Use the following IP address” and enter 192.168.1.3 in the IP address section. Next enter 255.255.255.0 in the Subnet Mask. Click OK. ...

  • IOGear GWU647 - page 21

    21 Step 4: Open your web browser and enter 192.168.1.252 .Thiswillbringupthecongurationutility .Click “ Site Survey ” to scan for your wireless network. ...

  • IOGear GWU647 - page 22

    22 Step 5: Select the AP you want to connect to and enter the password if the network is secur ed. Click the “Connect” button to establish the connection. If your network security settings are set to not br oadcast your SSID, then you will need to manually set up the SSID and the wireless security (WEP or WP A). (Please see Page. 37) ...

  • IOGear GWU647 - page 23

    23 Step 6: Close your browser and change the network settings on your computer back to DHCP (Obtain an IP address Automatically & Obtain DNS server address automatically). Refer to steps 3a through 3d. Also do not forget to enable your wireless connection if you disabled it. Step 7: Disconnect the Ethernet cable from your computer . Step 8: Use ...

  • IOGear GWU647 - page 24

    24 Installation without WPS - Windows 7 Step 1: T urn off your computer’ s wireless connection (if applicable) and disconnect the Ethernet cable cur - rently connect to your computer (if applicable). Step 2: Use the included RJ-45 Ethernet cable to connect the W iFi Hub with your computer . Step 3: Set your computer with a static IP address. a. C ...

  • IOGear GWU647 - page 25

    25 b. Under Network and Internet, click “View network status and tasks” . ...

  • IOGear GWU647 - page 26

    26 c. Under T asks in the left pane, click “Change Adapter Settings” . d. Next, right click on “Local Area Connection” and click “Properties” . ...

  • IOGear GWU647 - page 27

    27 e. Next, select “Internet Protocol V ersion 4 (TCP/IPv4)” and click “Properties” ...

  • IOGear GWU647 - page 28

    28 f. Select “Use the following IP address” and enter 192.168.1.3 in the IP address section. Next enter 255.255.255.0 in the Subnet Mask. Click OK. ...

  • IOGear GWU647 - page 29

    29 Step 4: Open your web browser and enter 192.168.1.252 .Thiswillbringuptheconguration utility . Click “ Site Survey ” to scan for your wireless network. ...

  • IOGear GWU647 - page 30

    30 Step 5: Select the AP you want to connect and enter the password if the network is secur ed. Click “Con- nect” button to establish the connection. If your network security settings are set to not br oadcast your SSID, then you will need to manually set up the SSID and the wireless security (WEP or WP A). (Please see Page. 37) ...

  • IOGear GWU647 - page 31

    31 Step 6: Close your browser and change the network settings on your computer back to DHCP (Obtain an IP address Automatically & Obtain DNS server address automatically). Refer to steps 3a through 3d. Also do not forget to enable your wireless connection if you disabled it. Step 7: Disconnect the Ethernet cable from your computer . Step 8: Use ...

  • IOGear GWU647 - page 32

    32 Installation without WPS - Mac Step 1: T urn off your computer’ s wireless con- nection (if applicable) and disconnect the Ethernet cable currently connect to your computer (if ap- plicable). Step 2: Use the included RJ-45 Ethernet cable to connect the WiFi Hub with your computer . Step 3: Set your computer with a static IP address. a. Open sy ...

  • IOGear GWU647 - page 33

    33 b. Select your Ethernet connection in the left pane. NextchangeconguretoManualandenter IP address 192.168.1.100 and Subnet Mask 255.255.255.0. Remove any entries in the Router and DNS boxes then click Apply . ...

  • IOGear GWU647 - page 34

    34 Step 4: Open your web browser and enter 192.168.1.252 .Thiswillbringuptheconguration utility . Click “ Site Survey ” to scan for your wireless network. ...

  • IOGear GWU647 - page 35

    35 Step 5: Select the AP you want to connect to and enter the password if the network is secur ed. Click the “Connect” button to establish the connection. If your network security settings are set to not broadcast your SSID, then you will need to manually set up the SSID and the wireless security (WEP or WP A). (Please see Page. 37) ...

  • IOGear GWU647 - page 36

    36 Step 6: Close your browser and change the network settings on your computer back to DHCP . Refer to steps 3a through 3b. Step 7: Disconnect the Ethernet cable from your computer . Step 8: Use the included RJ-45 Ethernet cable to connect the W iFi Hub with your device such as a Blu-Ray player , HDTV , or game colsole. Step 9: Power on your Hub us ...

  • IOGear GWU647 - page 37

    37 Manual Set Up If your network security settings are set to not br oadcast your SSID, then you will need to manually set up the SSID and the wireless security (WEP or WP A). Step 1: Click “Manual WLAN Setup” to start the Setup Wizard ...

  • IOGear GWU647 - page 38

    38 Step 2: Click “Next” Step 3: Enter your networks SSID and click “Next” ...

  • IOGear GWU647 - page 39

    39 Step 4: Enter your encryption information and click “Finished” Step 5: The Universal Wi-Fi Hub will now reboot. ...

  • IOGear GWU647 - page 40

    40 Step 6: Close your browser and change the network settings on your computer back to DHCP (Obtain an IP address Automatically & Obtain DNS server addr ess automatically). Also do not forget to enable your wireless connection if you disabled it. Step 7: Disconnect the Ethernet cable from your computer . Step 8: Use the included RJ-45 Ethernet ...

  • IOGear GWU647 - page 41

    41 Firmware Upgrade Note: Ifarmwareupdateisavailable,itwillbe posted on iogear .com. Please check http://www .iogear .com/support/dm/ Step 1: T urn off your computer’ s wireless connection (if applicable) and disconnect the Ethernet cable currently connect to your computer (if applicable). Step 2: Use the included ...

  • IOGear GWU647 - page 42

    42 Step 5: Click “Browse” andlocatedyourrmwar ele,selectit,andclick “Open” . ...

  • IOGear GWU647 - page 43

    43 Step 6: Click “Upload” tostartthermwareupgradepr ocess. ...

  • IOGear GWU647 - page 44

    44 Firmware update complete. W ait for the device to reboot before disconnecting. ...

  • IOGear GWU647 - page 45

    45 Oncethedeviceisnishedrebooting,youwillseea statusscreen.Checkyoursettings.Afterarmwar e upgrade,theUniversalWiHubmayresetback to factory settings and need to be set up for your network again. ...

  • IOGear GWU647 - page 46

    46 Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pr ovide reasonable protection against harmful inter - ference in a r esidential setting. This product generates, uses, and can radia ...

  • IOGear GWU647 - page 47

    47 This device has been tested and found to comply with the following European Union dir ectives: Electro- magnetic Capability (89/336/EMC), Low V oltage (73/23/EEC) and R&TTED (1999/5/EC). CE Compliance ...

  • IOGear GWU647 - page 48

    48 The following contains information that relates to China. SJ/T 11364-2006 部件名称 有毒有害物质或元素 铅 (Pb) 汞 (Hg) 镉（Cd） 六价 (Cr(VI)) 多溴联苯 （PBB） 多溴二苯醚 （PBDE） 电器部件 ● ○ ○ ○ ○ ○ 机构部件 ○ ○ ○ ○ ○ ○ ○:表示该有毒有害物质在该部件所有均质材料? ...

  • IOGear GWU647 - page 49

    49 IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT , INDIRECT , SPECIAL, INCIDENT AL OR CONSEQUENTIAL DAMAGES RESUL TING FROM THE USE OF THE PRODUCT , DISK, OR ITS DOCUMENT A TION EXCEED THE PRICE P AID FOR THE PRODUCT . The direct vendor makes no warranty or r epresentation, expressed, implied, or statutory with respect to the content ...

  • IOGear GWU647 - page 50

    50 IOGEAR 19641 Da Vinci Foothill Ranch, CA 92610 P 949.453.8782 F 949.453.8785 Visit us at: www .iogear .com Contact © 2011 IOGEAR ® Part No. M1200 IOGEAR, the IOGEAR logo, are trademarks or register ed trademarks of IOGEAR. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other brand and product names are trademarks ...

  • IOGear GWU647 - page 51

    51 ...

  • IOGear GWU647 - page 52

    © 2011 IOGEAR ® FUN IOGEAR offers connectivity solutions that ar e innovative, fun, and stylish, helping people enjoy daily life using our high technology products. GREEN IOGEAR is an environmentally conscious company that emphasizes the importance of conserving natural resour ces. The use of our technology solut io ns helps reduce electr onic wa ...

Produzent IOGear Kategorie Switch

Dokumente, die wir vom Produzenten des Geräts IOGear GWU647 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen IOGear
- Bedienungsanleitungen GWU647
- Produktkarten IOGear
- Informationsbroschüren
- oder Energieetiketten IOGear GWU647
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung IOGear GWU647.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen IOGear GWU647, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen IOGear GWU647. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts IOGear GWU647 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts IOGear GWU647, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von IOGear GWU647 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von IOGear GWU647 verständlich ist.

Eine gänzliche Bedienungsanleitung von IOGear sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von IOGear GWU647 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von IOGear GWU647 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich IOGear GWU647, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts IOGear GWU647 - die uns die ersten Schritte während der Nutzung von IOGear GWU647 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit IOGear GWU647 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von IOGear GWU647 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich IOGear GWU647?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit IOGear GWU647 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit IOGear GWU647 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)