Italiano dropdown-ico

Manuale per l’uso IOGear GWU647

52 pagine 1.99 mb
Scarica

Vai alla pagina of 52

Summary
  • IOGear GWU647 - page 1

    Installation Installation Guide Universal 5-Port Wi-Fi N Ether net Hub GWU647 P ART NO. M1200 ...

  • IOGear GWU647 - page 2

    ...

  • IOGear GWU647 - page 3

    3 T able of Contents Package Contents 4 System Requirements 5 Product Overview 6 Installation 8 Installation without WPS - Windows XP 10 Installation without WPS - Windows Vista 16 Installation without WPS - Windows 7 24 Installation without WPS - Mac 32 Manual Set Up 37 Firmware Upgrade 41 Federal Communications Commission (FCC) Statement 46 CE Co ...

  • IOGear GWU647 - page 4

    4 Package Contents • 1 X Universal 5-Port Wi-Fi N Ether net Hub • 1 X AC to USB Power Cable • 1 X AC to USB Power Adapter • 1 X Ethernet Cable • 1 X Quick Start Guide • 1 x W arranty Card ...

  • IOGear GWU647 - page 5

    5 System Requirements • Operating System - Windows XP , W indows Vista, Windows 7 - Mac OS X v10.4 and above • Wireless network with WPS setup • Wireless network without WPS setup and computer ...

  • IOGear GWU647 - page 6

    WPS Reset PWR 5 1 2 3 4 6 Product Overview 2 3 1 4 1. WPS Button Push and hold the WPS button for 5~10 seconds to enable the WPS feature. 2. Ethernet Port The Ethernet port allows a LAN connection through Cat 5 cables. Supports auto-sensing at 10/100M speed, half/ full duplex. 3. AC Power AC Power Adapter 4. Reset Button Push and hold the reset but ...

  • IOGear GWU647 - page 7

    7 LED Indicator State Description 1 2 3 4 1. LAN LED Flashing - Data is transmitting or receiving on the LAN interface. On - Port linked. Off – No link. 2. WPS LED Flashing - The WPS feature is enabled and in use. Off - The WPS featur e is not in use. 3. WLAN LED Flashing - WLAN is transmitting or receiving data. Off - WLAN is of f 4. Power LED O ...

  • IOGear GWU647 - page 8

    8 Installation Wireless Setup with WPS Step 1: Power on your Universal WiFi Hub using either of these methods: •ConnecttheACAdaptercabletoadevice.Make sure that the device wher e you connect the AC Adapter cable is powered on. •ConnecttheWiFiHubtoanelectricaloutletwith the included pow ...

  • IOGear GWU647 - page 9

    WPS Reset PWR 5 1 2 3 4 9 Step 1 Step 3 Step 2 ...

  • IOGear GWU647 - page 10

    10 Installation without WPS - Windows XP Step 1: T urn off your computer’ s wireless connection (if applicable) and disconnect the Ethernet cable currently connect to your computer (if applicable). Step 2: Use the included RJ-45 Ethernet cable to connect the WiFi Hub with your computer . Step 3: Set your computer with a static IP address. a. Righ ...

  • IOGear GWU647 - page 11

    11 b. Next, right click on “Local Area Connection” and select “Properties” . ...

  • IOGear GWU647 - page 12

    12 c. Select “Internet Protocol (TCP/IP)” then select “Properties” . D. Select “Use the following IP address” and enter 192.168.1.3 in the IP address section. Next enter 255.255.255.0 in the Subnet Mask. Click OK. ...

  • IOGear GWU647 - page 13

    13 Step 4: Open your web browser and enter 192.168.1.252 .Thiswillbringuptheconguration utility . Click “Site Survey” to scan for your wir eless network. ...

  • IOGear GWU647 - page 14

    14 Step 5: Select the AP you want to connect to and enter the password if the network is secur ed. Click the “Connect” button to establish the connection. If your network security settings are set to not br oadcast your SSID, then you will need to manually set up the SSID and the wireless security (WEP or WP A). (Please see Page. 37) ...

  • IOGear GWU647 - page 15

    15 Step 6: Close your browser and change the network settings on your computer back to DHCP (Obtain an IP address Automatically & Obtain DNS server address automatically). Refer to steps 3a through 3d. Also do not forget to enable your wireless connection if you disabled it. Step 7: Disconnect the Ethernet cable from your computer . Step 8: Use ...

  • IOGear GWU647 - page 16

    16 Installation without WPS - Windows Vista Step 1: T urn off your computer’ s wireless connection (if applicable) and disconnect the Ethernet cable cur - rently connect to your computer (if applicable). Step 2: Use the included RJ-45 Ethernet cable to connect the W iFi Hub with your computer . Step 3: Set your computer with a static IP address. ...

  • IOGear GWU647 - page 17

    17 b. Under Network and Internet, click “View network status and tasks” . ...

  • IOGear GWU647 - page 18

    18 c. Under T asks in the left pane, click “Manage network connections” . d. Next, right click on “Local Area Connection” and click “Properties” . ...

  • IOGear GWU647 - page 19

    19 e. Next, select “Internet Protocol V ersion 4 (TCP/IPv4)” and click “Properties” ...

  • IOGear GWU647 - page 20

    20 f. Select “Use the following IP address” and enter 192.168.1.3 in the IP address section. Next enter 255.255.255.0 in the Subnet Mask. Click OK. ...

  • IOGear GWU647 - page 21

    21 Step 4: Open your web browser and enter 192.168.1.252 .Thiswillbringupthecongurationutility .Click “ Site Survey ” to scan for your wireless network. ...

  • IOGear GWU647 - page 22

    22 Step 5: Select the AP you want to connect to and enter the password if the network is secur ed. Click the “Connect” button to establish the connection. If your network security settings are set to not br oadcast your SSID, then you will need to manually set up the SSID and the wireless security (WEP or WP A). (Please see Page. 37) ...

  • IOGear GWU647 - page 23

    23 Step 6: Close your browser and change the network settings on your computer back to DHCP (Obtain an IP address Automatically & Obtain DNS server address automatically). Refer to steps 3a through 3d. Also do not forget to enable your wireless connection if you disabled it. Step 7: Disconnect the Ethernet cable from your computer . Step 8: Use ...

  • IOGear GWU647 - page 24

    24 Installation without WPS - Windows 7 Step 1: T urn off your computer’ s wireless connection (if applicable) and disconnect the Ethernet cable cur - rently connect to your computer (if applicable). Step 2: Use the included RJ-45 Ethernet cable to connect the W iFi Hub with your computer . Step 3: Set your computer with a static IP address. a. C ...

  • IOGear GWU647 - page 25

    25 b. Under Network and Internet, click “View network status and tasks” . ...

  • IOGear GWU647 - page 26

    26 c. Under T asks in the left pane, click “Change Adapter Settings” . d. Next, right click on “Local Area Connection” and click “Properties” . ...

  • IOGear GWU647 - page 27

    27 e. Next, select “Internet Protocol V ersion 4 (TCP/IPv4)” and click “Properties” ...

  • IOGear GWU647 - page 28

    28 f. Select “Use the following IP address” and enter 192.168.1.3 in the IP address section. Next enter 255.255.255.0 in the Subnet Mask. Click OK. ...

  • IOGear GWU647 - page 29

    29 Step 4: Open your web browser and enter 192.168.1.252 .Thiswillbringuptheconguration utility . Click “ Site Survey ” to scan for your wireless network. ...

  • IOGear GWU647 - page 30

    30 Step 5: Select the AP you want to connect and enter the password if the network is secur ed. Click “Con- nect” button to establish the connection. If your network security settings are set to not br oadcast your SSID, then you will need to manually set up the SSID and the wireless security (WEP or WP A). (Please see Page. 37) ...

  • IOGear GWU647 - page 31

    31 Step 6: Close your browser and change the network settings on your computer back to DHCP (Obtain an IP address Automatically & Obtain DNS server address automatically). Refer to steps 3a through 3d. Also do not forget to enable your wireless connection if you disabled it. Step 7: Disconnect the Ethernet cable from your computer . Step 8: Use ...

  • IOGear GWU647 - page 32

    32 Installation without WPS - Mac Step 1: T urn off your computer’ s wireless con- nection (if applicable) and disconnect the Ethernet cable currently connect to your computer (if ap- plicable). Step 2: Use the included RJ-45 Ethernet cable to connect the WiFi Hub with your computer . Step 3: Set your computer with a static IP address. a. Open sy ...

  • IOGear GWU647 - page 33

    33 b. Select your Ethernet connection in the left pane. NextchangeconguretoManualandenter IP address 192.168.1.100 and Subnet Mask 255.255.255.0. Remove any entries in the Router and DNS boxes then click Apply . ...

  • IOGear GWU647 - page 34

    34 Step 4: Open your web browser and enter 192.168.1.252 .Thiswillbringuptheconguration utility . Click “ Site Survey ” to scan for your wireless network. ...

  • IOGear GWU647 - page 35

    35 Step 5: Select the AP you want to connect to and enter the password if the network is secur ed. Click the “Connect” button to establish the connection. If your network security settings are set to not broadcast your SSID, then you will need to manually set up the SSID and the wireless security (WEP or WP A). (Please see Page. 37) ...

  • IOGear GWU647 - page 36

    36 Step 6: Close your browser and change the network settings on your computer back to DHCP . Refer to steps 3a through 3b. Step 7: Disconnect the Ethernet cable from your computer . Step 8: Use the included RJ-45 Ethernet cable to connect the W iFi Hub with your device such as a Blu-Ray player , HDTV , or game colsole. Step 9: Power on your Hub us ...

  • IOGear GWU647 - page 37

    37 Manual Set Up If your network security settings are set to not br oadcast your SSID, then you will need to manually set up the SSID and the wireless security (WEP or WP A). Step 1: Click “Manual WLAN Setup” to start the Setup Wizard ...

  • IOGear GWU647 - page 38

    38 Step 2: Click “Next” Step 3: Enter your networks SSID and click “Next” ...

  • IOGear GWU647 - page 39

    39 Step 4: Enter your encryption information and click “Finished” Step 5: The Universal Wi-Fi Hub will now reboot. ...

  • IOGear GWU647 - page 40

    40 Step 6: Close your browser and change the network settings on your computer back to DHCP (Obtain an IP address Automatically & Obtain DNS server addr ess automatically). Also do not forget to enable your wireless connection if you disabled it. Step 7: Disconnect the Ethernet cable from your computer . Step 8: Use the included RJ-45 Ethernet ...

  • IOGear GWU647 - page 41

    41 Firmware Upgrade Note: Ifarmwareupdateisavailable,itwillbe posted on iogear .com. Please check http://www .iogear .com/support/dm/ Step 1: T urn off your computer’ s wireless connection (if applicable) and disconnect the Ethernet cable currently connect to your computer (if applicable). Step 2: Use the included ...

  • IOGear GWU647 - page 42

    42 Step 5: Click “Browse” andlocatedyourrmwar ele,selectit,andclick “Open” . ...

  • IOGear GWU647 - page 43

    43 Step 6: Click “Upload” tostartthermwareupgradepr ocess. ...

  • IOGear GWU647 - page 44

    44 Firmware update complete. W ait for the device to reboot before disconnecting. ...

  • IOGear GWU647 - page 45

    45 Oncethedeviceisnishedrebooting,youwillseea statusscreen.Checkyoursettings.Afterarmwar e upgrade,theUniversalWiHubmayresetback to factory settings and need to be set up for your network again. ...

  • IOGear GWU647 - page 46

    46 Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pr ovide reasonable protection against harmful inter - ference in a r esidential setting. This product generates, uses, and can radia ...

  • IOGear GWU647 - page 47

    47 This device has been tested and found to comply with the following European Union dir ectives: Electro- magnetic Capability (89/336/EMC), Low V oltage (73/23/EEC) and R&TTED (1999/5/EC). CE Compliance ...

  • IOGear GWU647 - page 48

    48 The following contains information that relates to China. SJ/T 11364-2006 部件名称 有毒有害物质或元素 铅 (Pb) 汞 (Hg) 镉（Cd） 六价 (Cr(VI)) 多溴联苯 （PBB） 多溴二苯醚 （PBDE） 电器部件 ● ○ ○ ○ ○ ○ 机构部件 ○ ○ ○ ○ ○ ○ ○:表示该有毒有害物质在该部件所有均质材料? ...

  • IOGear GWU647 - page 49

    49 IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT , INDIRECT , SPECIAL, INCIDENT AL OR CONSEQUENTIAL DAMAGES RESUL TING FROM THE USE OF THE PRODUCT , DISK, OR ITS DOCUMENT A TION EXCEED THE PRICE P AID FOR THE PRODUCT . The direct vendor makes no warranty or r epresentation, expressed, implied, or statutory with respect to the content ...

  • IOGear GWU647 - page 50

    50 IOGEAR 19641 Da Vinci Foothill Ranch, CA 92610 P 949.453.8782 F 949.453.8785 Visit us at: www .iogear .com Contact © 2011 IOGEAR ® Part No. M1200 IOGEAR, the IOGEAR logo, are trademarks or register ed trademarks of IOGEAR. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other brand and product names are trademarks ...

  • IOGear GWU647 - page 51

    51 ...

  • IOGear GWU647 - page 52

    © 2011 IOGEAR ® FUN IOGEAR offers connectivity solutions that ar e innovative, fun, and stylish, helping people enjoy daily life using our high technology products. GREEN IOGEAR is an environmentally conscious company that emphasizes the importance of conserving natural resour ces. The use of our technology solut io ns helps reduce electr onic wa ...

Fabbricante IOGear Categoria Switch

I documenti che otteniamo dal fabbricante del dispositivoIOGear GWU647 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici IOGear
- manuali per l’uso GWU647
- schede prodotto IOGear
- opuscoli
- o etichette energetiche IOGear GWU647
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso IOGear GWU647.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione IOGear GWU647, manuali di manutenzione, brevi manuali o manuali utente IOGear GWU647. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto IOGear GWU647.

Manuali per l’uso simili

Manuale completo del dispositivo IOGear GWU647, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare IOGear GWU647 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti IOGear GWU647.

Il manuale per l’uso completo IOGear, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale IOGear GWU647 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice IOGear GWU647, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per IOGear GWU647 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo IOGear GWU647 - che ci dovrebbe aiutare nei primi passi durante l'uso IOGear GWU647
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del IOGear GWU647
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio IOGear GWU647 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su IOGear GWU647?

Utilizza il modulo sottostante

Se non hai risolto il problema con IOGear GWU647 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con IOGear GWU647 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)