Bedienungsanleitung Ryobi OSS500

16 Seiten 2.14 mb
Download

Zur Seite of 16

Summary
  • Ryobi OSS500 - page 1

    Y our new oscillating spindle sander has been engineered and manufactured to Ryobi's high standard for dependability , ease of operation, and operator safety . Properly cared for , it will give you years of rugged, trouble-free performance. W ARNING: To reduce the risk of injury , the user must read and understand the operator ’s manual. Tha ...

  • Ryobi OSS500 - page 2

    2 INTRODUCTION ■ Introduction ........................................................................................................................................................ 2 ■ Rules for Safe Operation ....................................................................................................... ......................... 3-5 ...

  • Ryobi OSS500 - page 3

    3 RULES FOR SAFE OPERA TION Safe operation of this power tool requires that you read and understand this operator's manual and all labels affixed to the tool. Safety is a combination of common sense, staying alert, and knowing how your tool works. READ ALL INSTRUCTIONS ■ KNOW YOUR POWER TOOL. Read the operator's manual carefully. Learn ...

  • Ryobi OSS500 - page 4

    4 RULES FOR SAFE OPERA TION ■ DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON AND OFF. Have defective switches replaced by a qualified service technician at an authorized service center. ■ KEEP TOOL DRY, CLEAN, AND FREE FROM OIL AND GREASE. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petro- leum-based products, or an ...

  • Ryobi OSS500 - page 5

    5 RULES FOR SAFE OPERA TION The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper acciden ...

  • Ryobi OSS500 - page 6

    6 SPECIFICA TIONS Oscillating Range 5/8 in. (15.9 mm) Oscillations Per Minute 58 OPM Spindle Size 1/2 in. (12.7 mm) No Load Speed 2000 RPM Input 120 Volts, 60 Hz, AC only, 3.5 Amps Weight 49 lbs. (22.2 kg) UNP ACKING INFORMATION We have shipped the oscillating spindle sander completely assembled and ready to use with a 1 in. (25.4 mm) rubber spindl ...

  • Ryobi OSS500 - page 7

    7 Before using the oscillating spindle sander, familiarize yourself with all operating features and safety requirements. However, do not let familiarity with the tool make you careless. W ARNING: Exercise caution when using the oscillating spindle sander. Careless actions, for even a fraction of a second, can result in serious personal injury. SWIT ...

  • Ryobi OSS500 - page 8

    8 FEA TURES Fig. 1 W ARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. SPINDLE HEX NUT SANDING SLEEVE (1 in. (25.4 mm)) THROAT PLATE TABLE TOP THROAT PLATE STORAG ...

  • Ryobi OSS500 - page 9

    9 ADJUSTMENTS W ARNING: The sander should never be connected to a power supply when you are assembling parts, making ad- justments, cleaning, or when not in use. Disconnect- ing the tool will prevent accidental starting that could cause serious personal injury. SELECTING SANDING SLEEVES Selecting the correct size diameter, correct size grit, and co ...

  • Ryobi OSS500 - page 10

    10 ADJUSTMENTS REMOVING SANDING SLEEVES See Figure 3. Follow these directions to remove sanding sleeves. ■ Unplug the sander. W ARNING: Failure to unplug the tool could result in accidental starting causing serious injury. ■ Grasp and hold the sanding sleeve on the spindle. ■ Loosen the hex nut using the wrench provided. NOTE: If the hex nut ...

  • Ryobi OSS500 - page 11

    11 ADJUSTMENTS Fig. 5 THROAT PLATE HEX NUT UPPER SPINDLE WASHER SANDING SLEEVE SPINDLE WRENCH LOWER SPINDLE WASHER INSTALLING 1/2 INCH (12.7 mm) SANDING SLEEVES See Figure 5. Follow these directions to install 1/2 inch (12.7 mm) sanding sleeves. ■ Unplug the sander. W ARNING: Failure to unplug the tool could result in accidental starting causing ...

  • Ryobi OSS500 - page 12

    12 OPERA TION W ARNING: Always wear safety goggles or safety glasses with side shields when operating this tool. Failure to do so could result in dust, shavings, or loose particles being thrown into your eyes, resulting in possible serious injury. MOUNTING THE SANDER TO A WORK SURFACE See Figures 6 and 7. Follow these directions to mount the sander ...

  • Ryobi OSS500 - page 13

    13 OPERA TION OPERATING THE SANDER See Figures 8 and 9. Follow these directions to operate the sander. ■ Insert the switch key. ■ Turn on the sander by lifting the switch. ■ Let the motor build to its full speed. ■ Feed the workpiece gradually against the sanding sleeve from right to left. W ARNING: Do not let the workpiece contact the sand ...

  • Ryobi OSS500 - page 14

    14 W ARNING: When servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage. GENERAL Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carb ...

  • Ryobi OSS500 - page 15

    15 NOTES ...

  • Ryobi OSS500 - page 16

    OPERA T OR'S MANUAL Oscillating Spindle Sander OSS500 - Double Insulated R YOBI TECHNOLOGIES INC. 1428 Pearman Dairy Road Anderson, SC 29625 Post Office Box 1207 Anderson, SC 29622 www .ryobitools.com Phone 1-800-525-2579 983000-146 9-02 • SER VICE Now that you have purchased your tool, should a need ever exist for repair parts or service, s ...

Produzent Ryobi Kategorie Sander

Dokumente, die wir vom Produzenten des Geräts Ryobi OSS500 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Ryobi
- Bedienungsanleitungen OSS500
- Produktkarten Ryobi
- Informationsbroschüren
- oder Energieetiketten Ryobi OSS500
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Ryobi OSS500.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Ryobi OSS500, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Ryobi OSS500. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Ryobi OSS500 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Ryobi OSS500, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Ryobi OSS500 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Ryobi OSS500 verständlich ist.

Eine gänzliche Bedienungsanleitung von Ryobi sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Ryobi OSS500 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Ryobi OSS500 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Ryobi OSS500, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Ryobi OSS500 - die uns die ersten Schritte während der Nutzung von Ryobi OSS500 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Ryobi OSS500 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Ryobi OSS500 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Ryobi OSS500?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Ryobi OSS500 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Ryobi OSS500 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)