English dropdown-ico

Manual Ryobi OSS500

16 pages 2.14 mb
Download

Go to site of 16

Summary
  • Ryobi OSS500 - page 1

    Y our new oscillating spindle sander has been engineered and manufactured to Ryobi's high standard for dependability , ease of operation, and operator safety . Properly cared for , it will give you years of rugged, trouble-free performance. W ARNING: To reduce the risk of injury , the user must read and understand the operator ’s manual. Tha ...

  • Ryobi OSS500 - page 2

    2 INTRODUCTION ■ Introduction ........................................................................................................................................................ 2 ■ Rules for Safe Operation ....................................................................................................... ......................... 3-5 ...

  • Ryobi OSS500 - page 3

    3 RULES FOR SAFE OPERA TION Safe operation of this power tool requires that you read and understand this operator's manual and all labels affixed to the tool. Safety is a combination of common sense, staying alert, and knowing how your tool works. READ ALL INSTRUCTIONS ■ KNOW YOUR POWER TOOL. Read the operator's manual carefully. Learn ...

  • Ryobi OSS500 - page 4

    4 RULES FOR SAFE OPERA TION ■ DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON AND OFF. Have defective switches replaced by a qualified service technician at an authorized service center. ■ KEEP TOOL DRY, CLEAN, AND FREE FROM OIL AND GREASE. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petro- leum-based products, or an ...

  • Ryobi OSS500 - page 5

    5 RULES FOR SAFE OPERA TION The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper acciden ...

  • Ryobi OSS500 - page 6

    6 SPECIFICA TIONS Oscillating Range 5/8 in. (15.9 mm) Oscillations Per Minute 58 OPM Spindle Size 1/2 in. (12.7 mm) No Load Speed 2000 RPM Input 120 Volts, 60 Hz, AC only, 3.5 Amps Weight 49 lbs. (22.2 kg) UNP ACKING INFORMATION We have shipped the oscillating spindle sander completely assembled and ready to use with a 1 in. (25.4 mm) rubber spindl ...

  • Ryobi OSS500 - page 7

    7 Before using the oscillating spindle sander, familiarize yourself with all operating features and safety requirements. However, do not let familiarity with the tool make you careless. W ARNING: Exercise caution when using the oscillating spindle sander. Careless actions, for even a fraction of a second, can result in serious personal injury. SWIT ...

  • Ryobi OSS500 - page 8

    8 FEA TURES Fig. 1 W ARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. SPINDLE HEX NUT SANDING SLEEVE (1 in. (25.4 mm)) THROAT PLATE TABLE TOP THROAT PLATE STORAG ...

  • Ryobi OSS500 - page 9

    9 ADJUSTMENTS W ARNING: The sander should never be connected to a power supply when you are assembling parts, making ad- justments, cleaning, or when not in use. Disconnect- ing the tool will prevent accidental starting that could cause serious personal injury. SELECTING SANDING SLEEVES Selecting the correct size diameter, correct size grit, and co ...

  • Ryobi OSS500 - page 10

    10 ADJUSTMENTS REMOVING SANDING SLEEVES See Figure 3. Follow these directions to remove sanding sleeves. ■ Unplug the sander. W ARNING: Failure to unplug the tool could result in accidental starting causing serious injury. ■ Grasp and hold the sanding sleeve on the spindle. ■ Loosen the hex nut using the wrench provided. NOTE: If the hex nut ...

  • Ryobi OSS500 - page 11

    11 ADJUSTMENTS Fig. 5 THROAT PLATE HEX NUT UPPER SPINDLE WASHER SANDING SLEEVE SPINDLE WRENCH LOWER SPINDLE WASHER INSTALLING 1/2 INCH (12.7 mm) SANDING SLEEVES See Figure 5. Follow these directions to install 1/2 inch (12.7 mm) sanding sleeves. ■ Unplug the sander. W ARNING: Failure to unplug the tool could result in accidental starting causing ...

  • Ryobi OSS500 - page 12

    12 OPERA TION W ARNING: Always wear safety goggles or safety glasses with side shields when operating this tool. Failure to do so could result in dust, shavings, or loose particles being thrown into your eyes, resulting in possible serious injury. MOUNTING THE SANDER TO A WORK SURFACE See Figures 6 and 7. Follow these directions to mount the sander ...

  • Ryobi OSS500 - page 13

    13 OPERA TION OPERATING THE SANDER See Figures 8 and 9. Follow these directions to operate the sander. ■ Insert the switch key. ■ Turn on the sander by lifting the switch. ■ Let the motor build to its full speed. ■ Feed the workpiece gradually against the sanding sleeve from right to left. W ARNING: Do not let the workpiece contact the sand ...

  • Ryobi OSS500 - page 14

    14 W ARNING: When servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage. GENERAL Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carb ...

  • Ryobi OSS500 - page 15

    15 NOTES ...

  • Ryobi OSS500 - page 16

    OPERA T OR'S MANUAL Oscillating Spindle Sander OSS500 - Double Insulated R YOBI TECHNOLOGIES INC. 1428 Pearman Dairy Road Anderson, SC 29625 Post Office Box 1207 Anderson, SC 29622 www .ryobitools.com Phone 1-800-525-2579 983000-146 9-02 • SER VICE Now that you have purchased your tool, should a need ever exist for repair parts or service, s ...

Manufacturer Ryobi Category Sander

Documents that we receive from a manufacturer of a Ryobi OSS500 can be divided into several groups. They are, among others:
- Ryobi technical drawings
- OSS500 manuals
- Ryobi product data sheets
- information booklets
- or energy labels Ryobi OSS500
All of them are important, but the most important information from the point of view of use of the device are in the user manual Ryobi OSS500.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Ryobi OSS500, service manual, brief instructions and user manuals Ryobi OSS500. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Ryobi OSS500.

Similar manuals

A complete manual for the device Ryobi OSS500, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Ryobi OSS500 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Ryobi OSS500.

A complete Ryobi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Ryobi OSS500 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Ryobi OSS500, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Ryobi OSS500, that we can find in the current document
3. Tips how to use the basic functions of the device Ryobi OSS500 - which should help us in our first steps of using Ryobi OSS500
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Ryobi OSS500
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Ryobi OSS500 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Ryobi OSS500?

Use the form below

If you did not solve your problem by using a manual Ryobi OSS500, ask a question using the form below. If a user had a similar problem with Ryobi OSS500 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)