Deutsch dropdown-ico

Bedienungsanleitung HP (Hewlett-Packard) 3C509B-TP

46 Seiten 0.12 mb
Download

Zur Seite of 46

Summary
  • HP (Hewlett-Packard) 3C509B-TP - page 1

    Etherlink IIIB ISA Network Interface Card (10BT) 3C509B-TP Installation Guide ...

  • HP (Hewlett-Packard) 3C509B-TP - page 2

    Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incid ...

  • HP (Hewlett-Packard) 3C509B-TP - page 3

    1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Server Windows for Workgroups Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. DOS ODI - File Name: 3C5X9.COM Size: 42KB Date: 7/21/96 • DOS and MS-Windows ...

  • HP (Hewlett-Packard) 3C509B-TP - page 4

    1 Connecting to a Netware 3.12 Server Windows for Workgroups 4 Select “CONFIGURE NIC,” and verify the resource settings listed above under the heading “Device Configuration.” 5 If changes are required, save those changes and exit. 6 Remove the 3com cards driver diskette and insert Netware client for DOS and MS-Windows disk 1. 7 Execute INST ...

  • HP (Hewlett-Packard) 3C509B-TP - page 5

    1 Connecting to a Netware 3.12 Server Windows for Workgroups 9 Select 16-bit LAN Drivers and hit the enter key. 10 Page down the Board Drivers list to “USER SPECIFIED 16 BIT DRIVER” and hit enter. 11 Insert the 3COM Etherlink 3C509 Ethernet card and drivers disk, set the path to “A:NWCLIENT” and press enter. 12 Select “3Com Etherlink II ...

  • HP (Hewlett-Packard) 3C509B-TP - page 6

    1 Connecting to a Netware 3.12 Server Windows for Workgroups ...

  • HP (Hewlett-Packard) 3C509B-TP - page 7

    1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. • Vectra VL8 Driver Name: W95EL5X9.INF Size: 16KB Date: 6/11/97 • Vectra VL7 Driver Name: Elnk.VXD Size: 30KB Date: 7/18/96 • Vectra VE7/VE8 Driver Na ...

  • HP (Hewlett-Packard) 3C509B-TP - page 8

    1 Connecting to a Netware 3.12 Server Windows 95 SR2 5 If changes are required, save those changes and exit. 6 Remove the 3com cards driver diskette and restart the machine. 7 After windows loads, click on “Start,” to “Settings” and over to “Control Panel.” 8 Double click on “Network” and select “Add.” 9 Choose to add an adapter ...

  • HP (Hewlett-Packard) 3C509B-TP - page 9

    2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Server Windows for Workgroups Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. DOS ODI - File Name: 3C5X9.COM Size: 42KB Date: 7/21/96 • DOS and MS-Windows ...

  • HP (Hewlett-Packard) 3C509B-TP - page 10

    2 Connecting to a Netware 4.11 Server Windows for Workgroups 6 Remove the 3COM cards driver diskette and insert Netware client for DOS and MS-Windows disk 1. If you are using a Vectra VL8, go straight to step 7. If you are using a VL7 or VE7/VE8, finish the installation by using the instructions below. a Execute INSTSTALL.EXE. b Specify the setting ...

  • HP (Hewlett-Packard) 3C509B-TP - page 11

    2 Connecting to a Netware 4.11 Server Windows for Workgroups 10 Page down the Board Drivers list to “USER SPECIFIED 16 BIT DRIVER” and hit enter. 11 Insert the 3COM Etherlink 3C509 Ethernet card and drivers disk, set the path to “A:NWCLIENT” and press enter. 12 Select “3Com Etherlink III Parallel Tasking Family” and press enter. 13 Ac ...

  • HP (Hewlett-Packard) 3C509B-TP - page 12

    2 Connecting to a Netware 4.11 Server Windows for Workgroups ...

  • HP (Hewlett-Packard) 3C509B-TP - page 13

    2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. Vectra VL8 and VE7/VE8 Driver Name : W95EL5X9.INF Size: 16KB Date: 6/11/97 • Vectra VL7 Driver Name: Elnk.VXD Size: 30KB Date: 7/18/96 • Windows 95 SR2 ...

  • HP (Hewlett-Packard) 3C509B-TP - page 14

    2 Connecting to a Netware 4.11 Server Windows 95 SR2 6 Remove the 3com cards driver diskette and restart the machine. 7 After windows loads, click on “Start,” to “Settings” and over to “Control Panel.” 8 Double click on “Network” and select “Add.” 9 Choose to add an adapter, click on “Add” then on “Have Disk.” 10 Insert ...

  • HP (Hewlett-Packard) 3C509B-TP - page 15

    3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. D r i v e r N a m e : E l n k 3 . S Y S S i z e : 2 ...

  • HP (Hewlett-Packard) 3C509B-TP - page 16

    3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 7 After windows loads, open the “NETWORK” Program Group, and double- click on “Network Setup.” 8 Select the “Networks” button in the “Network Setup” dialog box. 9 Click on the “Install Microsoft Windows Network:” option, and click “OK.” 10 Click on the ...

  • HP (Hewlett-Packard) 3C509B-TP - page 17

    3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 ...

  • HP (Hewlett-Packard) 3C509B-TP - page 18

    3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 ...

  • HP (Hewlett-Packard) 3C509B-TP - page 19

    3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • 3COM Etherlink 3C509-B Ethernet card and drivers disk ver 5.0. • Vectra VL8 and VE7/VE8 Driver Name: W95EL5X9.INF Size: 16KB Date: 6/11/97 • Vectra VL7 Driver Name: Elnk.Vxd Size: 30.2KB Date: 7/18/96 • Windows 95 media. ...

  • HP (Hewlett-Packard) 3C509B-TP - page 20

    3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 under the heading “Device Configuration.” 6 If changes are required, save those changes and exit. 7 Remove the 3Com Software driver diskette and reboot the machine. 8 Click on “Start” and point to “Settings”, then select the “Control Panel.” 9 In the Control Panel group, double ...

  • HP (Hewlett-Packard) 3C509B-TP - page 21

    3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 an HP preloaded HDD, set the path to “C:MASTERSWIN95SYSTEMCABS”) 21 To complete the installation, select “Yes” to restart your computer. ...

  • HP (Hewlett-Packard) 3C509B-TP - page 22

    3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 ...

  • HP (Hewlett-Packard) 3C509B-TP - page 23

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. D r i v e r N a m e : E l n k 3 . S Y S S i z e : 2 7 K B D a t e : 7 / 1 8 / 9 6 • Mi ...

  • HP (Hewlett-Packard) 3C509B-TP - page 24

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 If you are using a Vectra VE7/VE8, follow the instructions below to complete the installation. a If changes are required, save those changes and exit. b Remove the 3COM software driver diskette and reboot the machine. c After Windows loads, open the "Main" progra ...

  • HP (Hewlett-Packard) 3C509B-TP - page 25

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 q At the "TCP/IP Configuration" screen, choose to use DHCP or enter your TCP information and click on "OK." (If you do not have the required information, contact your network administrator.) r At the "Domain/Workgroup Settings" dialog box, cli ...

  • HP (Hewlett-Packard) 3C509B-TP - page 26

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 19 Choose to install all applicable TCP/IP options and select “Continue.” (If you do not have the required information, contact your network administrator) 20 At the “Network Settings” dialog box, click on “OK.” 21 Accept the default “NWLink IPX/SPX Protocol ...

  • HP (Hewlett-Packard) 3C509B-TP - page 27

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 Windows NT Workstation 4.0 Requirements • HP Vectra with Windows NT Workstation 4.0 Service Pack 3. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver 5.0. Driver Name: Elnk3.SYS Size: 27KB Date: 7/18/96 • Microsoft Windows NT Workstation 4.0 and service pack media. ...

  • HP (Hewlett-Packard) 3C509B-TP - page 28

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 6 If changes are required, save those changes and exit. 7 Remove the 3com cards driver diskette and reboot the machine. 8 Power on the machine and allow it to boot to Windows NT Workstation 4.0. 9 Log onto the machine with administrator privileges. (If you do not have the required ...

  • HP (Hewlett-Packard) 3C509B-TP - page 29

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 25 When “Windows NT is now ready to start the network…” click on “Next.” 26 Specify your Computer Name, Workgroup or Domain and click on “Next.” (If you do not have the required information, contact your network administrator) 27 After “Network has been installed on ...

  • HP (Hewlett-Packard) 3C509B-TP - page 30

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 ...

  • HP (Hewlett-Packard) 3C509B-TP - page 31

    4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11 4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. D r i v e r N a m e : E l n k 3 . S Y S S i z e : 2 ...

  • HP (Hewlett-Packard) 3C509B-TP - page 32

    4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11 7 After windows loads, open the “NETWORK” Program Group, and double- click on “Network Setup.” 8 Select the “Networks” button in the “Network Setup” dialog box. 9 Click on the “Install Microsoft Windows Network:” option, and click “OK.” 10 Click on the ...

  • HP (Hewlett-Packard) 3C509B-TP - page 33

    4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • 3COM Etherlink 3C509-B Ethernet card and drivers disk ver 5.0. Vectra VL8 and VE7/VE8 Driver Name: W95EL5X9.INF Size:16KB Date: 6/11/97. • Vectra VL7 Driver Name: Elnk3.vxd Size: 30.2KB Date: 7/18/96. • DOS and MS-Windows fo ...

  • HP (Hewlett-Packard) 3C509B-TP - page 34

    4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 6 If changes are required, save those changes and exit. 7 Remove the 3Com Software driver diskette and reboot the machine. 8 Click on “Start” and point to “Settings”, then select the “Control Panel.” 9 In the Control Panel group, double click on the “Network” icon . 10 In the ? ...

  • HP (Hewlett-Packard) 3C509B-TP - page 35

    4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 “C:MASTERSWIN95SYSTEMCABS”) 22 To complete the installation, select “Yes” to restart your computer. ...

  • HP (Hewlett-Packard) 3C509B-TP - page 36

    4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 ...

  • HP (Hewlett-Packard) 3C509B-TP - page 37

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0.Driver N a m e : E l n k 3 . S Y S S i z e : 2 7 K B D a t e : 7 / 1 8 / 9 6 • Microsoft ...

  • HP (Hewlett-Packard) 3C509B-TP - page 38

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 7 Remove the 3com software driver diskette and reboot the machine. 8 After windows loads, open the “Main” program group, double-click on “Control Panel” icon. 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer. 10 In ...

  • HP (Hewlett-Packard) 3C509B-TP - page 39

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 administrator) 23 At the “Domain/Workgroup Settings” Dialog Box, click on “OK” to accept the default “Workgroup” as your workgroup name. (If you do not have the required information, contact your network administrator) 24 To complete the installation, remove the ...

  • HP (Hewlett-Packard) 3C509B-TP - page 40

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 ...

  • HP (Hewlett-Packard) 3C509B-TP - page 41

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 Windows NT Workstation 4.0 Requirements • HP Vectra with Windows NT Workstation 4.0 Service Pack 3. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver 5.0. Driver Name: Elnk3.SYS Size: 27KB Date: 7/18/96 • Microsoft Windows NT Workstation 4.0 and service pack media. ( ...

  • HP (Hewlett-Packard) 3C509B-TP - page 42

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 6 If changes are required, save those changes and exit. 7 Remove the 3com cards driver diskette and reboot the machine. 8 Power on the machine and allow it to boot to Windows NT Workstation 4.0. 9 Log onto the machine with administrator privileges. (If you do not have the required i ...

  • HP (Hewlett-Packard) 3C509B-TP - page 43

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 25 When “Windows NT is now ready to start the network…” click on “Next.” 26 Specify your Computer Name, Workgroup or Domain and click on “Next.” (If you do not have the required information, contact your network administrator) 27 After “Network has been installed on ...

  • HP (Hewlett-Packard) 3C509B-TP - page 44

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 ...

  • HP (Hewlett-Packard) 3C509B-TP - page 45

    ...

  • HP (Hewlett-Packard) 3C509B-TP - page 46

    V ersion Number 3Com 3c509 Rev .1 ...

Produzent HP (Hewlett-Packard) Kategorie Network Card

Dokumente, die wir vom Produzenten des Geräts HP (Hewlett-Packard) 3C509B-TP erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen HP (Hewlett-Packard)
- Bedienungsanleitungen 3C509B-TP
- Produktkarten HP (Hewlett-Packard)
- Informationsbroschüren
- oder Energieetiketten HP (Hewlett-Packard) 3C509B-TP
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung HP (Hewlett-Packard) 3C509B-TP.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen HP (Hewlett-Packard) 3C509B-TP, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen HP (Hewlett-Packard) 3C509B-TP. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts HP (Hewlett-Packard) 3C509B-TP ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts HP (Hewlett-Packard) 3C509B-TP, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von HP (Hewlett-Packard) 3C509B-TP hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von HP (Hewlett-Packard) 3C509B-TP verständlich ist.

Eine gänzliche Bedienungsanleitung von HP (Hewlett-Packard) sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von HP (Hewlett-Packard) 3C509B-TP bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von HP (Hewlett-Packard) 3C509B-TP befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich HP (Hewlett-Packard) 3C509B-TP, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts HP (Hewlett-Packard) 3C509B-TP - die uns die ersten Schritte während der Nutzung von HP (Hewlett-Packard) 3C509B-TP erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit HP (Hewlett-Packard) 3C509B-TP hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von HP (Hewlett-Packard) 3C509B-TP im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich HP (Hewlett-Packard) 3C509B-TP?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit HP (Hewlett-Packard) 3C509B-TP nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit HP (Hewlett-Packard) 3C509B-TP hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Captcha
Neues Bild

Kommentare (0)