Español dropdown-ico

Manual de instrucciones HP (Hewlett-Packard) 3C509B-TP

46 de páginas 0.12 mb
Descargar

Pasar a la página of 46

Summary
  • HP (Hewlett-Packard) 3C509B-TP - page 1

    Etherlink IIIB ISA Network Interface Card (10BT) 3C509B-TP Installation Guide ...

  • HP (Hewlett-Packard) 3C509B-TP - page 2

    Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incid ...

  • HP (Hewlett-Packard) 3C509B-TP - page 3

    1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Server Windows for Workgroups Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. DOS ODI - File Name: 3C5X9.COM Size: 42KB Date: 7/21/96 • DOS and MS-Windows ...

  • HP (Hewlett-Packard) 3C509B-TP - page 4

    1 Connecting to a Netware 3.12 Server Windows for Workgroups 4 Select “CONFIGURE NIC,” and verify the resource settings listed above under the heading “Device Configuration.” 5 If changes are required, save those changes and exit. 6 Remove the 3com cards driver diskette and insert Netware client for DOS and MS-Windows disk 1. 7 Execute INST ...

  • HP (Hewlett-Packard) 3C509B-TP - page 5

    1 Connecting to a Netware 3.12 Server Windows for Workgroups 9 Select 16-bit LAN Drivers and hit the enter key. 10 Page down the Board Drivers list to “USER SPECIFIED 16 BIT DRIVER” and hit enter. 11 Insert the 3COM Etherlink 3C509 Ethernet card and drivers disk, set the path to “A:NWCLIENT” and press enter. 12 Select “3Com Etherlink II ...

  • HP (Hewlett-Packard) 3C509B-TP - page 6

    1 Connecting to a Netware 3.12 Server Windows for Workgroups ...

  • HP (Hewlett-Packard) 3C509B-TP - page 7

    1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. • Vectra VL8 Driver Name: W95EL5X9.INF Size: 16KB Date: 6/11/97 • Vectra VL7 Driver Name: Elnk.VXD Size: 30KB Date: 7/18/96 • Vectra VE7/VE8 Driver Na ...

  • HP (Hewlett-Packard) 3C509B-TP - page 8

    1 Connecting to a Netware 3.12 Server Windows 95 SR2 5 If changes are required, save those changes and exit. 6 Remove the 3com cards driver diskette and restart the machine. 7 After windows loads, click on “Start,” to “Settings” and over to “Control Panel.” 8 Double click on “Network” and select “Add.” 9 Choose to add an adapter ...

  • HP (Hewlett-Packard) 3C509B-TP - page 9

    2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Server Windows for Workgroups Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. DOS ODI - File Name: 3C5X9.COM Size: 42KB Date: 7/21/96 • DOS and MS-Windows ...

  • HP (Hewlett-Packard) 3C509B-TP - page 10

    2 Connecting to a Netware 4.11 Server Windows for Workgroups 6 Remove the 3COM cards driver diskette and insert Netware client for DOS and MS-Windows disk 1. If you are using a Vectra VL8, go straight to step 7. If you are using a VL7 or VE7/VE8, finish the installation by using the instructions below. a Execute INSTSTALL.EXE. b Specify the setting ...

  • HP (Hewlett-Packard) 3C509B-TP - page 11

    2 Connecting to a Netware 4.11 Server Windows for Workgroups 10 Page down the Board Drivers list to “USER SPECIFIED 16 BIT DRIVER” and hit enter. 11 Insert the 3COM Etherlink 3C509 Ethernet card and drivers disk, set the path to “A:NWCLIENT” and press enter. 12 Select “3Com Etherlink III Parallel Tasking Family” and press enter. 13 Ac ...

  • HP (Hewlett-Packard) 3C509B-TP - page 12

    2 Connecting to a Netware 4.11 Server Windows for Workgroups ...

  • HP (Hewlett-Packard) 3C509B-TP - page 13

    2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. Vectra VL8 and VE7/VE8 Driver Name : W95EL5X9.INF Size: 16KB Date: 6/11/97 • Vectra VL7 Driver Name: Elnk.VXD Size: 30KB Date: 7/18/96 • Windows 95 SR2 ...

  • HP (Hewlett-Packard) 3C509B-TP - page 14

    2 Connecting to a Netware 4.11 Server Windows 95 SR2 6 Remove the 3com cards driver diskette and restart the machine. 7 After windows loads, click on “Start,” to “Settings” and over to “Control Panel.” 8 Double click on “Network” and select “Add.” 9 Choose to add an adapter, click on “Add” then on “Have Disk.” 10 Insert ...

  • HP (Hewlett-Packard) 3C509B-TP - page 15

    3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. D r i v e r N a m e : E l n k 3 . S Y S S i z e : 2 ...

  • HP (Hewlett-Packard) 3C509B-TP - page 16

    3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 7 After windows loads, open the “NETWORK” Program Group, and double- click on “Network Setup.” 8 Select the “Networks” button in the “Network Setup” dialog box. 9 Click on the “Install Microsoft Windows Network:” option, and click “OK.” 10 Click on the ...

  • HP (Hewlett-Packard) 3C509B-TP - page 17

    3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 ...

  • HP (Hewlett-Packard) 3C509B-TP - page 18

    3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 ...

  • HP (Hewlett-Packard) 3C509B-TP - page 19

    3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • 3COM Etherlink 3C509-B Ethernet card and drivers disk ver 5.0. • Vectra VL8 and VE7/VE8 Driver Name: W95EL5X9.INF Size: 16KB Date: 6/11/97 • Vectra VL7 Driver Name: Elnk.Vxd Size: 30.2KB Date: 7/18/96 • Windows 95 media. ...

  • HP (Hewlett-Packard) 3C509B-TP - page 20

    3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 under the heading “Device Configuration.” 6 If changes are required, save those changes and exit. 7 Remove the 3Com Software driver diskette and reboot the machine. 8 Click on “Start” and point to “Settings”, then select the “Control Panel.” 9 In the Control Panel group, double ...

  • HP (Hewlett-Packard) 3C509B-TP - page 21

    3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 an HP preloaded HDD, set the path to “C:MASTERSWIN95SYSTEMCABS”) 21 To complete the installation, select “Yes” to restart your computer. ...

  • HP (Hewlett-Packard) 3C509B-TP - page 22

    3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 ...

  • HP (Hewlett-Packard) 3C509B-TP - page 23

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. D r i v e r N a m e : E l n k 3 . S Y S S i z e : 2 7 K B D a t e : 7 / 1 8 / 9 6 • Mi ...

  • HP (Hewlett-Packard) 3C509B-TP - page 24

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 If you are using a Vectra VE7/VE8, follow the instructions below to complete the installation. a If changes are required, save those changes and exit. b Remove the 3COM software driver diskette and reboot the machine. c After Windows loads, open the "Main" progra ...

  • HP (Hewlett-Packard) 3C509B-TP - page 25

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 q At the "TCP/IP Configuration" screen, choose to use DHCP or enter your TCP information and click on "OK." (If you do not have the required information, contact your network administrator.) r At the "Domain/Workgroup Settings" dialog box, cli ...

  • HP (Hewlett-Packard) 3C509B-TP - page 26

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 19 Choose to install all applicable TCP/IP options and select “Continue.” (If you do not have the required information, contact your network administrator) 20 At the “Network Settings” dialog box, click on “OK.” 21 Accept the default “NWLink IPX/SPX Protocol ...

  • HP (Hewlett-Packard) 3C509B-TP - page 27

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 Windows NT Workstation 4.0 Requirements • HP Vectra with Windows NT Workstation 4.0 Service Pack 3. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver 5.0. Driver Name: Elnk3.SYS Size: 27KB Date: 7/18/96 • Microsoft Windows NT Workstation 4.0 and service pack media. ...

  • HP (Hewlett-Packard) 3C509B-TP - page 28

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 6 If changes are required, save those changes and exit. 7 Remove the 3com cards driver diskette and reboot the machine. 8 Power on the machine and allow it to boot to Windows NT Workstation 4.0. 9 Log onto the machine with administrator privileges. (If you do not have the required ...

  • HP (Hewlett-Packard) 3C509B-TP - page 29

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 25 When “Windows NT is now ready to start the network…” click on “Next.” 26 Specify your Computer Name, Workgroup or Domain and click on “Next.” (If you do not have the required information, contact your network administrator) 27 After “Network has been installed on ...

  • HP (Hewlett-Packard) 3C509B-TP - page 30

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 ...

  • HP (Hewlett-Packard) 3C509B-TP - page 31

    4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11 4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0. D r i v e r N a m e : E l n k 3 . S Y S S i z e : 2 ...

  • HP (Hewlett-Packard) 3C509B-TP - page 32

    4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11 7 After windows loads, open the “NETWORK” Program Group, and double- click on “Network Setup.” 8 Select the “Networks” button in the “Network Setup” dialog box. 9 Click on the “Install Microsoft Windows Network:” option, and click “OK.” 10 Click on the ...

  • HP (Hewlett-Packard) 3C509B-TP - page 33

    4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • 3COM Etherlink 3C509-B Ethernet card and drivers disk ver 5.0. Vectra VL8 and VE7/VE8 Driver Name: W95EL5X9.INF Size:16KB Date: 6/11/97. • Vectra VL7 Driver Name: Elnk3.vxd Size: 30.2KB Date: 7/18/96. • DOS and MS-Windows fo ...

  • HP (Hewlett-Packard) 3C509B-TP - page 34

    4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 6 If changes are required, save those changes and exit. 7 Remove the 3Com Software driver diskette and reboot the machine. 8 Click on “Start” and point to “Settings”, then select the “Control Panel.” 9 In the Control Panel group, double click on the “Network” icon . 10 In the ? ...

  • HP (Hewlett-Packard) 3C509B-TP - page 35

    4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 “C:MASTERSWIN95SYSTEMCABS”) 22 To complete the installation, select “Yes” to restart your computer. ...

  • HP (Hewlett-Packard) 3C509B-TP - page 36

    4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 ...

  • HP (Hewlett-Packard) 3C509B-TP - page 37

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0.Driver N a m e : E l n k 3 . S Y S S i z e : 2 7 K B D a t e : 7 / 1 8 / 9 6 • Microsoft ...

  • HP (Hewlett-Packard) 3C509B-TP - page 38

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 7 Remove the 3com software driver diskette and reboot the machine. 8 After windows loads, open the “Main” program group, double-click on “Control Panel” icon. 9 Double click on the “Network” icon and agree to install Windows NT Networking on your computer. 10 In ...

  • HP (Hewlett-Packard) 3C509B-TP - page 39

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 administrator) 23 At the “Domain/Workgroup Settings” Dialog Box, click on “OK” to accept the default “Workgroup” as your workgroup name. (If you do not have the required information, contact your network administrator) 24 To complete the installation, remove the ...

  • HP (Hewlett-Packard) 3C509B-TP - page 40

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 ...

  • HP (Hewlett-Packard) 3C509B-TP - page 41

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 Windows NT Workstation 4.0 Requirements • HP Vectra with Windows NT Workstation 4.0 Service Pack 3. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver 5.0. Driver Name: Elnk3.SYS Size: 27KB Date: 7/18/96 • Microsoft Windows NT Workstation 4.0 and service pack media. ( ...

  • HP (Hewlett-Packard) 3C509B-TP - page 42

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 6 If changes are required, save those changes and exit. 7 Remove the 3com cards driver diskette and reboot the machine. 8 Power on the machine and allow it to boot to Windows NT Workstation 4.0. 9 Log onto the machine with administrator privileges. (If you do not have the required i ...

  • HP (Hewlett-Packard) 3C509B-TP - page 43

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 25 When “Windows NT is now ready to start the network…” click on “Next.” 26 Specify your Computer Name, Workgroup or Domain and click on “Next.” (If you do not have the required information, contact your network administrator) 27 After “Network has been installed on ...

  • HP (Hewlett-Packard) 3C509B-TP - page 44

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 ...

  • HP (Hewlett-Packard) 3C509B-TP - page 45

    ...

  • HP (Hewlett-Packard) 3C509B-TP - page 46

    V ersion Number 3Com 3c509 Rev .1 ...

Fabricante HP (Hewlett-Packard) Categoría Network Card

Los documentos del dispositivo HP (Hewlett-Packard) 3C509B-TP que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos HP (Hewlett-Packard)
- manuales de instrucciones 3C509B-TP
- hojas de producto HP (Hewlett-Packard)
- folletos informativos
- o etiquetas energéticas HP (Hewlett-Packard) 3C509B-TP
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones HP (Hewlett-Packard) 3C509B-TP.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje HP (Hewlett-Packard) 3C509B-TP, instrucciones de servicio, instrucciones cortas o instrucciones de usuario HP (Hewlett-Packard) 3C509B-TP. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto HP (Hewlett-Packard) 3C509B-TP.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo HP (Hewlett-Packard) 3C509B-TP, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar HP (Hewlett-Packard) 3C509B-TP. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de HP (Hewlett-Packard) 3C509B-TP.

El manual de instrucciones completo de HP (Hewlett-Packard) debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual HP (Hewlett-Packard) 3C509B-TP - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice HP (Hewlett-Packard) 3C509B-TP, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de HP (Hewlett-Packard) 3C509B-TP que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo HP (Hewlett-Packard) 3C509B-TP - que deben facilitarnos los primeros pasos durante el uso de HP (Hewlett-Packard) 3C509B-TP
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con HP (Hewlett-Packard) 3C509B-TP
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de HP (Hewlett-Packard) 3C509B-TP en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de HP (Hewlett-Packard) 3C509B-TP?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con HP (Hewlett-Packard) 3C509B-TP, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con HP (Hewlett-Packard) 3C509B-TP probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)