-
Canon DR-6080 - page 1
SC ANNING B ASICS USEFUL FEA TURES TROUBLESHOO TING QUICK REFERENCE DOCUMENT SCANNER ...
-
Canon DR-6080 - page 2
PRECAUTIONS 1 ● Make sure that your documents are within the acceptable scanning sizes. Width: 2.2 – 12 inches (55 – 305 mm) Length: 2.8 – 17 inches (70 – 432 mm) Documents up to 39.4 inches (1000 mm) can be scanned in the extra long mode. Thickness: 0.06 – 0.15 mm (auto feed), 0.05 – 0.3 mm (manual feed) Weight: 16 – 32 lb. bond (6 ...
-
Canon DR-6080 - page 3
SCANNING BASICS GETTING ST ARTED This section explains the basic steps involved in scanning a document. It assumes that the batch to be scanned contains papers all of the same size and thickness. When using either the DR-6080 or the DR-9080C, you should always make sure that the scanner has been turned ON before turning on the computer connected to ...
-
Canon DR-6080 - page 4
3 SCANNING BASICS STEP 2 ▲ 1 ■ Long Documents If the document you are scanning is long, open the document eject tray extension . Next, lift up the stopper and adjust its position to match the length of the document. ■ Short Documents If the document you are scanning is short, use the stopper without opening the document eject tray extension. ...
-
Canon DR-6080 - page 5
STEP 3 The DR-6080 and the DR-9080C are operated via the bundled ISIS/TWAIN driver, which is compatible with a wide range of application software. Use the ISIS/TWAIN driver to select the feeding option that matches your need. 4 ▲ In addition to selecting the feeding option, use the ISIS/TWAIN driver to make any other scan settings you require. SC ...
-
Canon DR-6080 - page 6
5 STEP 4 Prepare your documents by aligning the batch so that its edges are even. Then place the batch on the document tray with the documents face up. The top edge of the batch should be placed against the back of the document tray. ▲ STEP 5 Adjust the document guides to the width of the documents. Panel mode: To scan more documents, reload the ...
-
Canon DR-6080 - page 7
6 SCANNING BASICS 1 STEP 4 Place the first page of the batch face up in the document tray. Adjust the document guides to the width of the page. ▲ STEP 5 Use your application software to instruct scanning to start. To scan more documents, simply reload the document tray. Scanning will continue automatically. To end scanning, press the Stop key. ? ...
-
Canon DR-6080 - page 8
7 1 STEP 4 Place one page face up on the document tray. Adjust the document guides to the width of the page. STEP 5 Select Manual Feeding in Feeding Option on the ISIS/TWAIN driver’s settings screen. Alternatively, press the Bypass Mode key on the operation panel. The document tray will rise. STEP 6 Use your application software to instruct scann ...
-
Canon DR-6080 - page 9
COUNT ONL Y MODE In this mode, documents are fed through the scanner and counted, not scanned. To use this mode, press the Count Only key on the operation panel. Then place a batch on the document tray and press the Start key. The number of pages in the batch will appear in the counter display. 8 ▲ PA TCH CODE SHEETS The scanner can recognize she ...
-
Canon DR-6080 - page 10
9 USER PREFERENCES To promote ease of use, the bundled ISIS/TWAIN driver offers registration of up to 100 sets of customized scan settings. After registration, you can prepare the scanner for a job by simply selecting a desire setting from a pull-down menu. ▲ PRESC AN Prescan allows you to scan the first page of your batch, adjust the brightness ...
-
Canon DR-6080 - page 11
10 2 SKIP BLANK P A GE Useful for scanning batches that include single- and double-sided documents, this feature automatically removes blank pages from the image file. ▲ AU T OMA TIC P A GE SIZE DETECTION This function automatically detects the size/thickness of documents and adjusts the scanner. It enables you to feed a batch that contains mixed ...
-
Canon DR-6080 - page 12
11 3 STEP 1 Remove documents from the scanner’s upper and lower trays, and remove any extra parts attached to the upper tray. Close the document eject tray extension if it is open. Paper may have jammed if scanning stops midway or “PXX” appears on the counter display. Follow the procedure below to remove jammed paper from inside the scanner. ...
-
Canon DR-6080 - page 13
12 3 STEP 1 Remove documents from the scanner’s upper and lower trays, and remove any extra parts attached to the upper tray. Close the document eject tray extension if it is open. If a document is jammed in the scanner’s paper exit section, the upper scanner only needs to be lifted up slightly for you to remove the document. ▲ STEP 2 Press t ...
-
Canon DR-6080 - page 14
13 3 ERROR CODES TROUBLESHOOTING Error codes appear on the operation panel’s counter display when a scanner malfunction occurs. Error Code Cause and Solution The document does not feed correctly. Press the Stop key to reset the counter. Place the document back on the document tray and scan the document again. A01 C01 C04 C06 The upper scanner is ...
-
Canon DR-6080 - page 15
14 3 A complete list of error codes and solutions to other types of scanner trouble can be found in Chapter 6 of the Instructions manual (“Troubleshooting”). TROUBLESHOOTING Error Code Cause and Solution Double feed detected by document length and ultrasonic. Check the document against the scanned image, and scan the document again. d06 Exx J01 ...
-
Canon DR-6080 - page 16
CANON Customer Service Centers © CANON ELECTRONICS INC. 2003 PRINTED IN JAPAN PUB.CE-CE-305 0104AB0.2 *CE-CE-305* ...
¿Tienes una pregunta acerca de Canon DR-6080?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Canon DR-6080, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Canon DR-6080 probablemente compartirá una forma de solucionarlo.