-
Magnadyne RV4000 - page 1
Operation and Installation Manual ® RV4000 AM / FM Stereo Multi-Media Receiver EQ 1 AS/PS 2 SLP 3 ALM 4 DISP 5 DIM 6 PUSH 3-Beam Laser Pickup A B AUX AM/FM DISC SPEAKER SPK FM ST RESET AUX HEADPHONES ® ...
-
Magnadyne RV4000 - page 2
Please take the time to read all of the information in this manual. Familiarity with operation and installation procedures will help you obtain the best possible performance from your new AM/FM Stereo Multi-Media Receiver. WARNING! To prevent fire or electrical shock hazard, do not expose this product to moisture, or remove cover or bottom screws. ...
-
Magnadyne RV4000 - page 3
Button Locations and Functions 3 1. Power On/Off: Press to turn the unit on or off. 2. Disc Door: To play a disc, insert the disc with label facing forward. 3. Disc Door Release: Press to open the door so the disc can be inserted. 4. Auxiliary Button (AUX): Press to choose auxiliary audio in mode. 5. Display Area: This area displays all function in ...
-
Magnadyne RV4000 - page 4
4 Button Locations and Functions (Continued) 16 . Dimmer Button (DIM): Press to dim the lighting in the display area. Sequential presses will select dif- ferent levels of display area lighting. 17. Radio Preset Button (6): Recalls a memorized radio station, and programs a radio station into memory. 18. Display Button (DISP): Press to toggle through ...
-
Magnadyne RV4000 - page 5
5 General Operations Selecting a Play Source: To select a play source, press one of the follow- ing mode buttons: AUX (Auxiliary Audio Input), AM/FM (AM or FM Radio Band) or DISC (Music) Dimming the Display: Press the DIM button to select the desired level of brightness for the display area. Display Selection: Press the DISP button to display the c ...
-
Magnadyne RV4000 - page 6
6 Sound Controls Bass: Select the Bass mode by pressing the VOLUME knob. Increase the Bass by rotating the VOLUME knob clockwise. Decrease the Bass by rotating the knob counterclockwise. After 6 seconds control reverts back to volume control. Bass, Treble and Balance Control Select the desired sound mode by pressing the VOLUME knob. The modes will ...
-
Magnadyne RV4000 - page 7
7 Sound Controls (Continued) Mute: Press the button to mute the volume level. Press the button again to restore the volume. Speaker Selection Selecting Speaker Sets: • Press the A button to toggle speaker set A on and off. “SPK A” appears in the display when speaker set A is on. • Press the B button to toggle speaker set B on and off. “SP ...
-
Magnadyne RV4000 - page 8
8 Sleep Timer Operation Setting the Sleep Timer: 1. Press the SLP button until the “SLP 10” appears in the display. 2. Keep pressing the SLP button again until the desired sleep time appears in the display (00, 10, 20, 30, 40, 50, 60, 70, 80 minutes). 3. Wait 5 seconds and the display will return to normal operation and “SLP” will appear in ...
-
Magnadyne RV4000 - page 9
9 Alarm Operation Setting the Alarm Timer: 1. Press the ALM button and the clock will appear in the display with the hour number flashing. 2. Rotate the VOLUME knob until the correct Hour appears in the display. “ALM” will appear in the display indicating the alarm is activated. Note 1: When setting the alarm clock make sure to select the corre ...
-
Magnadyne RV4000 - page 10
10 Radio Operations Selecting the Play Source: Press the AM/FM button and “rAdIO” appears in the display. After a brief moment either AM or FM will appear in the display. Selecting the AM or FM: Press the AM/FM button repeatedly and select from FM 1, FM 2, FM 3, AM 1 or AM 2. Seek Tuning in a Radio Station: Press and release the l button ...
-
Magnadyne RV4000 - page 11
11 Disc Warnings DVD 12cm disc (Single-sided disc only) CD 12cm disc MP3 12cm disc Label side up Do not touch the underside of the disc Do not bend Wipe the disc from the center toward the outside edge Rough spots on outside edge Rough spots on inside edge Ball point pen or pencil Handling and Cleaning: • Dirt, dust, scratches and warping disc wi ...
-
Magnadyne RV4000 - page 12
12 Music Disc Operation General Operations: 1. Push the door access the disc player. 2. Insert the disc onto the hub with the label facing forward. Use your thumb to make sure the disc snaps onto the hub. 3. Press the DISC button and “LOAd” will appear in the display. The disc will auto- matically start playing. Music Track Selection: Press the ...
-
Magnadyne RV4000 - page 13
13 Music Disc Operation (Continued) Removing the Disc: 1. Push the door to access the disc player. Wait until the disc stops spinning before opening up the door. 2. Use your finger to remove the disc from the hub. 3. Close the door. Pausing the Disc: Press the ll button to pause the disc, press it again to resume play. EQ 1 AS/PS 2 SLP 3 ALM 4 ...
-
Magnadyne RV4000 - page 14
14 MP3 Disc Operation General Operations: 1. Push the door access the disc player. 2. Insert the disc onto the hub with the label facing forward. Use your thumb to make sure the disc snaps onto the hub. 3. Press the DISC button and “LOAd” will appear in the display. The disc will auto- matically start playing. Disc File Selection: Press the l ? ...
-
Magnadyne RV4000 - page 15
15 MP3 Disc Operation (Continued) Removing the Disc: 1. Push the door to access the disc player. Wait until the disc stops spinning before opening up the door. 2. Use your finger to remove the disc from the hub. 3. Close the door. Pausing the Disc: Press the ll button to pause the disc, press it again to resume play. EQ 1 AS/PS 2 SLP 3 ALM 4 DI ...
-
Magnadyne RV4000 - page 16
16 Audio Input Selecting the Audio Input Source: Note 1: The RV4000 does not control the device, it just allows the audio to be played through the system. Note 2: If the rear audio input is being used once you plug a device into the front audio input jack the audio will be diverted to playing the front device. If the front audio jack is being used ...
-
Magnadyne RV4000 - page 17
17 The LCD display may fail to function normally due to the vehicle’s battery condition, and could require resetting the radio microprocessor if: • The vehicle has been “jump started” from a dead battery condition. • The vehicle battery becomes very low and is quick-charged. • The vehicle battery is removed and replaced. Should any of t ...
-
Magnadyne RV4000 - page 18
18 Installation 9 4 5 / 8 ” 6 1 / 4 ” Chassis Opening Structural Stud Wall Panel Caution: Do not install radio without rear cover installed: No user -ser viceable parts inside. Rear cover provides protection against potential fire hazard. 9 3 / 4 ” Trim Ring 3 / 8 ” ...
-
Magnadyne RV4000 - page 19
19 Speaker Connections _ + Gray Wire White/Black Wire (Common -) _ + Gray/Black Wire Right Speaker B Left Speaker B _ + Brown/Black Wire White Wire (Common -) _ + Brown Wire Right Speaker A Left Speaker A ...
-
Magnadyne RV4000 - page 20
20 Wiring and Auxiliary Connections Red Wire (+) to 12 Volt DC Power Black Wire Ground Music Disc Player (Optional) Audio In Audio Out 10A Fuse External Automotive Ty pe Antenna (Optional) In-Dash Unit (Optional) ...
-
Magnadyne RV4000 - page 21
21 Outdoor Antenna Grounding: If an outside antenna is connected to the receiver, be sure the antenna system is grounded, so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electrical Code, ANSI/NFPS No. 70-1983, provides information with respect to proper grounding of the mast and suppo ...
-
Magnadyne RV4000 - page 22
22 Warranty ONE (1) YEAR LIMITED WARRANTY Magnadyne Corporation or its authorized agents will within one year from the date of sale to you, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized agents, if said product or part is found defective in materials ...
-
Magnadyne RV4000 - page 23
23 ...
-
Magnadyne RV4000 - page 24
© Copyright 2011 Magnadyne Corporation RV4000-UM Rev. A 5-19-11 ...
¿Tienes una pregunta acerca de Magnadyne RV4000?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Magnadyne RV4000, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Magnadyne RV4000 probablemente compartirá una forma de solucionarlo.