Magnadyne RV4000の取扱説明書

24ページ 0.57 mb
ダウンロード

ページに移動 of 24

Summary
  • Magnadyne RV4000 - page 1

    Operation and Installation Manual ® RV4000 AM / FM Stereo Multi-Media Receiver EQ 1 AS/PS 2 SLP 3 ALM 4 DISP 5 DIM 6 PUSH 3-Beam Laser Pickup A B AUX AM/FM DISC SPEAKER SPK FM ST RESET AUX HEADPHONES ® ...

  • Magnadyne RV4000 - page 2

    Please take the time to read all of the information in this manual. Familiarity with operation and installation procedures will help you obtain the best possible performance from your new AM/FM Stereo Multi-Media Receiver. WARNING! To prevent fire or electrical shock hazard, do not expose this product to moisture, or remove cover or bottom screws. ...

  • Magnadyne RV4000 - page 3

    Button Locations and Functions 3 1. Power On/Off: Press to turn the unit on or off. 2. Disc Door: To play a disc, insert the disc with label facing forward. 3. Disc Door Release: Press to open the door so the disc can be inserted. 4. Auxiliary Button (AUX): Press to choose auxiliary audio in mode. 5. Display Area: This area displays all function in ...

  • Magnadyne RV4000 - page 4

    4 Button Locations and Functions (Continued) 16 . Dimmer Button (DIM): Press to dim the lighting in the display area. Sequential presses will select dif- ferent levels of display area lighting. 17. Radio Preset Button (6): Recalls a memorized radio station, and programs a radio station into memory. 18. Display Button (DISP): Press to toggle through ...

  • Magnadyne RV4000 - page 5

    5 General Operations Selecting a Play Source: To select a play source, press one of the follow- ing mode buttons: AUX (Auxiliary Audio Input), AM/FM (AM or FM Radio Band) or DISC (Music) Dimming the Display: Press the DIM button to select the desired level of brightness for the display area. Display Selection: Press the DISP button to display the c ...

  • Magnadyne RV4000 - page 6

    6 Sound Controls Bass: Select the Bass mode by pressing the VOLUME knob. Increase the Bass by rotating the VOLUME knob clockwise. Decrease the Bass by rotating the knob counterclockwise. After 6 seconds control reverts back to volume control. Bass, Treble and Balance Control Select the desired sound mode by pressing the VOLUME knob. The modes will ...

  • Magnadyne RV4000 - page 7

    7 Sound Controls (Continued) Mute: Press the button to mute the volume level. Press the button again to restore the volume. Speaker Selection Selecting Speaker Sets: • Press the A button to toggle speaker set A on and off. “SPK A” appears in the display when speaker set A is on. • Press the B button to toggle speaker set B on and off. “SP ...

  • Magnadyne RV4000 - page 8

    8 Sleep Timer Operation Setting the Sleep Timer: 1. Press the SLP button until the “SLP 10” appears in the display. 2. Keep pressing the SLP button again until the desired sleep time appears in the display (00, 10, 20, 30, 40, 50, 60, 70, 80 minutes). 3. Wait 5 seconds and the display will return to normal operation and “SLP” will appear in ...

  • Magnadyne RV4000 - page 9

    9 Alarm Operation Setting the Alarm Timer: 1. Press the ALM button and the clock will appear in the display with the hour number flashing. 2. Rotate the VOLUME knob until the correct Hour appears in the display. “ALM” will appear in the display indicating the alarm is activated. Note 1: When setting the alarm clock make sure to select the corre ...

  • Magnadyne RV4000 - page 10

    10 Radio Operations Selecting the Play Source: Press the AM/FM button and “rAdIO” appears in the display. After a brief moment either AM or FM will appear in the display. Selecting the AM or FM: Press the AM/FM button repeatedly and select from FM 1, FM 2, FM 3, AM 1 or AM 2. Seek Tuning in a Radio Station: Press and release the l  button ...

  • Magnadyne RV4000 - page 11

    11 Disc Warnings DVD 12cm disc (Single-sided disc only) CD 12cm disc MP3 12cm disc Label side up Do not touch the underside of the disc Do not bend Wipe the disc from the center toward the outside edge Rough spots on outside edge Rough spots on inside edge Ball point pen or pencil Handling and Cleaning: • Dirt, dust, scratches and warping disc wi ...

  • Magnadyne RV4000 - page 12

    12 Music Disc Operation General Operations: 1. Push the door access the disc player. 2. Insert the disc onto the hub with the label facing forward. Use your thumb to make sure the disc snaps onto the hub. 3. Press the DISC button and “LOAd” will appear in the display. The disc will auto- matically start playing. Music Track Selection: Press the ...

  • Magnadyne RV4000 - page 13

    13 Music Disc Operation (Continued) Removing the Disc: 1. Push the door to access the disc player. Wait until the disc stops spinning before opening up the door. 2. Use your finger to remove the disc from the hub. 3. Close the door. Pausing the Disc: Press the  ll button to pause the disc, press it again to resume play. EQ 1 AS/PS 2 SLP 3 ALM 4 ...

  • Magnadyne RV4000 - page 14

    14 MP3 Disc Operation General Operations: 1. Push the door access the disc player. 2. Insert the disc onto the hub with the label facing forward. Use your thumb to make sure the disc snaps onto the hub. 3. Press the DISC button and “LOAd” will appear in the display. The disc will auto- matically start playing. Disc File Selection: Press the l ? ...

  • Magnadyne RV4000 - page 15

    15 MP3 Disc Operation (Continued) Removing the Disc: 1. Push the door to access the disc player. Wait until the disc stops spinning before opening up the door. 2. Use your finger to remove the disc from the hub. 3. Close the door. Pausing the Disc: Press the  ll button to pause the disc, press it again to resume play. EQ 1 AS/PS 2 SLP 3 ALM 4 DI ...

  • Magnadyne RV4000 - page 16

    16 Audio Input Selecting the Audio Input Source: Note 1: The RV4000 does not control the device, it just allows the audio to be played through the system. Note 2: If the rear audio input is being used once you plug a device into the front audio input jack the audio will be diverted to playing the front device. If the front audio jack is being used ...

  • Magnadyne RV4000 - page 17

    17 The LCD display may fail to function normally due to the vehicle’s battery condition, and could require resetting the radio microprocessor if: • The vehicle has been “jump started” from a dead battery condition. • The vehicle battery becomes very low and is quick-charged. • The vehicle battery is removed and replaced. Should any of t ...

  • Magnadyne RV4000 - page 18

    18 Installation 9 4 5 / 8 ” 6 1 / 4 ” Chassis Opening Structural Stud Wall Panel Caution: Do not install radio without rear cover installed: No user -ser viceable parts inside. Rear cover provides protection against potential fire hazard. 9 3 / 4 ” Trim Ring 3 / 8 ” ...

  • Magnadyne RV4000 - page 19

    19 Speaker Connections _ + Gray Wire White/Black Wire (Common -) _ + Gray/Black Wire Right Speaker B Left Speaker B _ + Brown/Black Wire White Wire (Common -) _ + Brown Wire Right Speaker A Left Speaker A ...

  • Magnadyne RV4000 - page 20

    20 Wiring and Auxiliary Connections Red Wire (+) to 12 Volt DC Power Black Wire Ground Music Disc Player (Optional) Audio In Audio Out 10A Fuse External Automotive Ty pe Antenna (Optional) In-Dash Unit (Optional) ...

  • Magnadyne RV4000 - page 21

    21 Outdoor Antenna Grounding: If an outside antenna is connected to the receiver, be sure the antenna system is grounded, so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electrical Code, ANSI/NFPS No. 70-1983, provides information with respect to proper grounding of the mast and suppo ...

  • Magnadyne RV4000 - page 22

    22 Warranty ONE (1) YEAR LIMITED WARRANTY Magnadyne Corporation or its authorized agents will within one year from the date of sale to you, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized agents, if said product or part is found defective in materials ...

  • Magnadyne RV4000 - page 23

    23 ...

  • Magnadyne RV4000 - page 24

    © Copyright 2011 Magnadyne Corporation RV4000-UM Rev. A 5-19-11 ...

メーカー Magnadyne カテゴリー Stereo Receiver

Magnadyne RV4000のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- RV4000の取扱説明書
- Magnadyneの製品カード
- パンフレット
- またはMagnadyne RV4000の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Magnadyne RV4000の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Magnadyne RV4000の取り付け説明書、サービスマニュアル、簡易説明書、またはMagnadyne RV4000のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Magnadyne RV4000の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Magnadyne RV4000デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがMagnadyne RV4000を使用するのを助ける技術的文書のことです。説明書は通常、全てのMagnadyne RV4000ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Magnadyneの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Magnadyne RV4000の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははMagnadyne RV4000の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Magnadyne RV4000に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Magnadyne RV4000デバイスの基本機能を使うにあたってのヒント。 Magnadyne RV4000のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Magnadyne RV4000に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるMagnadyne RV4000のメーカー/サービスへの連絡先に関する情報。

Magnadyne RV4000についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもMagnadyne RV4000の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがMagnadyne RV4000で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)