Manual de instrucciones GE JTP20

16 de páginas 0.77 mb
Descargar

Pasar a la página of 16

Summary
  • GE JTP20 - page 1

    1 30 ” Built-In W all Oven Installation Instructions JTP20, JTP25, JTP28, JTP48, JTP50, JT912, JT915, JT952, JT955, ZET938, ZET958 If you have questions, call 1.800.GE.CARES or visit our website at: ge.com Before Y ou Begin Read these instructions carefully and completely . • IMPORT ANT —Save these instructions for local inspector ’ s use. ...

  • GE JTP20 - page 2

    2 Electrical Requirements This appliance must be supplied with the proper voltage and frequency , and connected to an individual, properly grounded branch circuit, protected by a circuit breaker or fuse having amperage as noted on rating plate. (Rating plate is located on oven frame.) Rating Plate Location (behind oven door) IMPORT ANT SAFETY INSTR ...

  • GE JTP20 - page 3

    3 Open oven door and remove literature pack, broiler pan and grid, and oven racks. Remove Installation Instructions from literature pack and read them carefully before you begin. Be sure to place all literature, Owner ’s Manual, Installations, etc. in a safe place for future reference. Remove packaging materials. Check behind hinges and under fal ...

  • GE JTP20 - page 4

    4 Place the oven on a table or platform even with the cutout opening. (Platform must support 150 lbs. single, 275 lbs. double.) Installation Instructions Pre-Installation Checklist cont. Remove the bottom trim from the top of the oven. It will be installed at the end of the installation process. The trim is wrapped separately and taped to the top o ...

  • GE JTP20 - page 5

    5 Cabinet Width 30 ” Recommended Minimum Cutout Location from Floor 32 1/2 ” Cutout Depth 23 1/2 ” Min. Cutout Width 28 1/2 ” Min. 28 5/8 ” Max. Cutout Height 27 1/4 ” Min. 27 5/16 ” Max. If the cabinet does not have a solid bottom, two braces or runners must be installed level with the bottom of the cutout to support the weight of th ...

  • GE JTP20 - page 6

    6 Installation Instructions Cabinet Width 30 ” Recommended Minimum Cutout Location from Floor 12 ” Cutout Depth 23 1/2 ” Min. Cutout Width 28 1/2 ” Min. 28 5/8 ” Max. Cutout Height 51 13/16 ” Min. 51 15/16 ” Max. f the cabinet does not have a solid bottom, two braces or runners must be installed level with the bottom of the cutout to ...

  • GE JTP20 - page 7

    7 Installation Instructions Cutout for Single Built-In Oven Under Counter NOTE: This oven is not approved to be installed under a solid disk, induction or downdraft modular cooktop. A3 25" Gas or electric cooktops may be installed over this oven. See cooktop installation instructions for cutout size. See label on top of oven for approved cookt ...

  • GE JTP20 - page 8

    8 (Continued on following page) Installation Instructions Electrical Connections ATTENTION INST ALLER All electric wall ovens must be hard wired (direct wired) into an approved junction box. A plug and receptacle is NOT permitted on these products. DO NOT shorten the flexible conduit. The conduit strain relief clamp must be securely attached to the ...

  • GE JTP20 - page 9

    9 Installation Instructions Electrical Connections cont. B4 Three-Conductor Branch Circuit Connection When connecting to a three-conductor branch circuit, if local codes permit: a. Connect the bare oven ground conductor with the crimped neutral (white) lead to the branch circuit neutral (white or gray in color), using a wire nut. b . Connect the ov ...

  • GE JTP20 - page 10

    10 (Continued on following page) W ARNING: Mounting screws must be used. Failure to do so could result in the oven falling out of the cabinet causing serious injury . Installation Instructions Securing the Oven in the Opening Drilling the Pilot Holes and Mounting the Oven a. Drill through the mounting holes (top and bottom) of the side trim, for th ...

  • GE JTP20 - page 11

    11 a. With oven installed, take the bottom trim and center it on the bottom front edge of the cabinet opening. b. Using the trim as a template, mark the center of each slot (two total) where the mounting holes will be drilled. c. Remove the trim. d. Drill pilot holes into the center of each template mark. Installation Instructions Installing the Me ...

  • GE JTP20 - page 12

    12 Lift the oven door by placing one hand on each side. The door is heavy , so you may need help. Do not lift the door by the handle. With the door at the same angle as the removal position (half way between the closed and broil stop position, seat the notch of the hinge arm into the bottom edge of the hinge slot. The notch of the hinge arm must be ...

  • GE JTP20 - page 13

    13 Installation Instructions Remove all protective film, if present, and any stickers. Check to be sure that all wiring is secure and not pinched or in contact with moving parts. Pre-T est Checklist Check that the bottom trim is installed properly (see page 1 1). Check to be sure the mounting screws are installed and flush with the side trim (see p ...

  • GE JTP20 - page 14

    14 NOTES ...

  • GE JTP20 - page 15

    15 NOTES ...

  • GE JTP20 - page 16

    16 NOTES ...

Fabricante GE Categoría Oven

Los documentos del dispositivo GE JTP20 que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos GE
- manuales de instrucciones JTP20
- hojas de producto GE
- folletos informativos
- o etiquetas energéticas GE JTP20
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones GE JTP20.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje GE JTP20, instrucciones de servicio, instrucciones cortas o instrucciones de usuario GE JTP20. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto GE JTP20.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo GE JTP20, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar GE JTP20. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de GE JTP20.

El manual de instrucciones completo de GE debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual GE JTP20 - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice GE JTP20, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de GE JTP20 que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo GE JTP20 - que deben facilitarnos los primeros pasos durante el uso de GE JTP20
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con GE JTP20
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de GE JTP20 en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de GE JTP20?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con GE JTP20, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con GE JTP20 probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Comentarios (0)