Manuale per l’uso GE JTP20

16 pagine 0.77 mb
Scarica

Vai alla pagina of 16

Summary
  • GE JTP20 - page 1

    1 30 ” Built-In W all Oven Installation Instructions JTP20, JTP25, JTP28, JTP48, JTP50, JT912, JT915, JT952, JT955, ZET938, ZET958 If you have questions, call 1.800.GE.CARES or visit our website at: ge.com Before Y ou Begin Read these instructions carefully and completely . • IMPORT ANT —Save these instructions for local inspector ’ s use. ...

  • GE JTP20 - page 2

    2 Electrical Requirements This appliance must be supplied with the proper voltage and frequency , and connected to an individual, properly grounded branch circuit, protected by a circuit breaker or fuse having amperage as noted on rating plate. (Rating plate is located on oven frame.) Rating Plate Location (behind oven door) IMPORT ANT SAFETY INSTR ...

  • GE JTP20 - page 3

    3 Open oven door and remove literature pack, broiler pan and grid, and oven racks. Remove Installation Instructions from literature pack and read them carefully before you begin. Be sure to place all literature, Owner ’s Manual, Installations, etc. in a safe place for future reference. Remove packaging materials. Check behind hinges and under fal ...

  • GE JTP20 - page 4

    4 Place the oven on a table or platform even with the cutout opening. (Platform must support 150 lbs. single, 275 lbs. double.) Installation Instructions Pre-Installation Checklist cont. Remove the bottom trim from the top of the oven. It will be installed at the end of the installation process. The trim is wrapped separately and taped to the top o ...

  • GE JTP20 - page 5

    5 Cabinet Width 30 ” Recommended Minimum Cutout Location from Floor 32 1/2 ” Cutout Depth 23 1/2 ” Min. Cutout Width 28 1/2 ” Min. 28 5/8 ” Max. Cutout Height 27 1/4 ” Min. 27 5/16 ” Max. If the cabinet does not have a solid bottom, two braces or runners must be installed level with the bottom of the cutout to support the weight of th ...

  • GE JTP20 - page 6

    6 Installation Instructions Cabinet Width 30 ” Recommended Minimum Cutout Location from Floor 12 ” Cutout Depth 23 1/2 ” Min. Cutout Width 28 1/2 ” Min. 28 5/8 ” Max. Cutout Height 51 13/16 ” Min. 51 15/16 ” Max. f the cabinet does not have a solid bottom, two braces or runners must be installed level with the bottom of the cutout to ...

  • GE JTP20 - page 7

    7 Installation Instructions Cutout for Single Built-In Oven Under Counter NOTE: This oven is not approved to be installed under a solid disk, induction or downdraft modular cooktop. A3 25" Gas or electric cooktops may be installed over this oven. See cooktop installation instructions for cutout size. See label on top of oven for approved cookt ...

  • GE JTP20 - page 8

    8 (Continued on following page) Installation Instructions Electrical Connections ATTENTION INST ALLER All electric wall ovens must be hard wired (direct wired) into an approved junction box. A plug and receptacle is NOT permitted on these products. DO NOT shorten the flexible conduit. The conduit strain relief clamp must be securely attached to the ...

  • GE JTP20 - page 9

    9 Installation Instructions Electrical Connections cont. B4 Three-Conductor Branch Circuit Connection When connecting to a three-conductor branch circuit, if local codes permit: a. Connect the bare oven ground conductor with the crimped neutral (white) lead to the branch circuit neutral (white or gray in color), using a wire nut. b . Connect the ov ...

  • GE JTP20 - page 10

    10 (Continued on following page) W ARNING: Mounting screws must be used. Failure to do so could result in the oven falling out of the cabinet causing serious injury . Installation Instructions Securing the Oven in the Opening Drilling the Pilot Holes and Mounting the Oven a. Drill through the mounting holes (top and bottom) of the side trim, for th ...

  • GE JTP20 - page 11

    11 a. With oven installed, take the bottom trim and center it on the bottom front edge of the cabinet opening. b. Using the trim as a template, mark the center of each slot (two total) where the mounting holes will be drilled. c. Remove the trim. d. Drill pilot holes into the center of each template mark. Installation Instructions Installing the Me ...

  • GE JTP20 - page 12

    12 Lift the oven door by placing one hand on each side. The door is heavy , so you may need help. Do not lift the door by the handle. With the door at the same angle as the removal position (half way between the closed and broil stop position, seat the notch of the hinge arm into the bottom edge of the hinge slot. The notch of the hinge arm must be ...

  • GE JTP20 - page 13

    13 Installation Instructions Remove all protective film, if present, and any stickers. Check to be sure that all wiring is secure and not pinched or in contact with moving parts. Pre-T est Checklist Check that the bottom trim is installed properly (see page 1 1). Check to be sure the mounting screws are installed and flush with the side trim (see p ...

  • GE JTP20 - page 14

    14 NOTES ...

  • GE JTP20 - page 15

    15 NOTES ...

  • GE JTP20 - page 16

    16 NOTES ...

Fabbricante GE Categoria Oven

I documenti che otteniamo dal fabbricante del dispositivoGE JTP20 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici GE
- manuali per l’uso JTP20
- schede prodotto GE
- opuscoli
- o etichette energetiche GE JTP20
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso GE JTP20.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione GE JTP20, manuali di manutenzione, brevi manuali o manuali utente GE JTP20. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto GE JTP20.

Manuali per l’uso simili

Manuale completo del dispositivo GE JTP20, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare GE JTP20 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti GE JTP20.

Il manuale per l’uso completo GE, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale GE JTP20 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice GE JTP20, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per GE JTP20 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo GE JTP20 - che ci dovrebbe aiutare nei primi passi durante l'uso GE JTP20
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del GE JTP20
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio GE JTP20 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su GE JTP20?

Utilizza il modulo sottostante

Se non hai risolto il problema con GE JTP20 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con GE JTP20 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)