-
Harbor Freight Tools 94855 - page 1
IMP A CT WRENCH 18 V OL T - CORDLESS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our W eb site at: http://www .harborfreight.com Cop yright © 2006 by Harbor F reight T ools ® . All rights reser v ed. No por tion of this manual or an y ar twor k contained herein ma y be reproduced in any shape or f orm without the e xpress written consent o ...
-
Harbor Freight Tools 94855 - page 2
PR ODUCT SPECIFICA TIONS Y ou will need this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and c leaning procedures, parts list and assembly diagram. K eep your in v oice with this manual. Write the in v oice number on the inside of the fr ont cover . K eep this manual and in v oice in a saf e and dry ...
-
Harbor Freight Tools 94855 - page 3
3. Keep b ystanders, children, and visitors a way while operating a po wer tool. Distractions can cause y ou to lose control. Protect others in the work area from debris such as chips and spar ks . Pro vide barr iers or shields as needed. ELECTRICAL SAFETY 4. Gr ounded tools must be plugged into an outlet pr operly installed and gr ounded in accord ...
-
Harbor Freight Tools 94855 - page 4
11. Dress properl y . Do not wear loose c lothing or je welr y . Contain long hair . Keep y our hair , c lothing, and gloves a way fr om mo ving par ts. Loose clothes , jew elr y , or long hair can be caught in moving par ts . 12. A v oid accidental starting. Be sure the P o wer Switch is off bef ore plugging in. Carr ying power tools with y our fi ...
-
Harbor Freight Tools 94855 - page 5
22. Check f or misalignment or binding of mo ving par ts, breakage of par ts, and any other condition that ma y affect the tool’ s operation. If damaged, ha ve the tool serviced before using. Man y accidents are caused by poorly maintained tools. 23. Use only accessories that are recommended b y the manufacturer for y our model. Accessories that ...
-
Harbor Freight Tools 94855 - page 6
Charger by pulling on the P ower Cord. K eep the P ower Cord a wa y from heated surf aces. 8. T o av oid electrical shoc k, do not handle the Char g er (48), its P o wer Cord Plug, or the Impact Wrench with wet hands. 9. Keep the Handle of the Impact Wrench dry , clean, free from oil and grease. 10. A v oid unintentional starting. Make sure y ou ar ...
-
Harbor Freight Tools 94855 - page 7
GROUNDING W ARNING! GROUNDED T OOLS: T OOLS WITH THREE PRONG PLUGS 1. T ools marked with “Grounding Required” ha ve a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool should electr ically malfunction or break down, g rounding provides a low resistance path to carr y electr ici ...
-
Harbor Freight Tools 94855 - page 8
FIGURE B SKU 94855 P A GE 8 DOUBLE INSULA TED TOOLS: T OOLS WITH TWO PRONG PLUGS 4. T ools marked “Double Insulated” do not require grounding. They ha v e a special double insulation system which satisfies OSHA requirements and complies with the applicable standards of Underwriters Laboratories, Inc., the Canadian Standard Association, and the ...
-
Harbor Freight Tools 94855 - page 9
6. If you are using an e xtension cord outdoors , make sure it is marked with the suffix “W -A” (“W” in Canada) to indicate it is acceptab le f or outdoor use. 7. Make sure y our e xtension cord is proper ly wired and in good electr ical condition. Alwa ys replace a damaged e xtension cord or ha ve it repaired b y a qualified electrician be ...
-
Harbor Freight Tools 94855 - page 10
UNP A CKING When unpacking, chec k to mak e sure all the par ts shown on the P ar ts List on pa g e 14 are included. If any par ts are missing or broken, please call Harbor F reight T ools at the number sho wn on the cov er of this manual as soon as possib le. PR ODUCT FEA TURES NO TE: F or additional inf or mation regarding the par ts listed in th ...
-
Harbor Freight Tools 94855 - page 11
SKU 94855 P A GE 11 3. Forwar d/Re ver se Button: The Forw ard/Re v erse Button allows y ou to change the rotational direction of the Impact Wrench. For a cloc kwise rotation, mov e the F orward/Re v erse Button to the right . For a countercloc kwise rotation, mov e the F orward/Re v erse Button to the left . T o av oid damage to the Impact Wrench, ...
-
Harbor Freight Tools 94855 - page 12
1. Bef ore installing the Sock et (49), make sure the Battery (30) is remov ed from the Impact Wrench to a void accidental star ting. Then, fir mly inser t and lock in place the Sock et onto the 1/2” Impact Head of the tool. 2. Whene ver possib le, secure the w or k piece in place, using a vise or clamps (not included). 3. Inser t the fully charg ...
-
Harbor Freight Tools 94855 - page 13
INSPECTION, MAINTENANCE, AND CLEANING 1. W ARNING! Alwa ys turn the T rigger Switch (21) to its “OFF” position, and unplug the Charger (48) fr om its electrical outlet before perf orming any inspection, maintenance, or c leaning. 2. BEFORE EA CH USE, inspect the gener al condition of the Impact Wrench. Check f or misalignment or binding of mo v ...
-
Harbor Freight Tools 94855 - page 14
P AR TS LIST SKU 94855 P AGE 14 50 Charger Base 1 (not included) REV 12/06 ...
-
Harbor Freight Tools 94855 - page 15
SKU 94855 P A GE 15 ASSEMBL Y DIA GRAM 13 23 19 32 34 18 20 94 24 25 2 6 27 38 12 39 26 21 42 43 35 47 40 3 46 41 36 30 37 27 29 8 1 44 45 31 14 16 17 7 33 11 5 28 49: 1/2” SOCKET (not inc luded) NO TE: Some par ts are listed and shown f or illustration pur poses only , and are not av ailab le individually as replacement par ts. 48 50 REV 12/06 ...
¿Tienes una pregunta acerca de Harbor Freight Tools 94855?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Harbor Freight Tools 94855, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Harbor Freight Tools 94855 probablemente compartirá una forma de solucionarlo.