-
Harbor Freight Tools 94855 - page 1
IMP A CT WRENCH 18 V OL T - CORDLESS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our W eb site at: http://www .harborfreight.com Cop yright © 2006 by Harbor F reight T ools ® . All rights reser v ed. No por tion of this manual or an y ar twor k contained herein ma y be reproduced in any shape or f orm without the e xpress written consent o ...
-
Harbor Freight Tools 94855 - page 2
PR ODUCT SPECIFICA TIONS Y ou will need this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and c leaning procedures, parts list and assembly diagram. K eep your in v oice with this manual. Write the in v oice number on the inside of the fr ont cover . K eep this manual and in v oice in a saf e and dry ...
-
Harbor Freight Tools 94855 - page 3
3. Keep b ystanders, children, and visitors a way while operating a po wer tool. Distractions can cause y ou to lose control. Protect others in the work area from debris such as chips and spar ks . Pro vide barr iers or shields as needed. ELECTRICAL SAFETY 4. Gr ounded tools must be plugged into an outlet pr operly installed and gr ounded in accord ...
-
Harbor Freight Tools 94855 - page 4
11. Dress properl y . Do not wear loose c lothing or je welr y . Contain long hair . Keep y our hair , c lothing, and gloves a way fr om mo ving par ts. Loose clothes , jew elr y , or long hair can be caught in moving par ts . 12. A v oid accidental starting. Be sure the P o wer Switch is off bef ore plugging in. Carr ying power tools with y our fi ...
-
Harbor Freight Tools 94855 - page 5
22. Check f or misalignment or binding of mo ving par ts, breakage of par ts, and any other condition that ma y affect the tool’ s operation. If damaged, ha ve the tool serviced before using. Man y accidents are caused by poorly maintained tools. 23. Use only accessories that are recommended b y the manufacturer for y our model. Accessories that ...
-
Harbor Freight Tools 94855 - page 6
Charger by pulling on the P ower Cord. K eep the P ower Cord a wa y from heated surf aces. 8. T o av oid electrical shoc k, do not handle the Char g er (48), its P o wer Cord Plug, or the Impact Wrench with wet hands. 9. Keep the Handle of the Impact Wrench dry , clean, free from oil and grease. 10. A v oid unintentional starting. Make sure y ou ar ...
-
Harbor Freight Tools 94855 - page 7
GROUNDING W ARNING! GROUNDED T OOLS: T OOLS WITH THREE PRONG PLUGS 1. T ools marked with “Grounding Required” ha ve a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool should electr ically malfunction or break down, g rounding provides a low resistance path to carr y electr ici ...
-
Harbor Freight Tools 94855 - page 8
FIGURE B SKU 94855 P A GE 8 DOUBLE INSULA TED TOOLS: T OOLS WITH TWO PRONG PLUGS 4. T ools marked “Double Insulated” do not require grounding. They ha v e a special double insulation system which satisfies OSHA requirements and complies with the applicable standards of Underwriters Laboratories, Inc., the Canadian Standard Association, and the ...
-
Harbor Freight Tools 94855 - page 9
6. If you are using an e xtension cord outdoors , make sure it is marked with the suffix “W -A” (“W” in Canada) to indicate it is acceptab le f or outdoor use. 7. Make sure y our e xtension cord is proper ly wired and in good electr ical condition. Alwa ys replace a damaged e xtension cord or ha ve it repaired b y a qualified electrician be ...
-
Harbor Freight Tools 94855 - page 10
UNP A CKING When unpacking, chec k to mak e sure all the par ts shown on the P ar ts List on pa g e 14 are included. If any par ts are missing or broken, please call Harbor F reight T ools at the number sho wn on the cov er of this manual as soon as possib le. PR ODUCT FEA TURES NO TE: F or additional inf or mation regarding the par ts listed in th ...
-
Harbor Freight Tools 94855 - page 11
SKU 94855 P A GE 11 3. Forwar d/Re ver se Button: The Forw ard/Re v erse Button allows y ou to change the rotational direction of the Impact Wrench. For a cloc kwise rotation, mov e the F orward/Re v erse Button to the right . For a countercloc kwise rotation, mov e the F orward/Re v erse Button to the left . T o av oid damage to the Impact Wrench, ...
-
Harbor Freight Tools 94855 - page 12
1. Bef ore installing the Sock et (49), make sure the Battery (30) is remov ed from the Impact Wrench to a void accidental star ting. Then, fir mly inser t and lock in place the Sock et onto the 1/2” Impact Head of the tool. 2. Whene ver possib le, secure the w or k piece in place, using a vise or clamps (not included). 3. Inser t the fully charg ...
-
Harbor Freight Tools 94855 - page 13
INSPECTION, MAINTENANCE, AND CLEANING 1. W ARNING! Alwa ys turn the T rigger Switch (21) to its “OFF” position, and unplug the Charger (48) fr om its electrical outlet before perf orming any inspection, maintenance, or c leaning. 2. BEFORE EA CH USE, inspect the gener al condition of the Impact Wrench. Check f or misalignment or binding of mo v ...
-
Harbor Freight Tools 94855 - page 14
P AR TS LIST SKU 94855 P AGE 14 50 Charger Base 1 (not included) REV 12/06 ...
-
Harbor Freight Tools 94855 - page 15
SKU 94855 P A GE 15 ASSEMBL Y DIA GRAM 13 23 19 32 34 18 20 94 24 25 2 6 27 38 12 39 26 21 42 43 35 47 40 3 46 41 36 30 37 27 29 8 1 44 45 31 14 16 17 7 33 11 5 28 49: 1/2” SOCKET (not inc luded) NO TE: Some par ts are listed and shown f or illustration pur poses only , and are not av ailab le individually as replacement par ts. 48 50 REV 12/06 ...
Harbor Freight Tools 94855についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもHarbor Freight Tools 94855の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHarbor Freight Tools 94855で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。