-
Harbor Freight Tools 92196 - page 1
12 V OL T RECHARGEABLE GREASE GUN Model 92196 OPERA TING INSTR UCTIONS 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at: http://www .harborfreight.com Copyright 2004 by Harbor F reight T ools ® . All r ights reserved. No por tion of this manual or any artwork contained herein may be reproduced in any shape or form without the e ...
-
Harbor Freight Tools 92196 - page 2
PR ODUCT SPECIFICA TIONS SA VE THIS MANU AL Y ou will need this manual f or the safety warnings and precautions, assemb ly , operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. K eep your in voice with this manual. Wr ite the inv oice number on the inside of the front cov er . K eep this manual and in voice ...
-
Harbor Freight Tools 92196 - page 3
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. 3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. ELECTRICAL SAFETY 1. A v oid body contact with g ...
-
Harbor Freight Tools 92196 - page 4
T OOL USE AND CARE 1. Do not fo rce the tool. Use the correct tool for y our application. The correct tool will do the job better and safer at the rate for which it is designed. 2. Do not use the power tool if the Switch (18) does not turn it on or off. Any tool that cannot be controlled with the Switch is dangerous and must be replaced. 3. Disconn ...
-
Harbor Freight Tools 92196 - page 5
obstructions, grease, oil, trash, and other debris. Do not use the Grease Gun in areas near flammable chemicals, dusts, and vapors. Do not use this product in a damp or wet location. 2. Maintain labels and nameplates on this product. These carr y impor tant inf or- mation. If unreadable or missing, contact Harbor F reight T ools for a replacement. ...
-
Harbor Freight Tools 92196 - page 6
13. W ARNING! P eople with pacemakers should consult their ph ysician(s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interf erence or f ailure of the pacemaker . In addition, people with pacemakers should adhere to the f ollowing: A v oid operating power tools alone. Don’t use a power tool ...
-
Harbor Freight Tools 92196 - page 7
5. Depress the “SET” b utton on the Charger (17). The Green Light will automati- cally go out, and the Red Light will turn on indicating the Charger has switched to the charge mode. (See Figure A.) 6. In appro ximately 1 hour, when the Battery P ack (3) is fully charged, the Red Light will automatically go out, and the Green Light will turn on. ...
-
Harbor Freight Tools 92196 - page 8
SKU 92196 For technical questions, please call 1-800-444-3353 P A GE 8 4. Remov e the pull tab from the grease car tridge. Then, screw the Grease T ube (2) into the Pump Housing ( 6). (See Figure B.) 5. T ur n the Follo wer Handle (19) to release the F ollower Rod (22) from the slot on the end cap of the Grease T ube (2) to allo w the F ollower Rod ...
-
Harbor Freight Tools 92196 - page 9
SKU 92196 For technical questions, please call 1-800-444-3353 P A GE 9 T O FILL THE GREASE GUN, USING A FILLER PUMP 1. Pull back on the Follower Handle (19) until the Follower Rod (22) is fully ex- tended. Then, tur n the Follo wer Handle (19) and latch the F ollower Rod into the slot on the end cap of the Grease T ube (2). (See Figure B.) 2. Attac ...
-
Harbor Freight Tools 92196 - page 10
1. Release the F ollower Rod (22) from the slot on the end cap of the Grease T ube (2) to allow the F ollower Rod to mo ve f orward into the Grease T ube (See Figure B.) 2. Push the F ollower Handle (19) f orward while depressing the V ent V alve (13). (See Figure D.) 3. Squeeze the Switch (18) several times to operate the Grease Gun until the trap ...
-
Harbor Freight Tools 92196 - page 11
2. Alwa ys clean the grease zerk fitting carefully and completely with a clean cloth prior to inser ting the Grease Gun’ s Coupler (14) onto the grease zerk fitting. (See Figure D.) 3. Inser t the Coupler (14) fully onto the clean grease zerk fitting of the object you are lubr icating. (See Figure D.) 4. With one hand, hold the Grease T ube (2) s ...
-
Harbor Freight Tools 92196 - page 12
SKU 92196 For technical questions, please call 1-800-444-3353 P A GE 1 2 P ARTS LIST PLEASE READ THE FOLLO WING CAREFULL Y THE MANUF A CTURER AND/OR DISTRIBUT OR HAS PRO VIDED THE P AR TS LIST AND ASSEMBL Y DIA GRAM IN THIS MANU AL AS A REFERENCE T OOL ONL Y . NEITHER THE MANUF ACTURER OR DISTRIBUT OR MAKES ANY REPRESENT A TION OR W ARRANTY OF ANY ...
-
Harbor Freight Tools 92196 - page 13
ASSEMBL Y DIA GRAM SKU 92196 For technical questions, please call 1-800-444-3353 P A GE 13 NOTE: Some par ts are listed and shown f or illustration pur poses only , and are not av ailable individually as replacement parts. 26: CARR YING CASE NO T SHO WN. ...
¿Tienes una pregunta acerca de Harbor Freight Tools 92196?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Harbor Freight Tools 92196, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Harbor Freight Tools 92196 probablemente compartirá una forma de solucionarlo.