-
Canon 9322A002 - page 1
EF28-300mm f/3.5-5.6L IS USM Instruction ENG C OP Y ...
-
Canon 9322A002 - page 2
ENG-1 The Canon EF28-300mm f/3.5-5.6L IS USM lens is a powerful high-perf ormance zoom lens for EOS cameras equipped with an Image Stabilizer , and covering a wide range of focal lengths fr om wide angle to telephoto. • "IS" stands for Image Stabiliz er . • "USM" stands for Ultr asonic Motor . Features 1. The Image Stabiliz ...
-
Canon 9322A002 - page 3
T his device complies with P art 15 of the FCC Rules. Operation is subject to the follo wing two conditions: (1) This de vice may not cause harmful interference, and (2) this de vice must accept any interference receiv ed, including interference that ma y cause undesired operation. Do not make any changes or modifications to the equipment unless ot ...
-
Canon 9322A002 - page 4
ENG-3 Hood mount ( → 12) Filter mounting thread ( → 12) Zoom ring ( → 6) Focusing ring ( → 5) Tripod mount ( → 11) Orientation lock knob ( → 11) Image stabilizer switch ( → 7) Image stabilizer mode selector switch ( → 7) Lens mount index ( → 4) Contacts ( → 4) Rubber ring ( → 4) Distance scale ( → 10) Focusing distance range ...
-
Canon 9322A002 - page 5
ENG-4 See your camera’ s instructions for details on mounting and detaching the lens. 1. Mounting and Detaching the Lens • After detaching the lens, place the lens with the rear end up to prev ent the lens surf ace and electrical contacts from getting scratched. • If the contacts get soiled, scratched, or hav e fingerpr ints on them, corrosio ...
-
Canon 9322A002 - page 6
ENG-5 To shoot in autofocus (AF) mode , set the f ocus mode switch to AF . To use only manual f ocusing (MF), set the f ocus mode switch to MF , and focus b y turning the f ocusing ring. The focusing ring alwa ys works, regardless of the focus mode . 2. Setting the Focus Mode After autofocusing in ONE SHO T AF mode , focus manually by pressing the ...
-
Canon 9322A002 - page 7
ENG-6 5. Adjusting Zooming Resistance Y ou can adjust the zooming “touch” (resistance) as needed by holding the f ocusing ring in place and turning the adjustment r ing. Tu rn the adjustment ring towards the word SMOO TH to reduce the zooming touch, or tow ards TIGHT to increase it. T o lock the zoom ring in place, turn the adjustment ring towa ...
-
Canon 9322A002 - page 8
ENG-7 When you press the shutter b utton halfw ay , the Image Stabilizer will start operating. • Make sure the image in the viewfinder is stab le, then press the shutter button the rest of the wa y down to tak e the picture. 6. Image Stabilizer Settings Y ou can use the image stabilizer in AF or MF mode . Set the ST ABILIZER switch to . • If yo ...
-
Canon 9322A002 - page 9
ENG-8 7. Tips on Using the Image Stabilizer • In semi-darkened areas such as indoors or outdoors at night. • In locations where flash photograph y is prohibited, such as ar t museums and theater stages. • In situations where your f ooting is uncertain. •I n situations where fast shutter settings cannot be used. The image stabilizer in this ...
-
Canon 9322A002 - page 10
ENG-9 Tips on Using the Image Stabilizer • When you use a tripod, the Image Stabilizer should be turned off to save battery power . • The stabilizer is equally eff ective f or hand-held photograph y and photograph y with a monopod. • The image stabilizer function also operates when the lens is used with an Extension T ube EF12 ll or EF25 ll. ...
-
Canon 9322A002 - page 11
ENG-10 8. Infinity Compensation Mark To compensate f or shifting of the infinity focus point that results from changes in temperature. The infinity position at normal temperature is the point at which the vertical line of the L mar k is aligned with the distance indicator on the distance scale. The infrared inde x corrects the f ocus setting when u ...
-
Canon 9322A002 - page 12
ENG-11 10. Using the T ripod Mount Adjusting the Rev olving Mount Y ou can loosen the orientation lock-knob on the tripod mount to allow it to rotate as needed to fit a par ticular camera model for s witching betw een vertical and hor izontal positions. Detaching Use the follo wing procedures to remov e and attach the tripod mount. Tu rn the loc ki ...
-
Canon 9322A002 - page 13
ENG-12 11. Hood The EW -83G hood can keep unw anted light out of the lens, and also protects the lens from rain, snow , and dust. To attach the hood, align the hood’ s attachment position mark with the red dot on the front of the lens, then turn the hood as shown by the arro w until the lens' red dot is aligned with the hood's stop posi ...
-
Canon 9322A002 - page 14
ENG-13 13. Extension T ubes (Sold Separately) Y ou can attach Extension T ube EF12 II or EF25 II for magnified shots . The shooting distance and magnification are shown below . Camera-to-Subject Magnification Distance (mm) Near F ar Near F ar EF12 II 28mm 265 277 0.50 × 0.43 × 300mm 604 7594 0.39 × 0.04 × EF25 II 28mm Incompatible 300mm 541 373 ...
-
Canon 9322A002 - page 15
ENG-14 Specifications Focal Length/Aperture 28 – 300 mm f/3.5 – 5.6 Lens Construction 16 groups, 23 elements Minimum Aperture f/22 – 40 * Angle of View Diagonal: 75° – 8° 15’ V ertical: 46° – 4° 35’ Horizontal: 65° – 6° 50’ Min. Focusing Distance 0.7 m/2.3 ft. Max. Magnification 0.3 × ( at 300 mm ) Field of View approx. 436 ...
-
Canon 9322A002 - page 16
© CANON INC. 2004 CT1-8515-004 0812Ni C OP Y ...
¿Tienes una pregunta acerca de Canon 9322A002?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Canon 9322A002, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Canon 9322A002 probablemente compartirá una forma de solucionarlo.