-
Canon 9322A002 - page 1
EF28-300mm f/3.5-5.6L IS USM Instruction ENG C OP Y ...
-
Canon 9322A002 - page 2
ENG-1 The Canon EF28-300mm f/3.5-5.6L IS USM lens is a powerful high-perf ormance zoom lens for EOS cameras equipped with an Image Stabilizer , and covering a wide range of focal lengths fr om wide angle to telephoto. • "IS" stands for Image Stabiliz er . • "USM" stands for Ultr asonic Motor . Features 1. The Image Stabiliz ...
-
Canon 9322A002 - page 3
T his device complies with P art 15 of the FCC Rules. Operation is subject to the follo wing two conditions: (1) This de vice may not cause harmful interference, and (2) this de vice must accept any interference receiv ed, including interference that ma y cause undesired operation. Do not make any changes or modifications to the equipment unless ot ...
-
Canon 9322A002 - page 4
ENG-3 Hood mount ( → 12) Filter mounting thread ( → 12) Zoom ring ( → 6) Focusing ring ( → 5) Tripod mount ( → 11) Orientation lock knob ( → 11) Image stabilizer switch ( → 7) Image stabilizer mode selector switch ( → 7) Lens mount index ( → 4) Contacts ( → 4) Rubber ring ( → 4) Distance scale ( → 10) Focusing distance range ...
-
Canon 9322A002 - page 5
ENG-4 See your camera’ s instructions for details on mounting and detaching the lens. 1. Mounting and Detaching the Lens • After detaching the lens, place the lens with the rear end up to prev ent the lens surf ace and electrical contacts from getting scratched. • If the contacts get soiled, scratched, or hav e fingerpr ints on them, corrosio ...
-
Canon 9322A002 - page 6
ENG-5 To shoot in autofocus (AF) mode , set the f ocus mode switch to AF . To use only manual f ocusing (MF), set the f ocus mode switch to MF , and focus b y turning the f ocusing ring. The focusing ring alwa ys works, regardless of the focus mode . 2. Setting the Focus Mode After autofocusing in ONE SHO T AF mode , focus manually by pressing the ...
-
Canon 9322A002 - page 7
ENG-6 5. Adjusting Zooming Resistance Y ou can adjust the zooming “touch” (resistance) as needed by holding the f ocusing ring in place and turning the adjustment r ing. Tu rn the adjustment ring towards the word SMOO TH to reduce the zooming touch, or tow ards TIGHT to increase it. T o lock the zoom ring in place, turn the adjustment ring towa ...
-
Canon 9322A002 - page 8
ENG-7 When you press the shutter b utton halfw ay , the Image Stabilizer will start operating. • Make sure the image in the viewfinder is stab le, then press the shutter button the rest of the wa y down to tak e the picture. 6. Image Stabilizer Settings Y ou can use the image stabilizer in AF or MF mode . Set the ST ABILIZER switch to . • If yo ...
-
Canon 9322A002 - page 9
ENG-8 7. Tips on Using the Image Stabilizer • In semi-darkened areas such as indoors or outdoors at night. • In locations where flash photograph y is prohibited, such as ar t museums and theater stages. • In situations where your f ooting is uncertain. •I n situations where fast shutter settings cannot be used. The image stabilizer in this ...
-
Canon 9322A002 - page 10
ENG-9 Tips on Using the Image Stabilizer • When you use a tripod, the Image Stabilizer should be turned off to save battery power . • The stabilizer is equally eff ective f or hand-held photograph y and photograph y with a monopod. • The image stabilizer function also operates when the lens is used with an Extension T ube EF12 ll or EF25 ll. ...
-
Canon 9322A002 - page 11
ENG-10 8. Infinity Compensation Mark To compensate f or shifting of the infinity focus point that results from changes in temperature. The infinity position at normal temperature is the point at which the vertical line of the L mar k is aligned with the distance indicator on the distance scale. The infrared inde x corrects the f ocus setting when u ...
-
Canon 9322A002 - page 12
ENG-11 10. Using the T ripod Mount Adjusting the Rev olving Mount Y ou can loosen the orientation lock-knob on the tripod mount to allow it to rotate as needed to fit a par ticular camera model for s witching betw een vertical and hor izontal positions. Detaching Use the follo wing procedures to remov e and attach the tripod mount. Tu rn the loc ki ...
-
Canon 9322A002 - page 13
ENG-12 11. Hood The EW -83G hood can keep unw anted light out of the lens, and also protects the lens from rain, snow , and dust. To attach the hood, align the hood’ s attachment position mark with the red dot on the front of the lens, then turn the hood as shown by the arro w until the lens' red dot is aligned with the hood's stop posi ...
-
Canon 9322A002 - page 14
ENG-13 13. Extension T ubes (Sold Separately) Y ou can attach Extension T ube EF12 II or EF25 II for magnified shots . The shooting distance and magnification are shown below . Camera-to-Subject Magnification Distance (mm) Near F ar Near F ar EF12 II 28mm 265 277 0.50 × 0.43 × 300mm 604 7594 0.39 × 0.04 × EF25 II 28mm Incompatible 300mm 541 373 ...
-
Canon 9322A002 - page 15
ENG-14 Specifications Focal Length/Aperture 28 – 300 mm f/3.5 – 5.6 Lens Construction 16 groups, 23 elements Minimum Aperture f/22 – 40 * Angle of View Diagonal: 75° – 8° 15’ V ertical: 46° – 4° 35’ Horizontal: 65° – 6° 50’ Min. Focusing Distance 0.7 m/2.3 ft. Max. Magnification 0.3 × ( at 300 mm ) Field of View approx. 436 ...
-
Canon 9322A002 - page 16
© CANON INC. 2004 CT1-8515-004 0812Ni C OP Y ...
Do you have a question concerning Canon 9322A002?
Use the form below
If you did not solve your problem by using a manual Canon 9322A002, ask a question using the form below. If a user had a similar problem with Canon 9322A002 it is likely that he will want to share the way to solve it.