-
StarTech.com PEXSAT34RH - page 1
Manual Revision: 04/30/2013 For the most up-to-date information, please visit: www.startech.com DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr .startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.co ...
-
StarTech.com PEXSAT34RH - page 2
Instruction Manual FCC C ompliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radi ...
-
StarTech.com PEXSAT34RH - page 3
Instruction Manual i T able of C ont ents Introduction ............................................................................................ 1 Packaging Conten ts ................................................................................................................................. 1 System Requirements ............................ ...
-
StarTech.com PEXSAT34RH - page 4
Instruction Manual 1 Introduction The PEXSA T34RH 4-Port PCI Express 2.0 SA T A Controller Card with HyperDuo adds 4 AHCI SA T A III por ts to a comput er through a PCIe slot (x2), delivering multiple internal 6Gbps connections for high-performance hard drives and Solid State Drives (SSDs). Fea turing H yperDuo technology , the SA T A card oers ...
-
StarTech.com PEXSAT34RH - page 5
Instruction Manual 2 4x SA T A III por ts P roduc t Diag ram ...
-
StarTech.com PEXSAT34RH - page 6
Instruction Manual 3 Installation Hardwar e I nstallation W ARNING! PCI Express cards, like all comput er equipment, can be severely damaged by static electricity. Be sure tha t you are properly grounded befor e opening your computer case or touching your PCI Expr ess card. StarT ech.com recommends that you wear an anti-static strap when installing ...
-
StarTech.com PEXSAT34RH - page 7
Instruction Manual 4 Driver Installation Window s XP NOTE: The latest driver is a vailable from www.startech.com. 1. Once the computer has started and the operating system is fully loaded , inser t the provided Driver CD into the c omputer ’ s CD/DVD drive. 2. AutoPla y should give you the option to brow se the les on the CD or automatically o ...
-
StarTech.com PEXSAT34RH - page 8
Instruction Manual 5 Management Utility Installation (Optional - Windows only) RAID and/or HyperDuo conguration can be accomplished either through the integrated car d-BIOS utility, or through the Marvell Storage Utility (MSU). Details for installing the MSU are below . T o install the Marvell Storage Utility (MSU) in W indows: 1. Run the MSUSet ...
-
StarTech.com PEXSAT34RH - page 9
Instruction Manual 6 b. F irefox i. Fr om the menu bar, select T ools > Options ii. Select the “Con tent ” tab and ensure that the “Enable Javascript” option is checked (should be by default) – if it is not, select it and click “OK” ...
-
StarTech.com PEXSAT34RH - page 10
Instruction Manual 7 V erifying Installation Window s Fr om the main desktop, right-click on “M y Comput er ” (“Computer” in Vista/7/8), then select Manage. In the new Computer Management window , select D evice Manager from the left window panel. Under the “SCSI and RAID Controllers” category (“Storage Controllers” in Vista or late ...
-
StarTech.com PEXSAT34RH - page 11
Instruction Manual 8 Operation RAID Congura tion Card BIOS Method W ARNING! Creating a RAID virtual disk destroys all data on the physical disks included in the virtual disk set. Make sure to back up all data before continuing . 1. When prompted on startup, pr ess Ctrl+M to enter the card BIOS utility Press <Ctrl>+<M> to ent er BIOS ...
-
StarTech.com PEXSAT34RH - page 12
Instruction Manual 9 6. The “Create Virtual Disk” conguration options appear in the “Information” pane (right-side), here you ar e able to select the R AID level and other conguration options: a. Select 2 HDDs for RAID 0 or RAID 1 b. Select 3 HDDs for RAID 0 c. Select 4 HDDs for RAID 0 or RAID 10 7. After conguring the virtual disk ...
-
StarTech.com PEXSAT34RH - page 13
Instruction Manual 10 3. F rom the “Cr eate new VD” screen that appears, click the “Select RAID Level” drop- down to choose the appropriate RAID type 4. This will enable you to plac e a check box beside the disks tha t you would like to use as part of the RAID set. Once you have selected, click “Next ” to conrm your selection. 5. Y o ...
-
StarTech.com PEXSAT34RH - page 14
Instruction Manual 11 HyperDuo Congura tion HyperDuo oers the following two modes that y ou can congure using either of the procedures outlined in the f ollowing sections: • Safe mode creates a virtual disk that is optimized for best fault t olerance – the frequently accessed les copied t o the SSD for per formance ar e also stored ...
-
StarTech.com PEXSAT34RH - page 15
Instruction Manual 12 7. Highlight “Keep original data” and press Enter to select. Select Y es or No and press Enter . W ARNING! Selecting “No” will destroy all data on the disks included in the virtual disk set. Make sure to back up all data befor e continuing. The “Keep original data ” option is disabled when you choose Capacity mode, ...
-
StarTech.com PEXSAT34RH - page 16
Instruction Manual 13 The newly created HyperDuo drive will then appear in the left pane and begin initializing. This can take up to 30 minutes to complete , and system per f ormance may be slow during this period. HyperDuo Management ( Windo ws only) 1. F rom the left pane of the MSU, select “HyperDuo Service” 2. The right pane will then displ ...
-
StarTech.com PEXSAT34RH - page 17
Instruction Manual 14 3. Select Submit to apply your changes, then select “OK” on the pop -up that follow s. 4. If the folder you would like t o optimize is not available, select “ Advanced” from the “HyperDuo Ser vice ” pane. 5. The “Customiz e Wizar d” will pop-up and allow you to select the desired folders. ...
-
StarTech.com PEXSAT34RH - page 18
Instruction Manual 15 Specications Host Interface PCI Express 2.0 SA T A Revision 3.0 Form F actor F ull/Low Prole Chipset ID Marvell 9230 Internal Connectors 4x 7-pin SA T A plug Maximum Tr ansfer Rate SA T A: 6Gbps RAID Support RAID 0, 1, 1+0 Port Multiplier Y es* Operating T emperatur e 5°C ~ 50°C (41°F ~ 122°F) Storage T emperature -2 ...
-
StarTech.com PEXSAT34RH - page 19
Instruction Manual 16 T echnical Suppor t StarT ech.com’ s lifetime technical support is an int egral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit ww w .startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the la test drivers/ ...
-
StarTech.com PEXSAT34RH - page 20
Hard-to-nd made easy . At StarT ech.com, that isn ’t a slogan. It ’ s a promise. StarT ech.com is your one -stop source for ever y connec tivity part you need. From the latest technology t o legac y pr oduc ts — and all the par ts that bridge the old and new — we can help you nd the parts that connect your solutions. We make it easy t ...
¿Tienes una pregunta acerca de StarTech.com PEXSAT34RH?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con StarTech.com PEXSAT34RH, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con StarTech.com PEXSAT34RH probablemente compartirá una forma de solucionarlo.