-
Waves 2500 - page 1
Waves API 2500 User Manual ...
-
Waves 2500 - page 2
TABLE OF CONTENTS CHAPTER 1 – IN TRODUCTION ....................................................................................................... .........................3 1.1 W ELCOME ...........................................................................................................................................................3 1.2 ...
-
Waves 2500 - page 3
Chapter 1 – Introduction 1.1 Welcome Thank you for choosing Waves! In order to get the most out of your Waves processor, please take the time to read through this manual. In conjunction, we also suggest that you become familiar with www.wa vesupport.net . There you will find an extensive Answer Base , the latest Tech Specs , detailed Installation ...
-
Waves 2500 - page 4
1.2 Product Overview The API 2500 is a versatile dynamics processor that lets you shape the p unch and tone of mixes with absolute accuracy. Its dual channel design lets the 2500 also function a s two separate mono channels via a single compression setting. Using auto-makeup gain, you can adju st Threshold or Ratio while automatically maintaining a ...
-
Waves 2500 - page 5
1.3 Concepts and Terminology There are 3 main parameters that set the API 2500 from other compressors: Thrust, Compression Type, and its adjustable Knee. When used in conjunction with one anoth er, these parameters give the API 2500 unprecedented flexibility. Knee Sets the knee, the manner in which the compressor begins to reduce the gain of the si ...
-
Waves 2500 - page 6
Thrust Sets the Thrust, a proprietary process that inserts a High Pass Filter at the RMS detector input, limiting compression response to lower frequencies while applying additional co mpression to higher frequencies. • In Norm mode, there is no filter and the 2500 functions like a normal compressor. • In Med mode, there is a slight attenuation ...
-
Waves 2500 - page 7
Type Sets the Compression type, which determines the signal source being fe d to the RMS detector. • In New (Feed Forward) mode, the compressor works like newer VCA-based compressors. The RMS detector sends a signal to the VCA that is an exact ratio of the desired compression, set by the ratio control. • In Old (Feed Back) mode, the RMS detecto ...
-
Waves 2500 - page 8
1.4 Components WaveShell technology enables us to split Waves processors into smaller plug-ins, which we call components . Having a choice of components for a particular processor gives you the flexibility to choose a configuration suitable for your material. The API 2500 has two component processors: API 2500 Stereo – A stereo compressor that ma ...
-
Waves 2500 - page 9
Chapter 2 – Quickst art Guide For those of you who are experienced users of audio signal processing tools, we recommend that you approach the API 2500 as you would any compressor whic h you are already familiar. Keep in mind that its Thrust, Compression Type, and Knee parameters offer capabiliti es that transcend other, more conventional, process ...
-
Waves 2500 - page 10
Chapter 3 – Controls and Interface 3.1 Compressor Section Waves API 2500 User Manual - 10 - ...
-
Waves 2500 - page 11
Threshold S ets the point at which compression begins. Threshold for each stereo ch annel is set independently, since each channel has its own RMS detector, even in Link mode. In Auto Gain Make-up mode, the Threshold also affects the gain. Threshold is a co ntinuous control. Range +10dBu to -20dBu (-12dBFS to -42dBFS) Default 0dBu Attack Sets the a ...
-
Waves 2500 - page 12
3.2 Tone Section Knee Sets the Knee, the manner in which the compressor begins to reduce the signal ga in. Range Hard, Med, Soft Default Hard Thrust Sets the Thrust, a proprietary process that inserts a High Pass Filter at the RMS detector input, limiting compression response to lower frequencies while applying additional co mpression to higher fre ...
-
Waves 2500 - page 13
A note about Sidechain: Sidechain lets you trigger the compressor using an exte rnal source, which is fed into the RMS detector and controls the compression of the input signal. Sidechain may only be used in New (Feed Forward) mode. An external sidechain trigger cannot be used in Old (Feed Back) mode; attempting to do so automatically switches the ...
-
Waves 2500 - page 14
3.4 Meter Display Meters The API 2500’s Meters display dBFS. The Gain scale displays the amount of gain reduction during compression with the 0 point located at the far the right, which allows h igher gain reduction scale resolution.. The API 2500 is capable of up to 30dB of reduction. Range 0dB to -24dB (Gain Reduction mode) -24dB to 0dB (Input ...
-
Waves 2500 - page 15
3.5 Output Section Analog Turns the Analog modeling on and off. Range On/Off Default On Output Controls the output level in 0.1dB steps Range +/-24dB Default 0dB Waves API 2500 User Manual - 15 - ...
-
Waves 2500 - page 16
Make-Up Turns Auto Make-Up Gain on and off. Range Auto, Manual Default Auto In Acts as a master bypass for the entire compression chain. When set to Out, all compressor functions are bypassed. Range In/Out Default In Waves API 2500 User Manual - 16 - ...
-
Waves 2500 - page 17
Chapter 4 – The W aveSystem 4.1 The WaveSystem Toolbar All Waves processors feature the WaveSystem t oolbar which takes care of most administrative functions you will encounter while working with your Waves software. The features of the WaveSystem toolbar are the same on practically all Waves processors, so familiarity with its features will be h ...
-
Waves 2500 - page 18
Loading Presets and Setups Click-and-hold on the Load button to see the Load pop-up menu. The menu is divided into four sections. If a section is not currently available it will not appear in the Load pop-up menu. Open Preset File… Select to open any setup or preset file , whether from the Library or your own creations. ‘Filename.xps’: Displa ...
-
Waves 2500 - page 19
Deleting Presets You may delete User Presets and presets within a Setup File. Factory Presets and Setup Library files cannot be deleted or overwritten. 1. Hold the Command (Mac)/Control (PC) key down. 2. Click-and-hold the Load button to see the pop-up menu. 3. While still holding the Command/Control key, select the p reset or setup to delete. 4. A ...
-
Waves 2500 - page 20
Value Window Buttons Value windows display the value of a control and allow click-and-drag adjustment, or direct control via the keyboard . • Using the mouse , click-and-drag on the value window to adjust. Some value windows support left/right, some up/down (as you hover over a button, arrows will appear to let you know which direction of movemen ...
-
Waves 2500 - page 21
Additionally, the Mac has an option-TAB function for ‘down’ movement and shift-option-TAB for ‘up’ movement where applicable. If you have several Value Window Buttons selected, TAB functions will take you through the selected controls only. Waves API 2500 User Manual - 21 - ...
-
Waves 2500 - page 22
Appendix A – API 2500 Controls Control Range Default Threshold +10dBu to -20dBu 0dBu Attack .03ms, .1ms, .3ms, 1ms, 3ms, 10ms, 30ms 1ms Ratio 1.5:1, 2:1, 3:1 4:1 6:1 10:1 inf:1 4:1 Release .05sec, .1sec, .2sec, .5s ec, 1sec, 2sec, Var .5sec Release Variable .05 to3sec in steps of 0.01ms .5sec Knee Hard, Med, Soft Hard Thrust Loud, Med, Norm Norm ...
¿Tienes una pregunta acerca de Waves 2500?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Waves 2500, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Waves 2500 probablemente compartirá una forma de solucionarlo.