Español dropdown-ico

Manual de instrucciones Pelco C1306M-D (7/09)

24 de páginas 1.26 mb
Descargar

Pasar a la página of 24

Summary
  • Pelco C1306M-D (7/09) - page 1

    INSTALLATION C1306M-D (7/09) ExSite ® EHXM Series Explosionproof Fixed Sy stem ...

  • Pelco C1306M-D (7/09) - page 2

    2 C1306M-D (7/09) Contents Important Safe ty Instruct ions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Pelco C1306M-D (7/09) - page 3

    C1306M-D (7/09) 3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed al l warnings. 4. Follow all instructions. 5. Do not bl ock any ven tilation openings. Ins tall in accordance with the manu facturer’ s instructions. 6. T o reduce the risk of ignition of hazar dous atmospheres, di sconnect the equip me ...

  • Pelco C1306M-D (7/09) - page 4

    4 C1306M-D (7/09) Getting Started Thank you for pu rchasing Pe lco’ s ExSite ® EHXM Series explosionproof system. This manu al in cludes in structio ns for i n stalling all th e components of the system. Once the s ystem installati on is comple te, refer to the operat ion/programmi ng manual fo r instructio ns on how to o perate an d program you ...

  • Pelco C1306M-D (7/09) - page 5

    C1306M-D (7/09) 5 Install the Power Module Attach the power module to the mo unting surface. Use only insta llation methods and materials capa ble of supporting fou r times t he maximum specified load o f the system (140 lb /63.5 kg). NOTE: If required, install the option al TXB translator , fiber module , or UTP bo ard before installin g the power ...

  • Pelco C1306M-D (7/09) - page 6

    6 C1306M-D (7/09) CONNECT WIRING Refer to the following informa tion to connect the wires an d cables as required. NOTES: • Relay 3 is a llocated spe cif ically for an external wash er (n ot supplied by Pelco). • All relays are specifie d for 32 VDC, 0.5 A. • Wiring/cable for UTP and fibe r optic are not provided on the wi re harness. T he in ...

  • Pelco C1306M-D (7/09) - page 7

    C1306M-D (7/09) 7 DIP SWITCH SETTINGS Configure the receiver address, termination, and baud se tting for the system. The DIP switches to configure th ese settings are located on the to p of the power module. NOTE: No DIP switch settings are re quired for Coaxitron contr ol. Figure 3 shows the default set tings for the DIP switch es. Refer to the fo ...

  • Pelco C1306M-D (7/09) - page 8

    8 C1306M-D (7/09) ADDRESS SWITCH SETTING SW1-1 SW1-2 SW1-3 SW1-4 SW1-5 SW1-6 SW1-7 SW1-8 1 OFF OFF OFF OFF OFF O FF OFF OFF 2 ON OFF OFF OFF OFF OFF OF F OFF 3 OFF ON OFF OFF OFF OFF OF F OFF 4 ON ON OFF OFF OFF OFF OFF OF F 5 OFF OFF ON OFF OFF OFF OFF OFF 6 ON OFF ON OFF OFF OFF OFF OFF 7 OFF ON ON OFF OFF OFF OFF OF F 8 ON ON ON OFF OFF OFF OFF ...

  • Pelco C1306M-D (7/09) - page 9

    C1306M-D (7/09) 9 ADDRESS SWITCH SETTING SW1-1 SW1-2 SW1-3 SW1-4 SW1-5 SW1-6 SW1-7 SW1-8 49 ON OFF OF F OFF ON ON OFF OF F 50 OFF ON OFF OFF ON ON OFF OFF 51 ON ON OFF OFF ON ON OFF OFF 52 OFF OFF ON OFF ON ON OFF OFF 53 ON OFF ON OFF ON ON OFF OFF 54 OFF ON ON OFF ON ON OFF OFF 55 ON ON ON OFF ON ON OFF OFF 56 OFF OFF OFF ON ON ON OFF OFF 57 ON OF ...

  • Pelco C1306M-D (7/09) - page 10

    10 C1306M-D (7/09) T able B. D Protocol Receiver Address (Continued) ADDRESS SWITCH SETTING SW1-1 SW1-2 SW1-3 SW1-4 SW1-5 SW1-6 SW1-7 SW1-8 143 ON ON ON ON OFF OF F OFF ON 144 OFF OFF OFF OFF ON OFF OFF ON 145 ON OFF OFF OFF ON OFF OFF ON 146 OFF ON OFF OFF ON OF F OFF ON 1 4 7 O N O NO F F O F FO NO F F O F FO N 148 OFF OFF ON OFF ON OFF OFF ON 14 ...

  • Pelco C1306M-D (7/09) - page 11

    C1306M-D (7/09) 11 ADDRESS SWITCH SETTING SW1-1 SW1-2 SW1-3 SW1-4 SW1-5 SW1-6 SW1-7 SW1-8 2 3 9 O NO NO NO N O F F O NO NO N 240 OFF OFF OFF OFF ON ON ON ON 241 ON OFF OFF OFF ON ON ON ON 242 OFF ON OFF OFF ON ON ON ON 2 4 3 O NO N O F F O F F O NO NO NO N 244 OFF OFF ON OFF ON ON ON ON 2 4 5 O N O F F O N O F F O NO NO NO N 246 OFF ON ON OFF ON ON ...

  • Pelco C1306M-D (7/09) - page 12

    12 C1306M-D (7/09) Install the Camera Module T o install the camera mo dule, do th e follo wing: 1. Refer to Figure 4. Loose n the set sc rew at the b ack of the c amera enclosu re with the pr ovided 1.5 mm A llen wrench. Figure 4. Loosen Set Screw 2. Use the supplied spanne r wrench to loosen the ba ck of the camera enclosur e (refer to Figure 5). ...

  • Pelco C1306M-D (7/09) - page 13

    C1306M-D (7/09) 13 3. Slide th e camera modul e into the camera enclos ure. Refer t o Figure 6 to position th e camera modul e properly in the came ra encl osur e. Carefully mate the camer a’ s power connector to the mating con nector located inside the camera enclos ure. Models with a wiper: The tab located in side the camera enclosu re must be ...

  • Pelco C1306M-D (7/09) - page 14

    14 C1306M-D (7/09) 4. Models with a wiper: Refer to Figure 8 and do the fo llowing to in stall the ar m of the wipe r: a. Place the su pplied gree n bushing on the stud l ocated be hind the ha ndle of the camera module . The bushin g should be in the sam e orientatio n as shown in Figure 8. b. Install the wiper arm. Pla ce the rid ge of the arm in ...

  • Pelco C1306M-D (7/09) - page 15

    C1306M-D (7/09) 15 Install the Enclosure and Set Pan Position 1. Check fo r proper se ating of t he power modu le seal. Make sure the se al is fully seated in t he groove o n the top of the powe r m odule. Figure 9. Factory-Installed Power Module Seal 2. Refer to Figure 10 and attach the enclosure un it to the power module . Align the pin s of the ...

  • Pelco C1306M-D (7/09) - page 16

    16 C1306M-D (7/09) Set the T ilt Angle of the Camera Module 1. Place a 41 mm open end or crescent wrench on the tilt locking nu t and a 21 mm open end wre nch on the tilt shaft (refer to Fig ure 11). Figure 11. Set the T ilt Position 2. Hold the til t shaft in position with the 21 mm wrench, and then turn the 41 mm wrench to loosen the tilt locking ...

  • Pelco C1306M-D (7/09) - page 17

    C1306M-D (7/09) 17 Install the Sun Shroud 1. Place the supplied nylon washer s on the 6-32 Phillips pan head screws. Refer to Figure 12. 2. Align the moun ting holes of the sun shroud with the holes on top of th e camera enclosure. 3. Use the supplied nylo n washers and screws t o secure the sun shroud to th e camera enclosure. Figure 12. Install t ...

  • Pelco C1306M-D (7/09) - page 18

    18 C1306M-D (7/09) Maintenance CAMERA MODULE REPLACEMENT T o replace t he camera mod ule, do the f ollowing: 1. Remove the back cap of the came ra enclosure. Refer to Figur e 13 and do the following: a. Loosen the set screw with a 1 .5 mm Allen wren ch. b. Use the sup plied spanner wren ch to loosen the ba ck cap of the ca mera enclosure. O nce the ...

  • Pelco C1306M-D (7/09) - page 19

    C1306M-D (7/09) 19 3. Models with a wiper: Remove the wiper arm an d the green bushing from the unit (r efer to Figure 14 ). 4. Slide the camera modu le out of the enclosure. 5. Install th e new camera mo dule by doin g the follo wing: Slide the came ra module int o the camera enclosure. Refer to Figur e 15 to posi tion the ca mera module pro perly ...

  • Pelco C1306M-D (7/09) - page 20

    20 C1306M-D (7/09) 6. Models with a wiper: Refer to Figure 14 and do the following to re install the arm of the wipe r: a. Reinstall the gree n bushing on the stud locate d behind the handle of the camera module. b. Reinstall the wip er arm. Place the ridge of the arm in th e notc h of the camera enclosure tab an d the slot of the arm over the gree ...

  • Pelco C1306M-D (7/09) - page 21

    C1306M-D (7/09) 21 Specifications ELECTRICAL Input Voltage 24 VAC or 100-240 V AC, 50/60 Hz Input V olt age Range ±10% Power Consumptio n Maximum 60 W (120 VA) per system Heater and Defroster Microprocessor controlled Electrical Connections 6-foot wire harness with c onnections for power , video, da ta control, alarm i nputs , and auxiliary output ...

  • Pelco C1306M-D (7/09) - page 22

    22 C1306M-D (7/09) *Manual control of camera setup functio ns can be done with CM6700, CM 6800, CM8500, CM 9500, CM9740 , CM9760, CM9770, CM9780, KBD200A , KBD300A, and MPT 9500 control lers, but not with CM75 00, MPT9000, o r KBD9000 contr ollers. CAMERA/OPTICS Camera Day/Night (23X) Color LowLight ™ (22X) Color Signal Format NTSC, P AL NTSC, P ...

  • Pelco C1306M-D (7/09) - page 23

    The materials used in the manufacture of this documen t and it s components are compliant to the requirements of Directive 2002/9 5/EC. This equipment contains elec trical or electronic components that must be recy cled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrica l and electronic equi ...

  • Pelco C1306M-D (7/09) - page 24

    Pelco, Inc. Worldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el (800) 289-9100 Fax (800) 289-9150 International T el +1 (559) 292-1981 Fax +1 (559) 348-1120 www .pelco.com ...

Fabricante Pelco Categoría Home Security System

Los documentos del dispositivo Pelco C1306M-D (7/09) que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Pelco
- manuales de instrucciones C1306M-D (7/09)
- hojas de producto Pelco
- folletos informativos
- o etiquetas energéticas Pelco C1306M-D (7/09)
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Pelco C1306M-D (7/09).

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Pelco C1306M-D (7/09), instrucciones de servicio, instrucciones cortas o instrucciones de usuario Pelco C1306M-D (7/09). Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Pelco C1306M-D (7/09).

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Pelco C1306M-D (7/09), ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Pelco C1306M-D (7/09). Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Pelco C1306M-D (7/09).

El manual de instrucciones completo de Pelco debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Pelco C1306M-D (7/09) - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Pelco C1306M-D (7/09), preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Pelco C1306M-D (7/09) que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Pelco C1306M-D (7/09) - que deben facilitarnos los primeros pasos durante el uso de Pelco C1306M-D (7/09)
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Pelco C1306M-D (7/09)
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Pelco C1306M-D (7/09) en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Pelco C1306M-D (7/09)?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Pelco C1306M-D (7/09), haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Pelco C1306M-D (7/09) probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)