Español dropdown-ico

Manual de instrucciones WatchGuard Technologies XTM 5 Series

21 de páginas 0.92 mb
Descargar

Pasar a la página of 21

Summary
  • WatchGuard Technologies XTM 5 Series - page 1

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 1 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system XTM 5 Series De-manufacturing Instructions Document Number: 480-2535-001 ...

  • WatchGuard Technologies XTM 5 Series - page 2

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 2 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 1.0 Purpose This instruction defines the de-manufacturing process for the recovery of this product family as it pertains to recycli ng of the ...

  • WatchGuard Technologies XTM 5 Series - page 3

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 3 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.0 Instruction 3.1 -Remove labels Material removed (part Desc or P/N & material type) Instruction visual Labels Cert. label: 277-2813-00 ...

  • WatchGuard Technologies XTM 5 Series - page 4

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 4 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.2 –Remove back screws holding chassis top to chassis bottom and remove top cover. Material removed (part Desc or P/N & material type) ...

  • WatchGuard Technologies XTM 5 Series - page 5

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 5 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.3 –Depress memory tabs and remove memory. Memory Module 114-3626-001 – 1GB DDR2 Memory Module, 1 ea. Material removed (part Desc or P/N ...

  • WatchGuard Technologies XTM 5 Series - page 6

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 6 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.4 – Unplug power supply cables from motherboard, cut all cable ties, remove power supply screws, and remove power supply. Material remove ...

  • WatchGuard Technologies XTM 5 Series - page 7

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 7 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.5 – Remove screws from the power supply. Material removed (P/N & material type) Instruction visual Power Supply 140-3822-001 – Powe ...

  • WatchGuard Technologies XTM 5 Series - page 8

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 8 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.6 –Remove the top from the power s upply, remove the cable tie and screw inside the power supply, and remo ve fan from the power supply. ...

  • WatchGuard Technologies XTM 5 Series - page 9

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 9 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.7 – Remove labeling from the top lid and the botto m of the power supply. Material removed (P/N & material type) Instruction visual P ...

  • WatchGuard Technologies XTM 5 Series - page 10

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 10 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.8 – Disengage heatsink clamps and remo ve heatsink from motherboard. Material removed (P/N & material type) Instruction visual Heat ...

  • WatchGuard Technologies XTM 5 Series - page 11

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 11 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.9 – Pull back clamp and remove battery. Material removed (P/N & material type) Instruction visual Battery 412-2468-001 – battery, ...

  • WatchGuard Technologies XTM 5 Series - page 12

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 12 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.10 – Remove fan screws from back of chassis. 3.11– Remove screws from fan duct and remove fan duct. Material removed (P/N & mater ...

  • WatchGuard Technologies XTM 5 Series - page 13

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 13 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.12 – Cut cable ties for fans, unplug f ans from motherboard, and remove fans. Material removed (P/N & material type) Instruction vi ...

  • WatchGuard Technologies XTM 5 Series - page 14

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 14 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.13 – Unscrew screws from heatsink and remove heatsink from motherboard. Note that screws cannot be remo ved from the heatsink itself. M ...

  • WatchGuard Technologies XTM 5 Series - page 15

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 15 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.14 – Unlatch CPU from mo therboard and remove CPU. Material removed (P/N & material type) Instruction visual CPU 113-3552-001 – C ...

  • WatchGuard Technologies XTM 5 Series - page 16

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 16 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.15 – Unplug LCD cable from LCD circ uit board and motherboard. Unplug rocker switch cable from mot herboard. Remove LCM cable. Material ...

  • WatchGuard Technologies XTM 5 Series - page 17

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 17 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.16 – Cut cable tie attaching po wer switch cable to chassis. 3.17 – Slide the compact flash ca rd out of the slot and remove. Materia ...

  • WatchGuard Technologies XTM 5 Series - page 18

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 18 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.18 – Remove screws attaching the moth erboard to the chassis and the Cavium card to the chassis. Material removed (P/N & material t ...

  • WatchGuard Technologies XTM 5 Series - page 19

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 19 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.19 – Unplug the Ethernet ports on t he motherboard from the chassis and unplug the Cavium card from the mot herboard. Remove the mother ...

  • WatchGuard Technologies XTM 5 Series - page 20

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 20 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.21 – Use a flat-head screwdriver to disengage the power switch assembly from the chassis. Remove the power switch assembly. Material re ...

  • WatchGuard Technologies XTM 5 Series - page 21

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 21 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.22 – Push tabs on the inside of the bez el to disengage from the chassis. Remove the bezel. A flat-head screwdriver can be useful in th ...

Fabricante WatchGuard Technologies Categoría Washer

Los documentos del dispositivo WatchGuard Technologies XTM 5 Series que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos WatchGuard Technologies
- manuales de instrucciones XTM 5 Series
- hojas de producto WatchGuard Technologies
- folletos informativos
- o etiquetas energéticas WatchGuard Technologies XTM 5 Series
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones WatchGuard Technologies XTM 5 Series.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje WatchGuard Technologies XTM 5 Series, instrucciones de servicio, instrucciones cortas o instrucciones de usuario WatchGuard Technologies XTM 5 Series. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto WatchGuard Technologies XTM 5 Series.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo WatchGuard Technologies XTM 5 Series, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar WatchGuard Technologies XTM 5 Series. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de WatchGuard Technologies XTM 5 Series.

El manual de instrucciones completo de WatchGuard Technologies debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual WatchGuard Technologies XTM 5 Series - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice WatchGuard Technologies XTM 5 Series, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de WatchGuard Technologies XTM 5 Series que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo WatchGuard Technologies XTM 5 Series - que deben facilitarnos los primeros pasos durante el uso de WatchGuard Technologies XTM 5 Series
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con WatchGuard Technologies XTM 5 Series
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de WatchGuard Technologies XTM 5 Series en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de WatchGuard Technologies XTM 5 Series?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con WatchGuard Technologies XTM 5 Series, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con WatchGuard Technologies XTM 5 Series probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)