Русский dropdown-ico

Инструкция обслуживания WatchGuard Technologies XTM 5 Series

21 страниц 0.92 mb
Скачать

Перейти на страницу of 21

Summary
  • WatchGuard Technologies XTM 5 Series - page 1

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 1 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system XTM 5 Series De-manufacturing Instructions Document Number: 480-2535-001 ...

  • WatchGuard Technologies XTM 5 Series - page 2

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 2 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 1.0 Purpose This instruction defines the de-manufacturing process for the recovery of this product family as it pertains to recycli ng of the ...

  • WatchGuard Technologies XTM 5 Series - page 3

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 3 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.0 Instruction 3.1 -Remove labels Material removed (part Desc or P/N & material type) Instruction visual Labels Cert. label: 277-2813-00 ...

  • WatchGuard Technologies XTM 5 Series - page 4

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 4 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.2 –Remove back screws holding chassis top to chassis bottom and remove top cover. Material removed (part Desc or P/N & material type) ...

  • WatchGuard Technologies XTM 5 Series - page 5

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 5 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.3 –Depress memory tabs and remove memory. Memory Module 114-3626-001 – 1GB DDR2 Memory Module, 1 ea. Material removed (part Desc or P/N ...

  • WatchGuard Technologies XTM 5 Series - page 6

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 6 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.4 – Unplug power supply cables from motherboard, cut all cable ties, remove power supply screws, and remove power supply. Material remove ...

  • WatchGuard Technologies XTM 5 Series - page 7

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 7 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.5 – Remove screws from the power supply. Material removed (P/N & material type) Instruction visual Power Supply 140-3822-001 – Powe ...

  • WatchGuard Technologies XTM 5 Series - page 8

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 8 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.6 –Remove the top from the power s upply, remove the cable tie and screw inside the power supply, and remo ve fan from the power supply. ...

  • WatchGuard Technologies XTM 5 Series - page 9

    Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 9 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.7 – Remove labeling from the top lid and the botto m of the power supply. Material removed (P/N & material type) Instruction visual P ...

  • WatchGuard Technologies XTM 5 Series - page 10

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 10 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.8 – Disengage heatsink clamps and remo ve heatsink from motherboard. Material removed (P/N & material type) Instruction visual Heat ...

  • WatchGuard Technologies XTM 5 Series - page 11

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 11 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.9 – Pull back clamp and remove battery. Material removed (P/N & material type) Instruction visual Battery 412-2468-001 – battery, ...

  • WatchGuard Technologies XTM 5 Series - page 12

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 12 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.10 – Remove fan screws from back of chassis. 3.11– Remove screws from fan duct and remove fan duct. Material removed (P/N & mater ...

  • WatchGuard Technologies XTM 5 Series - page 13

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 13 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.12 – Cut cable ties for fans, unplug f ans from motherboard, and remove fans. Material removed (P/N & material type) Instruction vi ...

  • WatchGuard Technologies XTM 5 Series - page 14

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 14 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.13 – Unscrew screws from heatsink and remove heatsink from motherboard. Note that screws cannot be remo ved from the heatsink itself. M ...

  • WatchGuard Technologies XTM 5 Series - page 15

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 15 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.14 – Unlatch CPU from mo therboard and remove CPU. Material removed (P/N & material type) Instruction visual CPU 113-3552-001 – C ...

  • WatchGuard Technologies XTM 5 Series - page 16

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 16 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.15 – Unplug LCD cable from LCD circ uit board and motherboard. Unplug rocker switch cable from mot herboard. Remove LCM cable. Material ...

  • WatchGuard Technologies XTM 5 Series - page 17

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 17 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.16 – Cut cable tie attaching po wer switch cable to chassis. 3.17 – Slide the compact flash ca rd out of the slot and remove. Materia ...

  • WatchGuard Technologies XTM 5 Series - page 18

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 18 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.18 – Remove screws attaching the moth erboard to the chassis and the Cavium card to the chassis. Material removed (P/N & material t ...

  • WatchGuard Technologies XTM 5 Series - page 19

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 19 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.19 – Unplug the Ethernet ports on t he motherboard from the chassis and unplug the Cavium card from the mot herboard. Remove the mother ...

  • WatchGuard Technologies XTM 5 Series - page 20

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 20 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.21 – Use a flat-head screwdriver to disengage the power switch assembly from the chassis. Remove the power switch assembly. Material re ...

  • WatchGuard Technologies XTM 5 Series - page 21

    Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 21 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.22 – Push tabs on the inside of the bez el to disengage from the chassis. Remove the bezel. A flat-head screwdriver can be useful in th ...

Производитель WatchGuard Technologies Категория Washer

Документы, которые мы получаем от производителя устройства WatchGuard Technologies XTM 5 Series мы можем разделить на несколько групп. Это в частности:
- технические чертежи WatchGuard Technologies
- инструкции обслуживания XTM 5 Series
- паспорта изделия WatchGuard Technologies
- информационные брошюры
- энергетические этикетки WatchGuard Technologies XTM 5 Series
Все из них важны, однако самую важную информацию с точки зрения пользователя мы найдем в инструкции обслуживания WatchGuard Technologies XTM 5 Series.

Группа документов, определяемая как инструкции обслуживания, делится также на более подробные типы, такие как: Инструкции монтажа WatchGuard Technologies XTM 5 Series, инструкции обслуживания, короткие инструкции или инструкции пользователя WatchGuard Technologies XTM 5 Series. В зависимости от потребностей, Вам необходимо поискать требуемый документ. На нашем сайте Вы можете просмотреть самую популярную инструкцию использования изделия WatchGuard Technologies XTM 5 Series.

Похожие инструкции обслуживания

Полная инструкция обслуживания устройства WatchGuard Technologies XTM 5 Series, как должна выглядеть?
Инструкция обслуживания, определяемая также как пособие пользователя, или просто "руководство" - это технический документ, цель которого заключается в использовании WatchGuard Technologies XTM 5 Series пользователями. Инструкции пишет, как правило технический писатель, языком, доступным для всех пользователей WatchGuard Technologies XTM 5 Series.

Полная инструкция обслуживания WatchGuard Technologies, должна заключать несколько основных элементов. Часть из них менее важная, как например: обложка / титульный лист или авторские страницы. Однако остальная часть, должна дать нам важную с точки зрения пользователя информацию.

1. Вступление и рекомендации, как пользоваться инструкцией WatchGuard Technologies XTM 5 Series - В начале каждой инструкции, необходимо найти указания, как пользоваться данным пособием. Здесь должна находится информация, касающаяся местонахождения содержания WatchGuard Technologies XTM 5 Series, FAQ и самых распространенных проблем - то есть мест, которые чаще всего ищут пользователи в каждой инструкции обслуживания
2. Содержание - индекс всех советов, касающихся WatchGuard Technologies XTM 5 Series, которое найдем в данном документе
3. Советы по использованию основных функций устройства WatchGuard Technologies XTM 5 Series - которые должны облегчить нам первые шаги во время использования WatchGuard Technologies XTM 5 Series
4. Troubleshooting - систематизированный ряд действия, который поможет нам диагностировать а в дальнейшем очередность решения важнейших проблем WatchGuard Technologies XTM 5 Series
5. FAQ - чаще всего задаваемые вопросы
6. Контактные данные Информация о том, где искать контактные данные производителя / сервисного центра WatchGuard Technologies XTM 5 Series в данной стране, если самостоятельно не получится решить проблему.

У вас вопрос, касающийся WatchGuard Technologies XTM 5 Series?

Воспользуйтесь формуляром, находящимся ниже

Если с помощью найденной инструкции Вы не решили свою проблему с WatchGuard Technologies XTM 5 Series, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с WatchGuard Technologies XTM 5 Series со всей вероятностью он захочет поделиться методом ее решения.

Перепишите текст с картинки

Captcha
Новая картинка

Комментарии (0)