-
Husqvarna 326HS99 - page 1
Oper ator's manual (C ARB II, EP A II) 326HS75 X-series 326HS99 X-series Please read these instructions car efully and make sur e you understand them bef ore using the machine. English ...
-
Husqvarna 326HS99 - page 2
2 – English SYMBOL EXPLANA TION W ARNING! The hedge trimmer can be dangerous! Careless or incorrect use can r esult in serious, even fatal injury . Symbols • This product is in accordance with applicable CE directives. • Always wear approved protective gloves. Checks and/or maintenance should be carried out with the engine switched off, with ...
-
Husqvarna 326HS99 - page 3
English – 3 List of contents SYMBOL EXPLANA TION Symbols ............................................................................... 2 CONTENTS List of contents .................................................................... 3 SAFETY INSTRUCTIONS P ersonal protective equipment ............................................. 4 The machine ? ...
-
Husqvarna 326HS99 - page 4
4 – English 3. Hand guard The hand guard (D) prevents the operator ’ s hands from coming into contact with the blades. For example, if the operator should loose his grip on the front handle. The machine’ s pr otective equipment This section describes the hedge trimmer ’ s protective equip- ment, its function and how checks and maintenance a ...
-
Husqvarna 326HS99 - page 5
English – 5 4. Vibration damping system The hedge trimmer is equipped with a vibration damping system, which is designed to give as vibration- free and comfortable use as possible. The hedge trimmer ’ s vibra- tion damping system reduces the transfer of vibrations between the engine/unit blades and the hedge trim- mer ’ s handles. The engine ...
-
Husqvarna 326HS99 - page 6
6 – English SAFETY INSTR UCTIONS W ARNING! Never use a machine with defective safety equipment. The safety equipment should be maintained as described in this section. If your machine does not meet any of these controls you should contact your service workshop. ! W ARNING! Always stop the engine before starting work on any part of the cutting equ ...
-
Husqvarna 326HS99 - page 7
English – 7 SAFETY INSTR UCTIONS 5. Muffler • N ever use a machine that has a defective muffler . • Check regularly that the muffler is secure. • If your muffler is fitted with a spark arrest screen then it should be cleaned regularly . A blocked screen leads to the engine overheating with serious damage as a result. N ever use a muffler wi ...
-
Husqvarna 326HS99 - page 8
8 – English IMPORT ANT INFORMA TION • The machine is only designed for cutting branches and twigs. • Never use the machine if you are tired, if you have consumed alcohol, or if you are taking medicines that can affect your sight, your judgement or the control of y our body . • Use personal protective equipment. See the section ” Personal ...
-
Husqvarna 326HS99 - page 9
English – 9 SAFETY INSTR UCTIONS Safety instructions when using the hedge trimmer ! Protective instructions while working • Always ensure you have a safe and firm working position. • Always use both hands to hold the machine. Hold the machine in front of you. • U se your left hand to operate the throttle. • Make sure that your hands and f ...
-
Husqvarna 326HS99 - page 10
10 – English Basic working techniques • When cutting the sides of a hedge, work from the bottom upwards. When cutting horizontally, work from right to left. • Adjust the throttle setting to suit the load. • When trimming a hedge the engine should always be turned away from the hedge. • The hedge trimmer should be held as close to the body ...
-
Husqvarna 326HS99 - page 11
English – 11 WHA T IS WHA T? 11. Air purge 12. Choke 13. Throttle trigger lock 14. Throttle trigger 15. Stop switch 16. Air filter cover 17. Spar k plug spanner 18. Allen key 19. Blade cov er (T ranspor t) 20. Catcher (accessory) What is what on the hedge trimmer? 1. Operator ’ s Manual 2. Grease nipple 3. Gearbox 4. Blades 5. Hand guard 6. Han ...
-
Husqvarna 326HS99 - page 12
12 – English FUEL HANDLING Fuel mixture • Clean around the fuel cap. Contamination in the tank can disrupt operations. • Ensure that the fuel is well mixed by shaking the container before filling the tank. W ARNING! Always provide good ventilation when handling fuel. ! Fuelling W ARNING! The following precautions reduce the risk of fire: Do n ...
-
Husqvarna 326HS99 - page 13
English – 13 Warm engine IGNITION: Set the stop switch to the start position. CHOKE: Set the choke control in the choke position and then back again to its original position (B) In this way only the start throttle is applied with no choke. AIR PUR GE: P ress the air purge diaphragm repeatedly until fuel begins to fill the diaphragm. The diaphragm ...
-
Husqvarna 326HS99 - page 14
14 – English MAINTENANCE Carburetor Y our H usqvarna product has been designed and manufactured to specifications that reduce harmful emissions. After your unit has been run 8-10 tanks of fuel the engine has broken in. T o ensure that your unit is at peak performance and producing the least amount of harmful emissions after break in, have your au ...
-
Husqvarna 326HS99 - page 15
English – 15 MAINTENANCE Adjust the idling speed with the screw T , if it is necessar y to readjust. F irst turn the idle speed adjusting screw T clockwise until the blades start moving. Then turn the screw anti-clockwise until the blades stop. The idle speed is correctly adjusted when the engine runs smoothly in every position. There should be a ...
-
Husqvarna 326HS99 - page 16
16 – English MAINTENANCE Cooling system T o maintain as low opera- ting temperature as possible the engine is equipped with a cooling system. The cooling system consists of: 1. An air intake on the starter unit. 2. Cooling fins on the flywheel. 3. Cooling fins on the cylinder 4. Cylinder co ver (leads cold air onto the cylin- der). Clean the cool ...
-
Husqvarna 326HS99 - page 17
English – 17 MAINTENANCE Air filter The air filter (A) should be cleaned regularly remo ving dust and dirt to avoid: • carburetor malfunction • starting problems • reduced engine power • unnecessary wear to engine parts • abnormal fuel consump- tion Clean the filter after every 25 hours or more regularly if operating conditions are exce ...
-
Husqvarna 326HS99 - page 18
18 – English Maintenance schedule Below you will find some general maintenance instructions. Daily maintenance • Check throttle trigger and throttle trigger lockout function. • Check stop switch function. • Check that the blades do not rotate while idling or when the choke is in the start position. • Clean the exterior of the machine. • ...
-
Husqvarna 326HS99 - page 19
English – 19 326HS75 1,50/24,5 1,34/34 1,06/27 2 700 11 000 0,9 kW / 9 000 rpm Ye s Ye s W albro MB Champion R CJ 6Y 0,02/0,5 Zama C1Q 1,06/0,5 12,3/5,6 96 3,3/3,6 7,1/6,2 720 4 695 T echnical data Engine Displacement, cu in/cm 3 C ylinder bore, inch/mm S troke length, inch/mm I dling speed, rpm Recommended max. speed rpm Max. engine output, acc. ...
-
Husqvarna 326HS99 - page 20
20 – English WHAT IS COVERED REPAIR OR REPLACEMENT OF PARTS Repair or replacement of any warranted part will be performed at no charge to the owner at an approved Husqvarna Forest & Garden servicing dealer. If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing deale ...
-
Husqvarna 326HS99 - page 21
English – 21 ...
-
Husqvarna 326HS99 - page 22
´+H
¿Tienes una pregunta acerca de Husqvarna 326HS99?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Husqvarna 326HS99, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Husqvarna 326HS99 probablemente compartirá una forma de solucionarlo.