Español dropdown-ico

Manual de instrucciones Boca Systems Muon Liquid Handling System None

14 de páginas 0.76 mb
Descargar

Pasar a la página of 14

Summary
  • Boca Systems Muon Liquid Handling System None - page 1

    Muon Liquid Handling System User Guide C. Johnson, S.P. Cottrell et al Version 0.2 - 1 - ...

  • Boca Systems Muon Liquid Handling System None - page 2

    Contents 1 Getting Started 3 1.1 Layout of the liquid handling system 3 1.2 Layout of the in situ sample stick 4 1.3 Layout of the pump 4 2 General procedures 6 2.1 Sample loading 6 2.1.1 Loading Vessel 1 6 2.1.2 Loading Vessel 2 6 2.2 Evacuation of the system 6 2.2.1 Removing air from Vessel 1 7 2.2.2 Removing air from Vessel 2 7 2.2.3 Removing ai ...

  • Boca Systems Muon Liquid Handling System None - page 3

    1 Getting S t arted This manual describes the liquid handling system and the in situ sample cell as use d on the DEVA instrument with the “RF” spect rometer, for either norm al muon spins relaxation or RF resonance experiments. 1.1 Layout of the liquid handling sy stem The Muon Liquid Handling System has been designed to facilitate the in situ ...

  • Boca Systems Muon Liquid Handling System None - page 4

    1.2 Layout of the in situ sample stick The liquid sample stick is designed to fit into the DEVA flow cryostat, de tails of which can be found in the DEVA manual. It consists of a shapol target cell 30 mm x 30 mm with a mylar window upon which may be mounted an RF coil. Two stainless steel capillaries provide a mean s of flowing liquid into and out ...

  • Boca Systems Muon Liquid Handling System None - page 5

    Roughing/ Turbo switch Off/Run switch Pressure reading Turbo control panel Turbo Pump Rotary Pump Figure 2 The layout of the fr ont panel on t he vacuum pump use d with the m uon liquid handling system. - 5 - ...

  • Boca Systems Muon Liquid Handling System None - page 6

    2 General procedures 2.1 Sample loading At this point, the system will be open to the atmo sphere, ensure that valve V2 is closed to prevent air cond ensation in the cold trap. 2.1.1 Loading Vessel 1 • Open the tap on the right-hand side of Vessel 1. • Open tap A and valve V11. • The liquid should be poured into the system very slowly to avoi ...

  • Boca Systems Muon Liquid Handling System None - page 7

    2.2.1 Removing air from Vessel 1 Once the system has been pressuris ed, tap A on Vessel 1 can be opened. It is possible to bubbled helium gas through the sample liqui d against the non-retu rn valve, V13. If this is required, first ensure th at valves V 5, V7 and V8 are closed. Open valves V10 and V6, finally opening tap B slowly in order to regula ...

  • Boca Systems Muon Liquid Handling System None - page 8

    2.3 Freeze-Pump-Thaw cycle Using this system it is p ossible to op erat e freeze-pump-thaw cycles on sam ple liquids held in any of the three vessels. Procedur es appropriate to ea ch vessel are outlined below. 2.3.1 Sample in Vessel 1 • All taps and valves should be closed. • Open valve V2 and tap A on Vessel 1, and freeze the sample liquid by ...

  • Boca Systems Muon Liquid Handling System None - page 9

    2.3.3 Sample in Vessel 3 • All taps and valves should be closed. • Open valves V2 and V3 along with tap C on Vessel 3 and freeze the sample liquid by slowly raising a dewa r of liquid nitrogen around it. • When it has been determined that the liquid ha s completely frozen switch the pump to roughing mode and open valve V1. • Switch the pump ...

  • Boca Systems Muon Liquid Handling System None - page 10

    2.4.2 Vessel 3 to sample cell The transfer of liquid from Vessel 3 to the sample cell is brought about by the difference in pressure between that in the Vessel and a vacuum in the cell. However, in order to control the transfer of liquid th e pressure difference shou ld be as small as possible but not so low that the liquid starts to boil. • Swit ...

  • Boca Systems Muon Liquid Handling System None - page 11

    2.4.4 Recovery of liquid in sample cell to Vessel 1 The liquid in the sample cell cannot be recovered to Vessel 1 using the liquid handling rig as presently configured. 2.4.5 Recovery of liquid in sample cell to Vessel 2 The liquid in the sample cell can be r ecovered to Vessel 2 using the following procedure. • Vessel 2 should be under vacuum al ...

  • Boca Systems Muon Liquid Handling System None - page 12

    • All the liquid may not return in a single pass and repea ting the evacuation procedure may be required. However, some liquid m ay be present in the system and care should be taken during evacuation that th e trap does not become blocked. The liquid may also be encouraged to leave the sample cell by using a small amount of gas. • Close valve V ...

  • Boca Systems Muon Liquid Handling System None - page 13

    3 Example Experiment The paramagnetic signal in liquid n-hexane is difficult to observe because the muonium polarisation is found to decay on a microsecond time scale, which is further reduced by the presence of dissolved oxygen. A series of commi ssioning experim ents were carried out using n-hexane in order to gauge the ability of the liquid hand ...

  • Boca Systems Muon Liquid Handling System None - page 14

    0.0 0.5 1.0 1.5 2.0 2.5 3.0 11.0 11.5 12.0 12.5 13.0 13.5 Initial asymmetry (%) Time ( µ s) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 11.0 11.5 12.0 12.5 13.0 Initial asymmetry (%) Time ( µ s) 1.5 2.0 2.5 3.0 0.0 0.5 1.0 11.0 11.5 12.0 12.5 13.0 13.5 Initial asymmetry (%) Time ( µ s) a) b) c) Figure 1 Muonium precessio n signal at 2G in n-he xane after a) 4, ...

Fabricante Boca Systems Categoría Heat Pump

Los documentos del dispositivo Boca Systems Muon Liquid Handling System None que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Boca Systems
- manuales de instrucciones Muon Liquid Handling System None
- hojas de producto Boca Systems
- folletos informativos
- o etiquetas energéticas Boca Systems Muon Liquid Handling System None
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Boca Systems Muon Liquid Handling System None.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Boca Systems Muon Liquid Handling System None, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Boca Systems Muon Liquid Handling System None. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Boca Systems Muon Liquid Handling System None.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Boca Systems Muon Liquid Handling System None, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Boca Systems Muon Liquid Handling System None. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Boca Systems Muon Liquid Handling System None.

El manual de instrucciones completo de Boca Systems debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Boca Systems Muon Liquid Handling System None - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Boca Systems Muon Liquid Handling System None, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Boca Systems Muon Liquid Handling System None que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Boca Systems Muon Liquid Handling System None - que deben facilitarnos los primeros pasos durante el uso de Boca Systems Muon Liquid Handling System None
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Boca Systems Muon Liquid Handling System None
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Boca Systems Muon Liquid Handling System None en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Boca Systems Muon Liquid Handling System None?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Boca Systems Muon Liquid Handling System None, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Boca Systems Muon Liquid Handling System None probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)