-
Magnadyne MV1020 - page 1
Owner's Manual Mobile DVD/CD Player with 10.2" TFT Monitor Model: MV1020 / MV1020C For operational or technical assistance, after reading this manual, please call us toll free at (800) 638-3600 or visit www .magnadyne.com ...
-
Magnadyne MV1020 - page 2
2 Safety Information . . . . . . . . . . . . . . . . . . . . 2-3 Disc and SD Card Notes . . . . . . . . . . . . . . . . . 4 Screen and DVD/CD Functions . . . . . . . . . . 5-7 Location of Functions . . . . . . . . . . . . . . . . . . 5 T urning the Unit On . . . . . . . . . . . . . . . . . . . 6 Adjusting the Monitor . . . . . . . . . . . . . . . . ...
-
Magnadyne MV1020 - page 3
3 Features • This unit can play compatible discs recorded in either P AL or NTSC format. • CD, DVD, CD-R, CD-RW and MP3 Compatible. • SD Card Support. • Full-Function Wireless Remote Controller . • Multi-Language On-Screen Display Menu. • Built-In Dome Light System. • Front Panel Controls. • Wireless IR T ransmitter Module so audio ...
-
Magnadyne MV1020 - page 4
Disc Formats Supported by this Player: Discs which cannot be played with this player: • DVD-ROM • DVD-R/DVD-RAM • CDV • CD-G 4 Disc and SD Card Notes V I D E O (Single-sided disc only) 8 cm disc 8 cm disc Label side up Do not touch the underside of the disc Do not bend Wipe the disc from center toward the outside edge. Disc Handling • Dir ...
-
Magnadyne MV1020 - page 5
5 Screen and DVD/CD Functions 1. POWER Button: Press this button to turn the unit On/Off. 2. SOURCE Button: Press this button to change the play source between DVD/CD player and an auxiliary input source. 3. STOP Button: Stops play of picture or audio. 4. Power On LED Indicator 5. Infrared Remote Sensor: Receives the signals from the remote control ...
-
Magnadyne MV1020 - page 6
T urning the Unit On: Press the POWER on either the remote or the screen housing. Adjusting the Monitor: 1. Press the MODE button on the remote to activate the monitor adjustment menu. The following will be displayed on the screen: 2. Press the MODE button again to select the adjustment bar . 3. Use the UP and DOWN buttons on the remote to adjust t ...
-
Magnadyne MV1020 - page 7
Screen and DVD/CD Functions 7 Dome Light Switch Infrared Remote Control Sensor: The Infrared remote control sensor receives the signals from the remote control. Wireless T ransmitter Modules Wireless T ransmitter Modules: The audio signal is converted to an infrared light and FM frequency that is transmitted to the IR headphones or the vehicle’ s ...
-
Magnadyne MV1020 - page 8
8 1 9 10 6 18 19 11 13 22 23 24 14 15 17 5 2 3 4 16 20 21 8 12 7 25 POWER AUDIO ANGLE SUBTITLE DISPLA Y SETUP PLA Y/PAUSE PROG CLEAR PREV REV SLOW SD TITLE NEXT FWD A-B REPEA T SOURCE VOL– ZOOM PBC MENU SEARCH ENTER RETURN STOP EJECT VOL+ MOD E TFT FUN CTION UP MUTE DOWN 1 4 7 2 5 8 0 10+ 3 6 9 Remote Control Locations and Operation 1. POWER : T ...
-
Magnadyne MV1020 - page 9
POWER AUDIO ANGLE SUBTITLE DISPLA Y SETUP PLA Y/PAUSE PROG CLEAR PREV REV SLOW SD TITLE NEXT FWD A-B REPEA T SOURCE VOL– ZOOM PBC MENU SEARCH ENTER RETURN STOP EJECT VOL+ MOD E TFT FUN CTION UP MUTE DOWN 1 4 7 2 5 8 0 10+ 3 6 9 30 29 26 27 28 31 32 Remote Control Locations and Operation 26. Use CURSOR buttons when selecting items or to move curso ...
-
Magnadyne MV1020 - page 10
Slow Play Each time the SLOW button is pressed during DVD play the speed is reduced as follows: 10 Basic Operation and Special Functions Display DVD Menu Screen 1. Press the MENU button to display the DVD menu screen. 2. Use the cursor button to select item. 3. Press ENTER or PLA Y to play the selected. Searching for a Specific Chapter or T rack 1. ...
-
Magnadyne MV1020 - page 11
11 Special Functions and Setup Menu DVD SPECIAL FUNCTIONS (Continued) Multi-Subtitle Language Function Press the SUBTITLE button during playback. Each time the button is pressed the subtitle language on the screen changes. Multi-Audio Language Function Press the AUDIO button during playback. Each time the button is pressed the audio sound- track la ...
-
Magnadyne MV1020 - page 12
12 Setup Menu DISC SETTINGS Use the CURSOR buttons to make DISC setting selections. Press the ENTER button to confirm the setting. Audio Setting Use this screen to setup the audio language on multi-language discs. Subtitle Language Setting Use this screen to setup the subtitle language on multi-subtitle language discs. Menu Language Setting Use thi ...
-
Magnadyne MV1020 - page 13
Setup Menu VIDEO SETTINGS Use the CURSOR buttons to make VIDEO setting selections. Press the ENTER but- ton to confirm the setting. TV Aspect Setting Use this screen to setup the desired TV Aspect Ratio. AUDIO SETTINGS Use the CURSOR buttons to make AUDIO setting selections. Press the ENTER but- ton to confirm the setting. TV System Setting Use thi ...
-
Magnadyne MV1020 - page 14
14 Setup Menu Last Play Function The Last Play function automatically book- marks the position on a DVD/CD disc and remembers the playback settings. Playback will resumes at the position which the player was turned off, the disc was ejected, or the power was cut off. T urning Off Last Play Function Press the SETUP button to display the main menu. T ...
-
Magnadyne MV1020 - page 15
15 Installation When installing the MV1020 using a Custom Bracket Mounting System refer to the instructions included wi th with the bra cket. War ning: T ake e x tra ca re not to p enetrate the roof of your v ehicle during i nst allati on. Veh icl e ’ s Cei ling Su pp ort Beams Custom B ra cket Mou n t ing System (Opt i o na l) Custom Sh r oud/B ...
-
Magnadyne MV1020 - page 16
16 Wiring Diagram Black (Video Out) White (L-Audio Out) Red (R-Audio Out) Audio Video Output (Female RCA) Mini DIN Connector Black Wire - Ground Red Wire - Ignition Y ellow Wire - Batter y Blue Wire - Door (+) Y ellow (Video In) White (L-Audio In) Red (R-Audio In) Audio Video Input (Female RCA) 3A ...
-
Magnadyne MV1020 - page 17
17 Power Harness Wiring: The 4-wire harness provides battery and ignition 12 volts as well as a chassis ground. Route the power harness to the point in the vehicle that you will make the connections. Red Wire: The red wire in the harness should be connected to a +12 volt power wire that is turned on and of by the position of the ignition key . Y el ...
-
Magnadyne MV1020 - page 18
18 Only qualified service personnel can remove the cover or service this player . Other wise the warranty will become invalid. No Power: • Check to see if the player is set to “On”. • Check to see that the power plug of the main unit is properly connected. • Check to see if that power to the outlet is properly working. No Picture: • Che ...
-
Magnadyne MV1020 - page 19
19 Replacement Parts Order Form Send Orders T o : Magnadyne Corporation We Accept Checks, Money Orders, Visa and Master Card A TTN: Consumer Parts Sales Make Checks Payable to: Magnadyne Corporation P . O. Box 5365 Carson, CA 90749-5365 SHIP TO: (No P .O. Boxes) LAST NAME FIRST NAME INITIAL STREET ADDRESS (IF P AYING WITH A CREDIT CARD, YOUR BILLIN ...
-
Magnadyne MV1020 - page 20
Order By Mail Replacement Parts for MovieVision ® Systems DESCRIPTION MODEL # PRICE DVD Remote Control MV-1020RM $39.95 Ea. ONE (1) YEAR LIMITED WARRANTY Magnadyne Corporation or its authorized agents will within 1 year from the date of sale to you, repair , replace or refund the retail sales price of said product or any part thereof, at the optio ...
¿Tienes una pregunta acerca de Magnadyne MV1020?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Magnadyne MV1020, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Magnadyne MV1020 probablemente compartirá una forma de solucionarlo.