-
Zenoah HT2310 - page 1
GB-1 G B HT2310 / CHT2310 HT2310 CHT2310 G B OWNER’S MANUAL HEDGE TRIMMER 848D0593A0 (706) ...
-
Zenoah HT2310 - page 2
GB-2 HT2310 / CHT2310 EXPLANA TION OF SYMBOLS AND SAFETY W ARNINGS APPROV AL NUMBER OF CE EXHAUST EMISSION REGULA TION e13*97/68SH2G3*2002/88*0104*04 W ARNING!!! RISK OF DAMAGING HEARING W ear head, eye and ear protection. W ARNING!!! RISK OF DAMAGING HEARING W ear head, eye and ear protection. HT2310 CHT2310 HTZ2310 22.5 cm 3 108 dB(A) 97 dB(A) 9. ...
-
Zenoah HT2310 - page 3
GB-3 G B HT2310 / CHT2310 SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury , and for this reason you are requested to read all such instructions carefully and follow them without fail. W ARNINGS IN THE MANU ...
-
Zenoah HT2310 - page 4
GB-4 HT2310 / CHT2310 2. Specification Model ............................................................................................. HT2310 / CHT2310 Ty pe ................................................................................................ double-action type HT2310 / CHT2310 ..................................................... S ...
-
Zenoah HT2310 - page 5
GB-5 G B HT2310 / CHT2310 3. W arning labels on the machine 4. Symbols on the machine Read owner ’ s manual before operat- ing this machine. W ear head, eye and ear protection. W arning / Attention Keep all children, bystanders and helpers 15 meters away from the machine. If warning label peels off or becomes soiled and impossible to read, you sh ...
-
Zenoah HT2310 - page 6
GB-6 HT2310 / CHT2310 2. Never use the product, a. when the ground is slippery or when you can’t maintain a steady posture. b. At night, at times of heavy fog, or at any other times when your field of vision might be limited and it would be diffi- cult to gain a clear view of the working area. c. During rain storms, during lightning storms, at ti ...
-
Zenoah HT2310 - page 7
GB-7 G B HT2310 / CHT2310 BEFORE ST AR TING THE ENGINE 1. The area within a perimeter of 15 m of the person using the product should be consider ed a hazardous ar ea into which no one should enter . If necessar y , yellow warning rope, warning signs should be placed around the pe- rimeter of the area. When work is to be perfor med simultaneously by ...
-
Zenoah HT2310 - page 8
GB-8 HT2310 / CHT2310 7. While operating the machine be always sure of a safe and secur e operating position especially when using steps or a ladder . • IF SOMEONE COMES 1. Guard against hazar dous situa- tions at all times. W ar n adults to keep pets and children away fr om the area. Be car eful if you ar e ap- proached. Injury may result fr om ...
-
Zenoah HT2310 - page 9
GB-9 G B HT2310 / CHT2310 ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 (when using ZENOAH genuine oil) • Exhaust emission are controlled by the funda- mental engine parameters and components (eq., carburation, ignition timing and port timing) with- out addition of any major hardware or the intro- duction of an inert material during combustio ...
-
Zenoah HT2310 - page 10
GB-10 HT2310 / CHT2310 5. Place the unit on a flat, firm place. Keep the cutting head clear of everything around it. 6. While holding the unit firmly , pull out the star ter rope quickly until engine fires. 7. After the engine has started, allow the engine to war m up. Pull the throttle lever . STOPPING ENGINE 1. Release the throttle lever and run ...
-
Zenoah HT2310 - page 11
GB-11 G B HT2310 / CHT2310 CUTTING WORK W ARNING • W eather conditions and altitude may effect carburation. • Do not allow anyone to stay close to the hedge- trimmer while working or while adjusting the car- buretor . HOW TO USE : HANDLE (CHT2310) • T o reduce fatigue when trimming hedges, the handle can be swivelled through 45° or 90° to t ...
-
Zenoah HT2310 - page 12
GB-12 HT2310 / CHT2310 W ARNING • Make sure that the engine has stopped and is cool before performing any service to the machine. Con- tact with moving cutting head or hot muffler may result in a personal injury . BLADE ･ Check the blade and the fasteners for looseness, cracking, or bending. ･ Check the cutting edges and reform with a f ...
-
Zenoah HT2310 - page 13
GB-13 G B HT2310 / CHT2310 SP ARK PLUG • Starting failure and misfiring ar e often caused by a fouled spark plug. Clean the spark plug and check that the plug gap is in the correct range. For a r e- placement plug, use the correct type specified by ZENOAH. • REPLACEMENT PLUG IS A CHAMPION RCJ6Y or NGK BPMR7A. IMPORT ANT • Note that using any ...
-
Zenoah HT2310 - page 14
GB-14 HT2310 / CHT2310 PROCEDURES TO BE PERFORMED AF- TER EVER Y 100 HOURS OF USE 1. Remove the muffler , insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent and cylin- der exhaust port at the same time. 2. Tighten all screws, bolts, and fittings. 3. Check to see if any oil ...
-
Zenoah HT2310 - page 15
GB-15 G B HT2310 / CHT2310 Limited warranty Should any failure occur on the pr oduct under nor mal operating conditions within the applicable warranty pe- riod, the failed part will be replaced or repair ed free of charge by a ZENOAH authorized dealer . W ARRANTY PERIOD: 1 year (6 months if used profes- sionally , and 30 days if used for rental pur ...
¿Tienes una pregunta acerca de Zenoah HT2310?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Zenoah HT2310, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Zenoah HT2310 probablemente compartirá una forma de solucionarlo.