Español dropdown-ico

Manual de instrucciones Roland XR-640

80 de páginas No relevante
Descargar

Pasar a la página of 80

Summary
  • Roland XR-640 - page 1

    This document describes the characteristics of special color inks (white ink and metallic silver ink) used with SOLJET PRO 4 series printers, important notes, maintenance , and printing method using these inks. F or other matters, r efer to Setup Guide and User's Manual of your printer . When you use metallic silver ink and white ink, be sure ...

  • Roland XR-640 - page 2

    Thank you very much for purchasing this product.  T o ensure correct and saf e usage with a full understanding of this product's performance, please be sure t o read through this manual completely and store it in a saf e location.  Unauthorized copying or transf eral, in whole or in part, of this manual is prohibited.  The contents of ...

  • Roland XR-640 - page 3

    1 Contents Contents ........................................................................................................ 1 Chapter 1 Getting Started ................................................................................... 3 1-1 What This Document Assumes and Related Manuals ............................ 4 What This Document Assumes .. ...

  • Roland XR-640 - page 4

    Contents 2 http://www.r olanddg.com/ Copyright © 2012 Roland DG Corporation Chapter 4 Advanced .......................................................................................... 57 4-1 Pullback printing: Equipped with White & Silver ................................... 58 Pullback printing ( White  Metallic silver/CMY KLcLm) ........ ...

  • Roland XR-640 - page 5

    Chapter 1 Getting Started 1-1 What This Document Assumes and Related Manuals ............. 4 What This Document Assumes ................................................... 4 Related Manuals .......................................................................... 4 V ersaWorks Online ................................................................ ...

  • Roland XR-640 - page 6

    4 Chapter 1 Getting Started Chapter 1 Getting Started 1-1 What This Document Assumes and Related Manuals What This Document Assumes Before performing any operations described in this guide , make sure that all the following pr eparations have been complete.  Hardware setup , such as the assembly and installation of SOL JET PRO4 series printer (h ...

  • Roland XR-640 - page 7

    5 Chapter 1 Getting Started Chapter 1 Getting Started 1-2 Before Starting Operations *If equipped with both Metallic Silver ink and White ink, Lk (Light Black) ink is not used. Ignore "Lk" in this manual. Important: Characteristics of Inks and Important Notes The usage and handling of white ink and metallic silver ink in volve some import ...

  • Roland XR-640 - page 8

    Chapter 1 Getting Started 6 Chapter 1 Getting Started 1-3 Important Notes on Printing *If equipped with both Metallic Silver ink and White ink, Lk (Light Black) ink is not used. Ignore "Lk" in this manual. Using the Middle Pinch Rollers in Printing and Cutting Since metallic silver ink and white ink ar e dicult to dry, the middle pinch ...

  • Roland XR-640 - page 9

    Chapter 1 Getting Started 1-3 Important Notes on Printing Chapter 1 Getting Started 7 Important Notes in Using T ransparent Media Loading T ransparent Media  Set the [EDGE DETEC TION] menu item to "DISABLE" . T ransparent media cannot be loaded unless this set- ting is made.  Ensure a margin of at least 75 mm from the leading edge o ...

  • Roland XR-640 - page 10

    8 ...

  • Roland XR-640 - page 11

    Chapter 2 Getting Ready 2-1 Preparing V ersaWorks ........................................................... 10 Starting V ersaWorks .................................................................. 10 Creating a Folder for Saving PS Files ....................................... 10 2-2 Printer Preparations ........................................ ...

  • Roland XR-640 - page 12

    10 Chapter 2 Getting Ready Chapter 2 Getting Ready 2-1 Preparing V ersaWorks Starting V ersaWorks On the computer you ar e using, start V ersaWorks. F or information on how to start the program, see the Roland V ersaW orks Quick Star t Guide. After starting the program, go to the upper left of the main screen and check t o make sure that "Mode ...

  • Roland XR-640 - page 13

    11 Chapter 2 Getting Ready Chapter 2 Getting Ready 2-2 Printer Preparations Making the Printer Settings and Loading Media When Using T ransparent Media When you're using tr ansparent media, make the necessary printing settings on the printer and load the media accordingly . Procedure  In the menu of the printer , set [EDGE DETECTION] to &qu ...

  • Roland XR-640 - page 14

    Chapter 2 Getting Ready 12 Chapter 2 Getting Ready 2-3 Creating Printing Data Basic Approach for Creating Printing Data When Using Metallic Silver Ink Y ou can create the printing da ta according to the two methods belo w .  Specify the spot color so as to use only the metallic silver ink. Apply the spot color named "RDG_MetallicSilver" ...

  • Roland XR-640 - page 15

    Chapter 2 Getting Ready 2-3 Creating Printing Data Chapter 2 Getting Ready 13  Open folders in the order of [Computer] (or [My Computer]) → [OS (C:) ( or [Local Disk (C:)]) ] → [Program Files] → [Roland V ersaWorks] → [Swatch] → [Illustrator], then select "Roland V ersaWorks.ai" Depending on the settings of your computer , th ...

  • Roland XR-640 - page 16

    2-3 Creating Printing Data Chapter 2 Getting Ready Chapter 2 Getting Ready 14 2. Create the illustration, and specify the spot color that matches the color you want to print.  Create the illustration. Be sure to draw the illustr ation in the CMYK mode.  Specify each spot color that matches the color you want to print. Desired ink or color Spo ...

  • Roland XR-640 - page 17

    Chapter 2 Getting Ready Chapter 2 Getting Ready 2-3 Creating Printing Data 15 3. Create the PS (PostScript) le.  Select [Print] from the [File] menu. Select [Roland VW]. When a nickname is set, or when more than one printer is connected, select “Roland V W_(the nick - name of the printer used for output). ” Click [Setup]. Click [Continue] ...

  • Roland XR-640 - page 18

    2-3 Creating Printing Data Chapter 2 Getting Ready Chapter 2 Getting Ready 16  T urn on the [Print to le] option. Click [Preferences]. Click [Advanced] in the [Layout] tab. Click the down arrow to the right of the [Paper Size] box, and then click [PostScript Custom Page Size] from the list that ap - pears. For "Custom Page Size Dimension ...

  • Roland XR-640 - page 19

    Chapter 2 Getting Ready Chapter 2 Getting Ready 2-3 Creating Printing Data 17  Click [OK] three times to close the "PostScript Custom Page Size Denition," "Roland V ersaWorks Advanced Options," and "Printing Preferences" dialog boxes. The "Print" dialog bo x returns.  Click [Print]. Click [Print]. ? ...

  • Roland XR-640 - page 20

    2-3 Creating Printing Data Chapter 2 Getting Ready Chapter 2 Getting Ready 18 Blend Print and Layered Print (Metallic Silver and CMYKLcLmLk) *If equipped with both Metallic Silver ink and White ink, Lk (Light Black) ink is not used. Ignore "Lk" in this manual. The blend print and the layer print ar e printing methods in which the metallic ...

  • Roland XR-640 - page 21

    Chapter 2 Getting Ready Chapter 2 Getting Ready 2-3 Creating Printing Data 19 Layered Print (Image of printing method) The metallic silver ink and the CMYKLcLmLk ink are separated into the differ- ent layers and printed in that order . (Metallic silver ink  CMYKLcLmLk ink) Media Metallic Silver CMYKLcLmLk Metallic Silver CMYKLcLmLk The metallic ...

  • Roland XR-640 - page 22

    20 ...

  • Roland XR-640 - page 23

    Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver ................... 22 Printing Only with Metallic Silver Ink .......................................... 22 Blend Print (Metallic Silver + CMYKLcLm) ................................ 24 Layered Print (Metallic Silver  CMYKLcLm) ........................... 26 Layered Print ...

  • Roland XR-640 - page 24

    22 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver Printing Only with Metallic Silver Ink This section describes how to perform printing only with the metallic silver ink. T o use the metallic silver ink in printing, you need t o use the printing data where the use of the metallic silver ink is designa ...

  • Roland XR-640 - page 25

    23 Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver Chapter 3 Printing  Click . T urn on the [Convert Spot Color] option.  Click . In [Operation Mode], select the operation of the printer .  Click [OK] to close the "Queue A Proper - ties" window . This is the end of the print job setting. T o star t pri ...

  • Roland XR-640 - page 26

    24 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver Blend Print (Metallic Silver + CMYKLcLm) This section describes how to perform the blend print with the metallic silver ink and CMYKLcLm ink.  P . 18, “Blend Print and Layered Print (Metallic Silver and CMYKLcLmLk)” T o per f orm the blend print ...

  • Roland XR-640 - page 27

    25 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver  Click . For [Media T ype], select names with [MT] attached such as "Generic Vinyl 1 [MT]". Make the selection that matches the media to be used. Selecting an item attached with [MT ] enables you to choose the print mode that can use the m ...

  • Roland XR-640 - page 28

    26 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver Layered Print (Metallic Silver  CMYKLcLm) This section describes how to perform the layered print with the metallic silver ink and CMYKL cLm ink using the metallic silver ink as background .  P . 18, “ Blend Print and Layered Print (Metallic Si ...

  • Roland XR-640 - page 29

    27 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver  Click . For [Media T ype], select names with [MT] attached such as "Generic Vinyl 1 [MT]". Make the selection that matches the media to be used. Selecting an item attached with [MT ] enables you to choose the print mode that can use the m ...

  • Roland XR-640 - page 30

    28 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver Layered Print (CMYKLcLm  Metallic Silver) This section describes how to perform the layered print with the metallic silver ink and CMYKL cLm ink using the CMYKLcLm ink as backgr ound.  P . 18, “Blend Print and Layered Print (Metallic Silver and ...

  • Roland XR-640 - page 31

    29 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver  Click . For [Media T ype], select either "Generic Clear Film [MT]" or "xxx [MT] : PET Clear Film, Adhesive". * “xxx” indicates “SP-CL T ” and others.  For [Print Quality], select either [High Quality (Layered)] or [St ...

  • Roland XR-640 - page 32

    30 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver  Click [OK] to close the "Queue A Proper - ties" window . This is the end of the print job setting. T o star t printing , go on to page 53 “Starting the Print Operation. ” * Only the settings necessary for the use of the metallic silve ...

  • Roland XR-640 - page 33

    31 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver  Double-click . "Queue A Properties" window appears.  Click . In [Media T ype], select one from "Generic Clear Film," "Generic Clear Film [MT]," "xxx : PET Clear Film, Adhesive," and "xxx [MT]: PET Cle ...

  • Roland XR-640 - page 34

    32 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver  Click . In [Operation Mode], select the operation of the printer .  Click [OK] to close the "Queue A Proper - ties" window . This is the end of the print job setting. T o star t printing , go on to page 53 “Starting the Print Operati ...

  • Roland XR-640 - page 35

    33 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver  Click . For [Media T ype], select either "Generic Clear Film" or "xxx :PET Clear Film, Adhe - sive." * “xxx” indicates “SP-CL T ” and others.  For [Print Quality], select either [High Quality] or [Standard]. With [Mod ...

  • Roland XR-640 - page 36

    34 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver Image of overprinting in the sequence of CMYKLcLm Color and then white (Print Mode "CMYKL cLm -> W (v) ") * The white data and the CMYKL cLm color data are actually printed simultaneously , but they are shown here as separate lay ers in or ...

  • Roland XR-640 - page 37

    35 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver  Click [OK] to close the “Queue A Proper - ties” window . This is the end of the print job setting. T o star t printing , go on to page 53 “Starting the Print Operation. ” * Only the settings necessary for the use of the white ink are descri ...

  • Roland XR-640 - page 38

    36 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver  For [Print Quality], select either [High Quality] or [Standard]. With [Mode], select the print mode. W -> CMYKLcLmMt(v) Inks are overprinted in the sequence of whit e and then metallic silver/CMYKL cLm Color . CMYKLcLmMt -> W(v) Inks are over ...

  • Roland XR-640 - page 39

    37 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver Image of overprinting in the sequence of metallic silver/CMYKLcLm Color and then whit (Print Mode "CMYKL cLmMt -> W (v) ") * The white data and the metallic silv er/CMYKLcLm color data ar e actually printed simultaneously, but they are sho ...

  • Roland XR-640 - page 40

    38 Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver  Click [OK] to close the “Queue A Proper - ties” window . This is the end of the print job setting. T o star t printing , go on to page 53 “Starting the Print Operation. ” * Only the settings necessary for the use of the metallic silver ink and white ink are d ...

  • Roland XR-640 - page 41

    39 Chapter 3 Printing 3-2 Print Job Setting : Equipped w ith Silver Only Printing Only with Metallic Silver Ink This section describes how to perform printing only with the metallic silver ink. T o use the metallic silver ink in printing, you need t o use the printing data where the use of the metallic silver ink is designat ed. If the printing dat ...

  • Roland XR-640 - page 42

    40 Chapter 3 Printing Chapter 3 Printing 3-2 Print Job Setting : Equipped with Silver Only  Click . T urn on the [Convert Spot Color] option.  Click . In [Operation Mode], select the operation of the printer .  Click [OK] to close the "Queue A Proper - ties" window . This is the end of the print job setting. T o star t printing , ...

  • Roland XR-640 - page 43

    41 Chapter 3 Printing Chapter 3 Printing 3-2 Print Job Setting : Equipped with Silver Only Blend Print (Metallic Silver + CMYKLcLmLk) This section describes how to perform the blend print with the metallic silver ink and CMYKLcLmLk ink.  P . 18, “Blend Print and Layered Print (Metallic Silver and CMYKLcLmLk)” T o per f orm the blend print, y ...

  • Roland XR-640 - page 44

    42 Chapter 3 Printing Chapter 3 Printing 3-2 Print Job Setting : Equipped with Silver Only  Click . For [Media T ype], select names with [MT] attached such as "Generic Vinyl 1 [MT]". Make the selection that matches the media to be used. Selecting an item attached with [MT ] enables you to choose the print mode that can use the me - tal ...

  • Roland XR-640 - page 45

    43 Chapter 3 Printing Chapter 3 Printing 3-2 Print Job Setting : Equipped with Silver Only Layered Print (Metallic Silver  CMYKLcLmLk) This section describes how to perform the layered print with the metallic silver ink and CMYKL cLmLk ink using the metallic silver ink as background .  P . 18, “ Blend Print and Layered Print (Metallic Silve ...

  • Roland XR-640 - page 46

    44 Chapter 3 Printing Chapter 3 Printing 3-2 Print Job Setting : Equipped with Silver Only  Click . For [Media T ype], select names with [MT] attached such as "Generic Vinyl 1 [MT]". Make the selection that matches the media to be used. Selecting an item attached with [MT ] enables you to choose the print mode that can use the metallic ...

  • Roland XR-640 - page 47

    45 Chapter 3 Printing Chapter 3 Printing 3-2 Print Job Setting : Equipped with Silver Only Layered Print (CMYKLcLmLk  Metallic Silver) This section describes how to perform the layered print with the metallic silver ink and CMYKL cLmLk ink using the CMYKLcLmLk ink as backgr ound.  P . 18, “Blend Print and Layered Print (Metallic Silver and ...

  • Roland XR-640 - page 48

    46 Chapter 3 Printing Chapter 3 Printing 3-2 Print Job Setting : Equipped with Silver Only  Click . For [Media T ype], select "xxx :PET Clear Film, Adhesive [MT]". * “xxx” indicates “SP-CL T ” and others.  For [Print Quality], select either [High Quality (Layered)] or [Standard (Layered)]. For [Mode], select [CMYKLcLmLk (v)- ...

  • Roland XR-640 - page 49

    47 Chapter 3 Printing Chapter 3 Printing 3-2 Print Job Setting : Equipped with Silver Only  Click [OK] to close the "Queue A Proper - ties" window . This is the end of the print job setting. T o star t printing , go on to page 53 “Starting the Print Operation. ” * Only the settings necessary for the use of the metallic silver ink a ...

  • Roland XR-640 - page 50

    48 Chapter 3 Printing Chapter 3 Printing 3-3 Print Job Setting : Equipped with White Only Printing Only with White Ink This section describes how to perform printing only with the white ink. T o use the while ink in printing , you need to use the printing data where the use of the white ink is desig nated. If the printing data have the portion desi ...

  • Roland XR-640 - page 51

    49 Chapter 3 Printing 3-3 Print Job Setting : Equipped with White Only Chapter 3 Printing  Click . T urn on the [Convert Spot Color] option.  Click . In [Operation Mode], select the operation of the printer .  Click [OK] to close the "Queue A Proper - ties" window . This is the end of the print job setting. T o star t printing , ...

  • Roland XR-640 - page 52

    50 Chapter 3 Printing Chapter 3 Printing 3-3 Print Job Setting : Equipped with White Only Printing with White and CMYKLcLmLk Ink This section describes how to perform printing with the white ink and the CMYKLcLmLk ink. Deciding which ink between the white and the CMYKL cLmLk you want to use for the base is an important point in determin - ing the p ...

  • Roland XR-640 - page 53

    51 Chapter 3 Printing Chapter 3 Printing 3-3 Print Job Setting : Equipped with White Only Image of overprinting in the sequence of white and then CMYKLcLmLk Color (Print Mode "W -> CMYKLcLmLk (v) ") * The white data and the CMYKL cLmLk color data are actually printed simultaneously , but they are shown here as separate la yers in order ...

  • Roland XR-640 - page 54

    Chapter 3 Printing 52 Chapter 3 Printing 3-3 Print Job Setting : Equipped with White Only  Click . T urn on the [Convert Spot Color] option.  Click . In [Operation Mode], select the operation of the printer .  Click [OK] to close the “Queue A Proper - ties” window . This is the end of the print job setting. T o star t printing , go on ...

  • Roland XR-640 - page 55

    53 Chapter 3 Printing Chapter 3 Printing 3-4 Starting the Print Operation Starting the Print Operation F ollowing the print job setting, you can start the print operation. Procedure  Make settings for the print job.  P. 22, “3-1 Print Job Setting : Equipped with White & Silver ,” p. 39, “3-2 Print Job Setting : Equipped with Silver ...

  • Roland XR-640 - page 56

    54 Chapter 3 Printing Chapter 3 Printing 3-4 Starting the Print Operation  Select the print job in the job list, and then click . Printing will be started. Printing a Metallic Color Chart The Metallic Color Chart is the printing sample of the special metallic color . By pr inting the Metallic Color Chart, you can conrm the “ complete metall ...

  • Roland XR-640 - page 57

    55 Chapter 3 Printing Chapter 3 Printing 3-4 Starting the Print Operation  Click , congure the settings in [Qual - ity Settings] and [Color Management].  P. 22, “3-1 Print Job Setting : Equipped with White & Sil - ver ,” p. 39, “3-2 Print Job Setting : Equipped with Silver Only” Click [OK].  Click [Media] and then [Metallic ...

  • Roland XR-640 - page 58

    56 ...

  • Roland XR-640 - page 59

    Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver .................... 58 Pullback printing (White  Metallic silver/CMYKLclm) .............. 58 Pullback printing (Metallic silver/CMYKLcLm  White) ............. 64 4-2 Performing T exture Printing: Equipped with Silver ................. 70 What is T exture Printing? ... ...

  • Roland XR-640 - page 60

    58 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver Pullback printing (White  Metallic silver/CMYKLcLm) This section describes how to perform printing in the sequence of white and then metallic silver/CMYKL cLm - color . After per forming printing using white ink and allo wing the ink to dry for a pre ...

  • Roland XR-640 - page 61

    59 Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver Chapter 4 Advanced  Click . For [Media T ype], select either "Generic Clear Film [MT]" or "xxx :PET Clear Film, Adhesive [MT]". * “xxx” indicates “SP-CL T ” and others.  For [Print Quality], select either [High Quality] or [Standard]. Wit ...

  • Roland XR-640 - page 62

    60 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver  Click . In [Operation Mode], select the operation of the printer . T urn on the [Return to Origin After Print] option. NOTE: This section only described the settings that are necessary for the use of the white ink. For other set - tings, ref er to t ...

  • Roland XR-640 - page 63

    61 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver The contents of the da ta are displayed in the pr eview window , and the layout on the media is display ed in the layout window .  Select the print job in the job list, then click . Printing will be started. After printing and dry time, the media is ...

  • Roland XR-640 - page 64

    62 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver 2. Printing With Metallic Silver/CMYKLcLm Color  Double-click the print job that was used in the step 1. The “ Job Setting” window appears.  < When performing blend print with metallic silver / CMYKLcLm > Click . For [Print Quality], sel ...

  • Roland XR-640 - page 65

    63 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver  Click . With [Other Controls], select "Use De - fault Media Settings."  Click . T urn off the [Return to Origin After Print] option.  Click [OK] to close the “Job Setting” win - dow .  Select the print job in the job list, the ...

  • Roland XR-640 - page 66

    64 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver Pullback printing (Metallic silver/CMYKLcLm  White) This section describes how to perform printing in the sequence of metallic silver/CMYKLcLm C olor and then white. After performing printing using metallic silver and CMYKL cLm ink and allowing the i ...

  • Roland XR-640 - page 67

    65 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver  < When performing blend print with metallic silver / CMYKLcLm > Click . For [Media T ype], select either "Generic Clear Film [MT]" or "xxx :PET Clear Film, Adhesive [MT]". * “xxx” indicates “SP-CL T ” and others. Fo ...

  • Roland XR-640 - page 68

    66 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver  Click . T urn on the [Convert Spot Color] option.  Click . With [Other Controls], select “User Cus - tom Settings.” For [Dry Time], select “15 minutes.” This is a suggested setting for when using an auxiliary drying unit (DU ser ies).  ...

  • Roland XR-640 - page 69

    67 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver  Click [OK] to close the "Queue A Proper - ties" window .  Go to “Job List” and click the “Queue A” tab, and drag the printing data to the queue A job list. The contents of the da ta are displayed in the pr eview window , and the ...

  • Roland XR-640 - page 70

    68 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver 2. Printing With White Ink Only  Double-click the print job that was used in the step 1. The “ Job Setting” window appears.  Click . For [Print Quality], select either [High Quality] or [Standard]. With [Mode], select the print mode “White ( ...

  • Roland XR-640 - page 71

    69 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver  Click . T urn off the [Return to Origin After Print] option.  Click [OK] to close the "Job Settings" window .  Select the print job in the job list, then click . Printing will be started. After printing, allow the ink t o dr y suc ...

  • Roland XR-640 - page 72

    70 Chapter 4 Advanced Chapter 4 Advanced 4-2 Performing T exture Printing: Equipped w ith Silver What is T exture Printing? T exture printing is a printing method to produce t exture patterns. This uses the texture patterns of the ex - clusive library to create and output the printing data. This document describes the texture printing using metalli ...

  • Roland XR-640 - page 73

    71 Chapter 4 Advanced 4-2 Performing T exture Printing: Equipped with Silver Chapter 4 Advanced  Open folder in the order of [Computer] (or [My Computer]) → [Local Disk (C:)] →[Pro - gram Files] → [Roland V ersaWorks] → [Swatch] → [Illustrator], and then select Roland Metallic T exture System Library .ai. Depending on the settings of y ...

  • Roland XR-640 - page 74

    72 Chapter 4 Advanced Chapter 4 Advanced 4-2 Performing T exture Printing: Equipped with Silver 2. Create Illustrations and Specify T exture Patterns Y ou Wish to Use  Create the illustration. Be sure to draw the illustr ation in the CMYK mode.  Assign the desired texture patterns to the areas for the texture printing. The areas where the t e ...

  • Roland XR-640 - page 75

    73 Chapter 4 Advanced Chapter 4 Advanced 4-2 Performing T exture Printing: Equipped with Silver Performing T exture Printing Procedure  'Prepare the printing data having been created in the previous process which is de - scribed in “Create The T exture Printing Data” on page 70.  Make the setting to output metallic silver ink with th ...

  • Roland XR-640 - page 76

    Chapter 4 Advanced 74 Chapter 4 Advanced 4-2 Performing T exture Printing: Equipped with Silver  Click [Chart] under [Print Roland T exture System Library] form the [Media] menu. This message appears: The foll owing job will be printed. Do you wan t to continue? Check that the media in the printer is large enough for the displa yed page size. Cl ...

  • Roland XR-640 - page 77

    75 Chapter 4 Advanced Chapter 4 Advanced 4-3 Maintenance When Dot Drop-out Etc. Cannot be Corrected When using metallic silver ink and white ink, ink discharge may bec ome unstable (resulting in dot drop-out, etc.) if the machine is left unattended f or a long period. This is due to the properties of metallic silver ink and white ink containing ing ...

  • Roland XR-640 - page 78

    76 ...

  • Roland XR-640 - page 79

    ...

  • Roland XR-640 - page 80

    R2-121 1 16 ...

Fabricante Roland Categoría Printer

Los documentos del dispositivo Roland XR-640 que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Roland
- manuales de instrucciones XR-640
- hojas de producto Roland
- folletos informativos
- o etiquetas energéticas Roland XR-640
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Roland XR-640.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Roland XR-640, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Roland XR-640. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Roland XR-640.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Roland XR-640, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Roland XR-640. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Roland XR-640.

El manual de instrucciones completo de Roland debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Roland XR-640 - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Roland XR-640, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Roland XR-640 que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Roland XR-640 - que deben facilitarnos los primeros pasos durante el uso de Roland XR-640
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Roland XR-640
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Roland XR-640 en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Roland XR-640?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Roland XR-640, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Roland XR-640 probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)