English dropdown-ico

Manual Roland XR-640

80 pages Not applicable
Download

Go to site of 80

Summary
  • Roland XR-640 - page 1

    This document describes the characteristics of special color inks (white ink and metallic silver ink) used with SOLJET PRO 4 series printers, important notes, maintenance , and printing method using these inks. F or other matters, r efer to Setup Guide and User's Manual of your printer . When you use metallic silver ink and white ink, be sure ...

  • Roland XR-640 - page 2

    Thank you very much for purchasing this product.  T o ensure correct and saf e usage with a full understanding of this product's performance, please be sure t o read through this manual completely and store it in a saf e location.  Unauthorized copying or transf eral, in whole or in part, of this manual is prohibited.  The contents of ...

  • Roland XR-640 - page 3

    1 Contents Contents ........................................................................................................ 1 Chapter 1 Getting Started ................................................................................... 3 1-1 What This Document Assumes and Related Manuals ............................ 4 What This Document Assumes .. ...

  • Roland XR-640 - page 4

    Contents 2 http://www.r olanddg.com/ Copyright © 2012 Roland DG Corporation Chapter 4 Advanced .......................................................................................... 57 4-1 Pullback printing: Equipped with White & Silver ................................... 58 Pullback printing ( White  Metallic silver/CMY KLcLm) ........ ...

  • Roland XR-640 - page 5

    Chapter 1 Getting Started 1-1 What This Document Assumes and Related Manuals ............. 4 What This Document Assumes ................................................... 4 Related Manuals .......................................................................... 4 V ersaWorks Online ................................................................ ...

  • Roland XR-640 - page 6

    4 Chapter 1 Getting Started Chapter 1 Getting Started 1-1 What This Document Assumes and Related Manuals What This Document Assumes Before performing any operations described in this guide , make sure that all the following pr eparations have been complete.  Hardware setup , such as the assembly and installation of SOL JET PRO4 series printer (h ...

  • Roland XR-640 - page 7

    5 Chapter 1 Getting Started Chapter 1 Getting Started 1-2 Before Starting Operations *If equipped with both Metallic Silver ink and White ink, Lk (Light Black) ink is not used. Ignore "Lk" in this manual. Important: Characteristics of Inks and Important Notes The usage and handling of white ink and metallic silver ink in volve some import ...

  • Roland XR-640 - page 8

    Chapter 1 Getting Started 6 Chapter 1 Getting Started 1-3 Important Notes on Printing *If equipped with both Metallic Silver ink and White ink, Lk (Light Black) ink is not used. Ignore "Lk" in this manual. Using the Middle Pinch Rollers in Printing and Cutting Since metallic silver ink and white ink ar e dicult to dry, the middle pinch ...

  • Roland XR-640 - page 9

    Chapter 1 Getting Started 1-3 Important Notes on Printing Chapter 1 Getting Started 7 Important Notes in Using T ransparent Media Loading T ransparent Media  Set the [EDGE DETEC TION] menu item to "DISABLE" . T ransparent media cannot be loaded unless this set- ting is made.  Ensure a margin of at least 75 mm from the leading edge o ...

  • Roland XR-640 - page 10

    8 ...

  • Roland XR-640 - page 11

    Chapter 2 Getting Ready 2-1 Preparing V ersaWorks ........................................................... 10 Starting V ersaWorks .................................................................. 10 Creating a Folder for Saving PS Files ....................................... 10 2-2 Printer Preparations ........................................ ...

  • Roland XR-640 - page 12

    10 Chapter 2 Getting Ready Chapter 2 Getting Ready 2-1 Preparing V ersaWorks Starting V ersaWorks On the computer you ar e using, start V ersaWorks. F or information on how to start the program, see the Roland V ersaW orks Quick Star t Guide. After starting the program, go to the upper left of the main screen and check t o make sure that "Mode ...

  • Roland XR-640 - page 13

    11 Chapter 2 Getting Ready Chapter 2 Getting Ready 2-2 Printer Preparations Making the Printer Settings and Loading Media When Using T ransparent Media When you're using tr ansparent media, make the necessary printing settings on the printer and load the media accordingly . Procedure  In the menu of the printer , set [EDGE DETECTION] to &qu ...

  • Roland XR-640 - page 14

    Chapter 2 Getting Ready 12 Chapter 2 Getting Ready 2-3 Creating Printing Data Basic Approach for Creating Printing Data When Using Metallic Silver Ink Y ou can create the printing da ta according to the two methods belo w .  Specify the spot color so as to use only the metallic silver ink. Apply the spot color named "RDG_MetallicSilver" ...

  • Roland XR-640 - page 15

    Chapter 2 Getting Ready 2-3 Creating Printing Data Chapter 2 Getting Ready 13  Open folders in the order of [Computer] (or [My Computer]) → [OS (C:) ( or [Local Disk (C:)]) ] → [Program Files] → [Roland V ersaWorks] → [Swatch] → [Illustrator], then select "Roland V ersaWorks.ai" Depending on the settings of your computer , th ...

  • Roland XR-640 - page 16

    2-3 Creating Printing Data Chapter 2 Getting Ready Chapter 2 Getting Ready 14 2. Create the illustration, and specify the spot color that matches the color you want to print.  Create the illustration. Be sure to draw the illustr ation in the CMYK mode.  Specify each spot color that matches the color you want to print. Desired ink or color Spo ...

  • Roland XR-640 - page 17

    Chapter 2 Getting Ready Chapter 2 Getting Ready 2-3 Creating Printing Data 15 3. Create the PS (PostScript) le.  Select [Print] from the [File] menu. Select [Roland VW]. When a nickname is set, or when more than one printer is connected, select “Roland V W_(the nick - name of the printer used for output). ” Click [Setup]. Click [Continue] ...

  • Roland XR-640 - page 18

    2-3 Creating Printing Data Chapter 2 Getting Ready Chapter 2 Getting Ready 16  T urn on the [Print to le] option. Click [Preferences]. Click [Advanced] in the [Layout] tab. Click the down arrow to the right of the [Paper Size] box, and then click [PostScript Custom Page Size] from the list that ap - pears. For "Custom Page Size Dimension ...

  • Roland XR-640 - page 19

    Chapter 2 Getting Ready Chapter 2 Getting Ready 2-3 Creating Printing Data 17  Click [OK] three times to close the "PostScript Custom Page Size Denition," "Roland V ersaWorks Advanced Options," and "Printing Preferences" dialog boxes. The "Print" dialog bo x returns.  Click [Print]. Click [Print]. ? ...

  • Roland XR-640 - page 20

    2-3 Creating Printing Data Chapter 2 Getting Ready Chapter 2 Getting Ready 18 Blend Print and Layered Print (Metallic Silver and CMYKLcLmLk) *If equipped with both Metallic Silver ink and White ink, Lk (Light Black) ink is not used. Ignore "Lk" in this manual. The blend print and the layer print ar e printing methods in which the metallic ...

  • Roland XR-640 - page 21

    Chapter 2 Getting Ready Chapter 2 Getting Ready 2-3 Creating Printing Data 19 Layered Print (Image of printing method) The metallic silver ink and the CMYKLcLmLk ink are separated into the differ- ent layers and printed in that order . (Metallic silver ink  CMYKLcLmLk ink) Media Metallic Silver CMYKLcLmLk Metallic Silver CMYKLcLmLk The metallic ...

  • Roland XR-640 - page 22

    20 ...

  • Roland XR-640 - page 23

    Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver ................... 22 Printing Only with Metallic Silver Ink .......................................... 22 Blend Print (Metallic Silver + CMYKLcLm) ................................ 24 Layered Print (Metallic Silver  CMYKLcLm) ........................... 26 Layered Print ...

  • Roland XR-640 - page 24

    22 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver Printing Only with Metallic Silver Ink This section describes how to perform printing only with the metallic silver ink. T o use the metallic silver ink in printing, you need t o use the printing data where the use of the metallic silver ink is designa ...

  • Roland XR-640 - page 25

    23 Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver Chapter 3 Printing  Click . T urn on the [Convert Spot Color] option.  Click . In [Operation Mode], select the operation of the printer .  Click [OK] to close the "Queue A Proper - ties" window . This is the end of the print job setting. T o star t pri ...

  • Roland XR-640 - page 26

    24 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver Blend Print (Metallic Silver + CMYKLcLm) This section describes how to perform the blend print with the metallic silver ink and CMYKLcLm ink.  P . 18, “Blend Print and Layered Print (Metallic Silver and CMYKLcLmLk)” T o per f orm the blend print ...

  • Roland XR-640 - page 27

    25 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver  Click . For [Media T ype], select names with [MT] attached such as "Generic Vinyl 1 [MT]". Make the selection that matches the media to be used. Selecting an item attached with [MT ] enables you to choose the print mode that can use the m ...

  • Roland XR-640 - page 28

    26 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver Layered Print (Metallic Silver  CMYKLcLm) This section describes how to perform the layered print with the metallic silver ink and CMYKL cLm ink using the metallic silver ink as background .  P . 18, “ Blend Print and Layered Print (Metallic Si ...

  • Roland XR-640 - page 29

    27 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver  Click . For [Media T ype], select names with [MT] attached such as "Generic Vinyl 1 [MT]". Make the selection that matches the media to be used. Selecting an item attached with [MT ] enables you to choose the print mode that can use the m ...

  • Roland XR-640 - page 30

    28 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver Layered Print (CMYKLcLm  Metallic Silver) This section describes how to perform the layered print with the metallic silver ink and CMYKL cLm ink using the CMYKLcLm ink as backgr ound.  P . 18, “Blend Print and Layered Print (Metallic Silver and ...

  • Roland XR-640 - page 31

    29 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver  Click . For [Media T ype], select either "Generic Clear Film [MT]" or "xxx [MT] : PET Clear Film, Adhesive". * “xxx” indicates “SP-CL T ” and others.  For [Print Quality], select either [High Quality (Layered)] or [St ...

  • Roland XR-640 - page 32

    30 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver  Click [OK] to close the "Queue A Proper - ties" window . This is the end of the print job setting. T o star t printing , go on to page 53 “Starting the Print Operation. ” * Only the settings necessary for the use of the metallic silve ...

  • Roland XR-640 - page 33

    31 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver  Double-click . "Queue A Properties" window appears.  Click . In [Media T ype], select one from "Generic Clear Film," "Generic Clear Film [MT]," "xxx : PET Clear Film, Adhesive," and "xxx [MT]: PET Cle ...

  • Roland XR-640 - page 34

    32 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver  Click . In [Operation Mode], select the operation of the printer .  Click [OK] to close the "Queue A Proper - ties" window . This is the end of the print job setting. T o star t printing , go on to page 53 “Starting the Print Operati ...

  • Roland XR-640 - page 35

    33 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver  Click . For [Media T ype], select either "Generic Clear Film" or "xxx :PET Clear Film, Adhe - sive." * “xxx” indicates “SP-CL T ” and others.  For [Print Quality], select either [High Quality] or [Standard]. With [Mod ...

  • Roland XR-640 - page 36

    34 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver Image of overprinting in the sequence of CMYKLcLm Color and then white (Print Mode "CMYKL cLm -> W (v) ") * The white data and the CMYKL cLm color data are actually printed simultaneously , but they are shown here as separate lay ers in or ...

  • Roland XR-640 - page 37

    35 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver  Click [OK] to close the “Queue A Proper - ties” window . This is the end of the print job setting. T o star t printing , go on to page 53 “Starting the Print Operation. ” * Only the settings necessary for the use of the white ink are descri ...

  • Roland XR-640 - page 38

    36 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver  For [Print Quality], select either [High Quality] or [Standard]. With [Mode], select the print mode. W -> CMYKLcLmMt(v) Inks are overprinted in the sequence of whit e and then metallic silver/CMYKL cLm Color . CMYKLcLmMt -> W(v) Inks are over ...

  • Roland XR-640 - page 39

    37 Chapter 3 Printing Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver Image of overprinting in the sequence of metallic silver/CMYKLcLm Color and then whit (Print Mode "CMYKL cLmMt -> W (v) ") * The white data and the metallic silv er/CMYKLcLm color data ar e actually printed simultaneously, but they are sho ...

  • Roland XR-640 - page 40

    38 Chapter 3 Printing 3-1 Print Job Setting : Equipped with White & Silver  Click [OK] to close the “Queue A Proper - ties” window . This is the end of the print job setting. T o star t printing , go on to page 53 “Starting the Print Operation. ” * Only the settings necessary for the use of the metallic silver ink and white ink are d ...

  • Roland XR-640 - page 41

    39 Chapter 3 Printing 3-2 Print Job Setting : Equipped w ith Silver Only Printing Only with Metallic Silver Ink This section describes how to perform printing only with the metallic silver ink. T o use the metallic silver ink in printing, you need t o use the printing data where the use of the metallic silver ink is designat ed. If the printing dat ...

  • Roland XR-640 - page 42

    40 Chapter 3 Printing Chapter 3 Printing 3-2 Print Job Setting : Equipped with Silver Only  Click . T urn on the [Convert Spot Color] option.  Click . In [Operation Mode], select the operation of the printer .  Click [OK] to close the "Queue A Proper - ties" window . This is the end of the print job setting. T o star t printing , ...

  • Roland XR-640 - page 43

    41 Chapter 3 Printing Chapter 3 Printing 3-2 Print Job Setting : Equipped with Silver Only Blend Print (Metallic Silver + CMYKLcLmLk) This section describes how to perform the blend print with the metallic silver ink and CMYKLcLmLk ink.  P . 18, “Blend Print and Layered Print (Metallic Silver and CMYKLcLmLk)” T o per f orm the blend print, y ...

  • Roland XR-640 - page 44

    42 Chapter 3 Printing Chapter 3 Printing 3-2 Print Job Setting : Equipped with Silver Only  Click . For [Media T ype], select names with [MT] attached such as "Generic Vinyl 1 [MT]". Make the selection that matches the media to be used. Selecting an item attached with [MT ] enables you to choose the print mode that can use the me - tal ...

  • Roland XR-640 - page 45

    43 Chapter 3 Printing Chapter 3 Printing 3-2 Print Job Setting : Equipped with Silver Only Layered Print (Metallic Silver  CMYKLcLmLk) This section describes how to perform the layered print with the metallic silver ink and CMYKL cLmLk ink using the metallic silver ink as background .  P . 18, “ Blend Print and Layered Print (Metallic Silve ...

  • Roland XR-640 - page 46

    44 Chapter 3 Printing Chapter 3 Printing 3-2 Print Job Setting : Equipped with Silver Only  Click . For [Media T ype], select names with [MT] attached such as "Generic Vinyl 1 [MT]". Make the selection that matches the media to be used. Selecting an item attached with [MT ] enables you to choose the print mode that can use the metallic ...

  • Roland XR-640 - page 47

    45 Chapter 3 Printing Chapter 3 Printing 3-2 Print Job Setting : Equipped with Silver Only Layered Print (CMYKLcLmLk  Metallic Silver) This section describes how to perform the layered print with the metallic silver ink and CMYKL cLmLk ink using the CMYKLcLmLk ink as backgr ound.  P . 18, “Blend Print and Layered Print (Metallic Silver and ...

  • Roland XR-640 - page 48

    46 Chapter 3 Printing Chapter 3 Printing 3-2 Print Job Setting : Equipped with Silver Only  Click . For [Media T ype], select "xxx :PET Clear Film, Adhesive [MT]". * “xxx” indicates “SP-CL T ” and others.  For [Print Quality], select either [High Quality (Layered)] or [Standard (Layered)]. For [Mode], select [CMYKLcLmLk (v)- ...

  • Roland XR-640 - page 49

    47 Chapter 3 Printing Chapter 3 Printing 3-2 Print Job Setting : Equipped with Silver Only  Click [OK] to close the "Queue A Proper - ties" window . This is the end of the print job setting. T o star t printing , go on to page 53 “Starting the Print Operation. ” * Only the settings necessary for the use of the metallic silver ink a ...

  • Roland XR-640 - page 50

    48 Chapter 3 Printing Chapter 3 Printing 3-3 Print Job Setting : Equipped with White Only Printing Only with White Ink This section describes how to perform printing only with the white ink. T o use the while ink in printing , you need to use the printing data where the use of the white ink is desig nated. If the printing data have the portion desi ...

  • Roland XR-640 - page 51

    49 Chapter 3 Printing 3-3 Print Job Setting : Equipped with White Only Chapter 3 Printing  Click . T urn on the [Convert Spot Color] option.  Click . In [Operation Mode], select the operation of the printer .  Click [OK] to close the "Queue A Proper - ties" window . This is the end of the print job setting. T o star t printing , ...

  • Roland XR-640 - page 52

    50 Chapter 3 Printing Chapter 3 Printing 3-3 Print Job Setting : Equipped with White Only Printing with White and CMYKLcLmLk Ink This section describes how to perform printing with the white ink and the CMYKLcLmLk ink. Deciding which ink between the white and the CMYKL cLmLk you want to use for the base is an important point in determin - ing the p ...

  • Roland XR-640 - page 53

    51 Chapter 3 Printing Chapter 3 Printing 3-3 Print Job Setting : Equipped with White Only Image of overprinting in the sequence of white and then CMYKLcLmLk Color (Print Mode "W -> CMYKLcLmLk (v) ") * The white data and the CMYKL cLmLk color data are actually printed simultaneously , but they are shown here as separate la yers in order ...

  • Roland XR-640 - page 54

    Chapter 3 Printing 52 Chapter 3 Printing 3-3 Print Job Setting : Equipped with White Only  Click . T urn on the [Convert Spot Color] option.  Click . In [Operation Mode], select the operation of the printer .  Click [OK] to close the “Queue A Proper - ties” window . This is the end of the print job setting. T o star t printing , go on ...

  • Roland XR-640 - page 55

    53 Chapter 3 Printing Chapter 3 Printing 3-4 Starting the Print Operation Starting the Print Operation F ollowing the print job setting, you can start the print operation. Procedure  Make settings for the print job.  P. 22, “3-1 Print Job Setting : Equipped with White & Silver ,” p. 39, “3-2 Print Job Setting : Equipped with Silver ...

  • Roland XR-640 - page 56

    54 Chapter 3 Printing Chapter 3 Printing 3-4 Starting the Print Operation  Select the print job in the job list, and then click . Printing will be started. Printing a Metallic Color Chart The Metallic Color Chart is the printing sample of the special metallic color . By pr inting the Metallic Color Chart, you can conrm the “ complete metall ...

  • Roland XR-640 - page 57

    55 Chapter 3 Printing Chapter 3 Printing 3-4 Starting the Print Operation  Click , congure the settings in [Qual - ity Settings] and [Color Management].  P. 22, “3-1 Print Job Setting : Equipped with White & Sil - ver ,” p. 39, “3-2 Print Job Setting : Equipped with Silver Only” Click [OK].  Click [Media] and then [Metallic ...

  • Roland XR-640 - page 58

    56 ...

  • Roland XR-640 - page 59

    Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver .................... 58 Pullback printing (White  Metallic silver/CMYKLclm) .............. 58 Pullback printing (Metallic silver/CMYKLcLm  White) ............. 64 4-2 Performing T exture Printing: Equipped with Silver ................. 70 What is T exture Printing? ... ...

  • Roland XR-640 - page 60

    58 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver Pullback printing (White  Metallic silver/CMYKLcLm) This section describes how to perform printing in the sequence of white and then metallic silver/CMYKL cLm - color . After per forming printing using white ink and allo wing the ink to dry for a pre ...

  • Roland XR-640 - page 61

    59 Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver Chapter 4 Advanced  Click . For [Media T ype], select either "Generic Clear Film [MT]" or "xxx :PET Clear Film, Adhesive [MT]". * “xxx” indicates “SP-CL T ” and others.  For [Print Quality], select either [High Quality] or [Standard]. Wit ...

  • Roland XR-640 - page 62

    60 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver  Click . In [Operation Mode], select the operation of the printer . T urn on the [Return to Origin After Print] option. NOTE: This section only described the settings that are necessary for the use of the white ink. For other set - tings, ref er to t ...

  • Roland XR-640 - page 63

    61 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver The contents of the da ta are displayed in the pr eview window , and the layout on the media is display ed in the layout window .  Select the print job in the job list, then click . Printing will be started. After printing and dry time, the media is ...

  • Roland XR-640 - page 64

    62 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver 2. Printing With Metallic Silver/CMYKLcLm Color  Double-click the print job that was used in the step 1. The “ Job Setting” window appears.  < When performing blend print with metallic silver / CMYKLcLm > Click . For [Print Quality], sel ...

  • Roland XR-640 - page 65

    63 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver  Click . With [Other Controls], select "Use De - fault Media Settings."  Click . T urn off the [Return to Origin After Print] option.  Click [OK] to close the “Job Setting” win - dow .  Select the print job in the job list, the ...

  • Roland XR-640 - page 66

    64 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver Pullback printing (Metallic silver/CMYKLcLm  White) This section describes how to perform printing in the sequence of metallic silver/CMYKLcLm C olor and then white. After performing printing using metallic silver and CMYKL cLm ink and allowing the i ...

  • Roland XR-640 - page 67

    65 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver  < When performing blend print with metallic silver / CMYKLcLm > Click . For [Media T ype], select either "Generic Clear Film [MT]" or "xxx :PET Clear Film, Adhesive [MT]". * “xxx” indicates “SP-CL T ” and others. Fo ...

  • Roland XR-640 - page 68

    66 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver  Click . T urn on the [Convert Spot Color] option.  Click . With [Other Controls], select “User Cus - tom Settings.” For [Dry Time], select “15 minutes.” This is a suggested setting for when using an auxiliary drying unit (DU ser ies).  ...

  • Roland XR-640 - page 69

    67 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver  Click [OK] to close the "Queue A Proper - ties" window .  Go to “Job List” and click the “Queue A” tab, and drag the printing data to the queue A job list. The contents of the da ta are displayed in the pr eview window , and the ...

  • Roland XR-640 - page 70

    68 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver 2. Printing With White Ink Only  Double-click the print job that was used in the step 1. The “ Job Setting” window appears.  Click . For [Print Quality], select either [High Quality] or [Standard]. With [Mode], select the print mode “White ( ...

  • Roland XR-640 - page 71

    69 Chapter 4 Advanced Chapter 4 Advanced 4-1 Pullback printing: Equipped with White & Silver  Click . T urn off the [Return to Origin After Print] option.  Click [OK] to close the "Job Settings" window .  Select the print job in the job list, then click . Printing will be started. After printing, allow the ink t o dr y suc ...

  • Roland XR-640 - page 72

    70 Chapter 4 Advanced Chapter 4 Advanced 4-2 Performing T exture Printing: Equipped w ith Silver What is T exture Printing? T exture printing is a printing method to produce t exture patterns. This uses the texture patterns of the ex - clusive library to create and output the printing data. This document describes the texture printing using metalli ...

  • Roland XR-640 - page 73

    71 Chapter 4 Advanced 4-2 Performing T exture Printing: Equipped with Silver Chapter 4 Advanced  Open folder in the order of [Computer] (or [My Computer]) → [Local Disk (C:)] →[Pro - gram Files] → [Roland V ersaWorks] → [Swatch] → [Illustrator], and then select Roland Metallic T exture System Library .ai. Depending on the settings of y ...

  • Roland XR-640 - page 74

    72 Chapter 4 Advanced Chapter 4 Advanced 4-2 Performing T exture Printing: Equipped with Silver 2. Create Illustrations and Specify T exture Patterns Y ou Wish to Use  Create the illustration. Be sure to draw the illustr ation in the CMYK mode.  Assign the desired texture patterns to the areas for the texture printing. The areas where the t e ...

  • Roland XR-640 - page 75

    73 Chapter 4 Advanced Chapter 4 Advanced 4-2 Performing T exture Printing: Equipped with Silver Performing T exture Printing Procedure  'Prepare the printing data having been created in the previous process which is de - scribed in “Create The T exture Printing Data” on page 70.  Make the setting to output metallic silver ink with th ...

  • Roland XR-640 - page 76

    Chapter 4 Advanced 74 Chapter 4 Advanced 4-2 Performing T exture Printing: Equipped with Silver  Click [Chart] under [Print Roland T exture System Library] form the [Media] menu. This message appears: The foll owing job will be printed. Do you wan t to continue? Check that the media in the printer is large enough for the displa yed page size. Cl ...

  • Roland XR-640 - page 77

    75 Chapter 4 Advanced Chapter 4 Advanced 4-3 Maintenance When Dot Drop-out Etc. Cannot be Corrected When using metallic silver ink and white ink, ink discharge may bec ome unstable (resulting in dot drop-out, etc.) if the machine is left unattended f or a long period. This is due to the properties of metallic silver ink and white ink containing ing ...

  • Roland XR-640 - page 78

    76 ...

  • Roland XR-640 - page 79

    ...

  • Roland XR-640 - page 80

    R2-121 1 16 ...

Manufacturer Roland Category Printer

Documents that we receive from a manufacturer of a Roland XR-640 can be divided into several groups. They are, among others:
- Roland technical drawings
- XR-640 manuals
- Roland product data sheets
- information booklets
- or energy labels Roland XR-640
All of them are important, but the most important information from the point of view of use of the device are in the user manual Roland XR-640.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Roland XR-640, service manual, brief instructions and user manuals Roland XR-640. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Roland XR-640.

Similar manuals

A complete manual for the device Roland XR-640, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Roland XR-640 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Roland XR-640.

A complete Roland manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Roland XR-640 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Roland XR-640, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Roland XR-640, that we can find in the current document
3. Tips how to use the basic functions of the device Roland XR-640 - which should help us in our first steps of using Roland XR-640
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Roland XR-640
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Roland XR-640 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Roland XR-640?

Use the form below

If you did not solve your problem by using a manual Roland XR-640, ask a question using the form below. If a user had a similar problem with Roland XR-640 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)