Manual de instrucciones Snapper ESV25650B

16 de páginas 0.6 mb
Descargar

Pasar a la página of 16

Summary
  • Snapper ESV25650B - page 1

    Safety Instructions & Operator’s Manual for EUROPEAN PUSH YARD VACUUM SERIES 0 Model Mfg. No. ESV25650B 7085913 Before operating your new machine, read this manual caref ully and pay particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 & 3. Remember that all pow er equipment can be dangerous if used improperly. Also ...

  • Snapper ESV25650B - page 2

    IMPORTANT SAFETY INSTRUCTIONS WARNING: This pow erful machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the follow ing SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions ...

  • Snapper ESV25650B - page 3

    IMPORTANT SAFETY INSTRUCTIONS SAFE HANDLING OF GASOLINE (Continued From Previous Page) 3. DO NOT remove fuel cap or add fuel with the engine running. Allow the engine to cool before refueling. 4. DO NOT refuel the machine indoors. 5. DO NOT store the machine or fuel container inside w here there is an open flame, spark or pilot light such as on a w ...

  • Snapper ESV25650B - page 4

    4 TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIO NS ........................................................................ 2-3 TABLE OF CO NTENTS ..................................................................................................... 4 SETUP INST RUCTIONS ............................................................................... ...

  • Snapper ESV25650B - page 5

    5 SETUP INSTRUCTIONS The majority of the assembly has been co mpleted at the factory. After removing the machine from the shipping container you will be required to unfold the handles, attach the debris bag, and insert the accessory plug into the vacuum nozzle. Initial adjustments and operational tests were performed prior to shipping the machine. ...

  • Snapper ESV25650B - page 6

    6 Section 1 – FAMILIARIZATION FIGURE 1.1 1.1 INTRODUCTION This manual has been prepared for the operator’s of the Yard Vacuum. Its purpose, aside from recommending standard operating procedures and routine service requirements, is to promote SAFETY through the use of accepted operating practices. Read, Understand and Follow the IMPORTANT SAFETY ...

  • Snapper ESV25650B - page 7

    7 Section 1 – FAMILIARIZATION 1.3 SAFETY AND INSTRUCTION LABELS The safety and instruction labels included with your Yard Vacuum are very important. Read, understand and follow all instructions and warnings. Keep these labels clean and legible at all times. Replace any labels that are lost or can no longer be read. WARNING – HEARING, EYE AND BR ...

  • Snapper ESV25650B - page 8

    8 Section 2 – OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST Read, understand and follow instructions and warnings in this manual and on the machine, engine and attachments before operating. Know the controls and the proper use of the machine before starting. Make the following checks and perform the service required before each start-up. 2.1.1. ...

  • Snapper ESV25650B - page 9

    9 Section 2 – OPERATING INSTRUCTIONS WARNING Entire debris bag and bag adapter must be properly installed before starting engine. The debris bag and bag adapter are subject to deterioration during normal use. Inspect frequently and replace if signs of deterioration are observed. 2.2 STARTING, STOPPING & OPERATION 2.2.1. STARTING ENGINE Before ...

  • Snapper ESV25650B - page 10

    10 Section 3 – MAINTENANCE WARNING DO NOT attempt any adjustments, maintenance, service or repairs w ith the engine running. STOP engine. Remove spark plug wire from spark plug and secure aw ay from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before w orking on machine. 3.1 INTRODUCTION To retain the quality ...

  • Snapper ESV25650B - page 11

    11 Section 4 - ADJUSTMENTS & REPAIR WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Remove spark plug wire from spark plug and secure aw ay from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before w orking on machine. 4.1 ENGINE ADJUSTMENTS & ...

  • Snapper ESV25650B - page 12

    12 TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Engine Will Not 1. F ue l ta nk e mp ty . 1. Fill fuel tank with fresh fuel to proper level. Start Using 2. Engine needs choking or priming. 2. Move control to “CHOKE”, press primer. Recoil Starter 3. Spark plug wire disconnected. 3. Pl ace spark plug wire onto spark plug. 4. Fuel valv ...

  • Snapper ESV25650B - page 13

    13 MAINTENANCE SCHEDULE SUBJECT SERVICE TO BE PERFORMED REFERENCE PAGES EACH USE 5 HOURS 25 HOURS 50 HOURS 100 HOURS EACH SEA SON Engine Check Oil Level Page 8 X Engine Initial Oil Change Page 10 X Engine Periodic Oil Change Page 10 X* Air Pre-Cleaner Service Sponge Pre- Cleaner Element Engine Manual X** Air Cleaner Replace Element Engine Manual X* ...

  • Snapper ESV25650B - page 14

    14 NOTES ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ _ ...

  • Snapper ESV25650B - page 15

    15 NOTES ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ _ ...

  • Snapper ESV25650B - page 16

    16 Safety Instructions & Operator’s Manual for EUROPEAN PUSH YARD VACUUM SERIES 0 IMPORTANT These products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissions information and critical safety w arnings. Read, Understand, and Fol ...

Fabricante Snapper Categoría Yard Vacuum

Los documentos del dispositivo Snapper ESV25650B que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Snapper
- manuales de instrucciones ESV25650B
- hojas de producto Snapper
- folletos informativos
- o etiquetas energéticas Snapper ESV25650B
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Snapper ESV25650B.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Snapper ESV25650B, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Snapper ESV25650B. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Snapper ESV25650B.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Snapper ESV25650B, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Snapper ESV25650B. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Snapper ESV25650B.

El manual de instrucciones completo de Snapper debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Snapper ESV25650B - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Snapper ESV25650B, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Snapper ESV25650B que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Snapper ESV25650B - que deben facilitarnos los primeros pasos durante el uso de Snapper ESV25650B
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Snapper ESV25650B
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Snapper ESV25650B en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Snapper ESV25650B?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Snapper ESV25650B, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Snapper ESV25650B probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Comentarios (0)