-
Canon 6313B002 - page 1
Instructions ENG EF24-70mm f/4L IS USM C OP Y ...
-
Canon 6313B002 - page 2
ENG-1 Thank you for purchasing a Canon product. Canon’s EF24-70mm f/4L IS USM is a high- performance standard zoom lens, for use with EOS cameras. The lens is installed with an Image Stabilizer , and allows for close-up shooting up to a magnication of 0.7x when the zoom ring is set to macro. “IS” stands for Image Stabilizer. “USM ...
-
Canon 6313B002 - page 3
ENG-2 Safety Precautions Safety Precautions Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision. Looking at the sun directly through the lens is especially hazardous. Whether it is attached to the camera or not, do not leave the lens under the sun without the lens cap attached. ...
-
Canon 6313B002 - page 4
ENG-3 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not make any changes or modications to the equipment unless ot ...
-
Canon 6313B002 - page 5
ENG-4 Nomenclature For de tailed info rmati on, refe rence pag e number s are provi ded in pare nthes es ( → **). Focus mode switch ( → 6) Distance scale ( → 12) Zoom ring ( → 6) Rubber ring ( → 5) Hood mount ( → 17) Filter Mounting Thread ( → 18) Focusing ring ( → 6) Image stabilizer switch ( → 13) Lens mount index ( → 5) C ...
-
Canon 6313B002 - page 6
ENG-5 1. Mounting and Detaching the Lens See your camera’s instructions for details on mounting and detaching the lens. The lens mount has a rubber ring for enhanced dust- and water-resistance. The rubber ring may cause slight abrasions around the camera’s lens mount, but this will not cause any problems. If the rubber ring becomes worn, it is ...
-
Canon 6313B002 - page 7
ENG-6 2. Setting the Focus Mode 3. Zooming After autofocusing in ONE SHOT AF mode, focus manually by pressing the shutter button halfway and turning the focusing ring. (Full-time manual focus) T o shoot in autofocus (AF) mode, set the focus mode switch to AF . T o shoot in manual focus (MF) mode, set the focus mode switch to MF , and focus by turni ...
-
Canon 6313B002 - page 8
ENG-7 4. Fixing the Zoom Ring The zoom ring can be xed to keep the lens at the shortest point. This function is convenient for carrying a camera on a strap because it prevents the lens from extending. 2 Slide the zoom ring lock lever in the direction indicated by the arrow . T o release the zoom ring, slide the zoom ring lock lever in the di ...
-
Canon 6313B002 - page 9
ENG-8 5. Setting for Close-up Shooting Setting the zoom ring to macro allows for close-up shooting. Aft er the zoom ring has be en set to macr o, the zoom ring can onl y be operat ed withi n the macro rang e (indic ated by the yell ow line) . T o set the zoom ring back to the norm al zoom ran ge, slid e the macro sw itch (zoo m ring lock le ...
-
Canon 6313B002 - page 10
ENG-9 6. Close-up Shooting The yellow line on the distance scale indicates the range in which image degradation is minimal during close-up shooting.* The following procedure shows how to focus within the range indicated by the yellow line in order to capture photos with high denition. * However , maximum magnication is 0.5x when shooting with ...
-
Canon 6313B002 - page 11
ENG-10 The magnication of this lens is determined by the combination of the following three factors: the focusing ring position, zoom ring position, and focusing distance. Therefore, the number of combinations for achieving a certain level of magnication is countless. The method for close-up shooting described here involves trying as much ...
-
Canon 6313B002 - page 12
ENG-1 1 7. Exposure during Close-up Shooting The correct exposure for a close-up shot largely depends on the subject. Therefore, try to bracket the exposure for the same subject. Using aperture-priority AE ( Av ) or Manual ( M ) picture-taking modes are recommended for macro photography as it is easy to adjust depth of eld and exposure i ...
-
Canon 6313B002 - page 13
ENG-12 8. Innity Compensation Mark For accurate manual focusing of subjects at innity , look through the viewnder or look at the magnied image* on the LCD screen while rotating the focusing ring. T o compensate for shifting of the innity focus point that results from changes in temperature. The innity position at normal temperatur ...
-
Canon 6313B002 - page 14
ENG-13 10. Image Stabilizer Y ou can use the image stabilizer in AF or MF mode. This function provides optimal image stabilization depending on shooting conditions (such as shooting still subjects, following shots, and close-up shooting). OFF ON The image stabilizer in this lens is effective for hand-held shots under the following conditions. C ...
-
Canon 6313B002 - page 15
ENG-14 When shooting a still subject, it compensates for camera shake in all directions. It compensates for vertical camera shake during following shots in a horizontal direction, and compensates for horizontal camera shake during following shots in a vertical direction. When you use a tripod, the Image Stabilizer should be turned off t ...
-
Canon 6313B002 - page 16
ENG-15 The magnication refers to the ratio between the subject’s size and the corresponding image size on the focal plane. 1 1. Image Stabilization during Close-up Shooting For normal close-up shooting, the higher the magnication, the faster the shutter speed must be to prevent blur caused by camera shake. Although it depends on the shootin ...
-
Canon 6313B002 - page 17
ENG-16 12. T aking Hand-held Close-ups Close-up shots are more prone to be affected by camera shake than with normal shooting. The Image Stabilizer ’s corrective effect is therefore less during close-ups than during normal shooting even with the same degree of camera shake. The depth of eld also becomes very shallow with close-ups, and moving ...
-
Canon 6313B002 - page 18
ENG-17 13. Hood ●Attaching T o attach the hood, align the hood’s attachment position mark with the red dot on the front of the lens, then turn the hood as shown by the arrow until the lens’ red dot is aligned with the hood’s stop position mark. ●Removing T o remove the hood, hold down the button on the side and turn the hood in the direct ...
-
Canon 6313B002 - page 19
ENG-18 16. Extension T ubes (Sold separately) 14. Filters (Sold separately) Y ou can attach extension tube EF12 II or EF25 II for magnied shots. The shooting distance and magnication are shown below . An extension tube cannot be used when the zoom ring is set to macro. MF mode is recommended for accurate focusing. Focusing Distance Range (mm) ...
-
Canon 6313B002 - page 20
ENG-19 Specications The lens leng th is measu red from the mou nt surfa ce to the fron t end of the len s. Add 24.2 mm when inc luding the len s cap and dus t cap. The size and we ight list ed are for the lens only , except as indi cated. Ext ender s cannot be used with this lens . Ape rture sett ings are spec ied on the came ...
-
Canon 6313B002 - page 21
CT1-8585-001 1012Ni © CANON INC. 2012 C OP Y ...
¿Tienes una pregunta acerca de Canon 6313B002?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Canon 6313B002, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Canon 6313B002 probablemente compartirá una forma de solucionarlo.