Canon 6313B002の取扱説明書

21ページ 1.27 mb
ダウンロード

ページに移動 of 21

Summary
  • Canon 6313B002 - page 1

    Instructions ENG EF24-70mm f/4L IS USM C OP Y ...

  • Canon 6313B002 - page 2

    ENG-1 Thank you for purchasing a Canon product. Canon’s EF24-70mm f/4L IS USM is a high- performance standard zoom lens, for use with EOS cameras. The lens is installed with an Image Stabilizer , and allows for close-up shooting up to a magnication of 0.7x when the zoom ring is set to macro.  “IS” stands for Image Stabilizer.  “USM ...

  • Canon 6313B002 - page 3

    ENG-2 Safety Precautions Safety Precautions  Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision. Looking at the sun directly through the lens is especially hazardous.  Whether it is attached to the camera or not, do not leave the lens under the sun without the lens cap attached. ...

  • Canon 6313B002 - page 4

    ENG-3 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not make any changes or modications to the equipment unless ot ...

  • Canon 6313B002 - page 5

    ENG-4 Nomenclature  For de tailed info rmati on, refe rence pag e number s are provi ded in pare nthes es ( → **). Focus mode switch ( → 6) Distance scale ( → 12) Zoom ring ( → 6) Rubber ring ( → 5) Hood mount ( → 17) Filter Mounting Thread ( → 18) Focusing ring ( → 6) Image stabilizer switch ( → 13) Lens mount index ( → 5) C ...

  • Canon 6313B002 - page 6

    ENG-5 1. Mounting and Detaching the Lens See your camera’s instructions for details on mounting and detaching the lens. The lens mount has a rubber ring for enhanced dust- and water-resistance. The rubber ring may cause slight abrasions around the camera’s lens mount, but this will not cause any problems. If the rubber ring becomes worn, it is ...

  • Canon 6313B002 - page 7

    ENG-6 2. Setting the Focus Mode 3. Zooming After autofocusing in ONE SHOT AF mode, focus manually by pressing the shutter button halfway and turning the focusing ring. (Full-time manual focus) T o shoot in autofocus (AF) mode, set the focus mode switch to AF . T o shoot in manual focus (MF) mode, set the focus mode switch to MF , and focus by turni ...

  • Canon 6313B002 - page 8

    ENG-7 4. Fixing the Zoom Ring The zoom ring can be xed to keep the lens at the shortest point. This function is convenient for carrying a camera on a strap because it prevents the lens from extending. 2 Slide the zoom ring lock lever in the direction indicated by the arrow .  T o release the zoom ring, slide the zoom ring lock lever in the di ...

  • Canon 6313B002 - page 9

    ENG-8 5. Setting for Close-up Shooting Setting the zoom ring to macro allows for close-up shooting.  Aft er the zoom ring has be en set to macr o, the zoom ring can onl y be operat ed withi n the macro rang e (indic ated by the yell ow line) .  T o set the zoom ring back to the norm al zoom ran ge, slid e the macro sw itch (zoo m ring lock le ...

  • Canon 6313B002 - page 10

    ENG-9 6. Close-up Shooting The yellow line on the distance scale indicates the range in which image degradation is minimal during close-up shooting.* The following procedure shows how to focus within the range indicated by the yellow line in order to capture photos with high denition. * However , maximum magnication is 0.5x when shooting with ...

  • Canon 6313B002 - page 11

    ENG-10  The magnication of this lens is determined by the combination of the following three factors: the focusing ring position, zoom ring position, and focusing distance. Therefore, the number of combinations for achieving a certain level of magnication is countless. The method for close-up shooting described here involves trying as much ...

  • Canon 6313B002 - page 12

    ENG-1 1 7. Exposure during Close-up Shooting  The correct exposure for a close-up shot largely depends on the subject. Therefore, try to bracket the exposure for the same subject.  Using aperture-priority AE ( Av ) or Manual ( M ) picture-taking modes are recommended for macro photography as it is easy to adjust depth of eld and exposure i ...

  • Canon 6313B002 - page 13

    ENG-12 8. Innity Compensation Mark For accurate manual focusing of subjects at innity , look through the viewnder or look at the magnied image* on the LCD screen while rotating the focusing ring. T o compensate for shifting of the innity focus point that results from changes in temperature. The innity position at normal temperatur ...

  • Canon 6313B002 - page 14

    ENG-13 10. Image Stabilizer Y ou can use the image stabilizer in AF or MF mode. This function provides optimal image stabilization depending on shooting conditions (such as shooting still subjects, following shots, and close-up shooting). OFF ON The image stabilizer in this lens is effective for hand-held shots under the following conditions.  C ...

  • Canon 6313B002 - page 15

    ENG-14  When shooting a still subject, it compensates for camera shake in all directions.  It compensates for vertical camera shake during following shots in a horizontal direction, and compensates for horizontal camera shake during following shots in a vertical direction.  When you use a tripod, the Image Stabilizer should be turned off t ...

  • Canon 6313B002 - page 16

    ENG-15 The magnication refers to the ratio between the subject’s size and the corresponding image size on the focal plane. 1 1. Image Stabilization during Close-up Shooting For normal close-up shooting, the higher the magnication, the faster the shutter speed must be to prevent blur caused by camera shake. Although it depends on the shootin ...

  • Canon 6313B002 - page 17

    ENG-16 12. T aking Hand-held Close-ups Close-up shots are more prone to be affected by camera shake than with normal shooting. The Image Stabilizer ’s corrective effect is therefore less during close-ups than during normal shooting even with the same degree of camera shake. The depth of eld also becomes very shallow with close-ups, and moving ...

  • Canon 6313B002 - page 18

    ENG-17 13. Hood ●Attaching T o attach the hood, align the hood’s attachment position mark with the red dot on the front of the lens, then turn the hood as shown by the arrow until the lens’ red dot is aligned with the hood’s stop position mark. ●Removing T o remove the hood, hold down the button on the side and turn the hood in the direct ...

  • Canon 6313B002 - page 19

    ENG-18 16. Extension T ubes (Sold separately) 14. Filters (Sold separately) Y ou can attach extension tube EF12 II or EF25 II for magnied shots. The shooting distance and magnication are shown below . An extension tube cannot be used when the zoom ring is set to macro. MF mode is recommended for accurate focusing. Focusing Distance Range (mm) ...

  • Canon 6313B002 - page 20

    ENG-19 Specications  The lens leng th is measu red from the mou nt surfa ce to the fron t end of the len s. Add 24.2 mm when inc luding the len s cap and dus t cap.  The size and we ight list ed are for the lens only , except as indi cated.  Ext ender s cannot be used with this lens .  Ape rture sett ings are spec ied on the came ...

  • Canon 6313B002 - page 21

    CT1-8585-001 1012Ni © CANON INC. 2012 C OP Y ...

メーカー Canon カテゴリー Camera Lens

Canon 6313B002のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 6313B002の取扱説明書
- Canonの製品カード
- パンフレット
- またはCanon 6313B002の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Canon 6313B002の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Canon 6313B002の取り付け説明書、サービスマニュアル、簡易説明書、またはCanon 6313B002のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Canon 6313B002の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Canon 6313B002デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがCanon 6313B002を使用するのを助ける技術的文書のことです。説明書は通常、全てのCanon 6313B002ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Canonの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Canon 6313B002の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははCanon 6313B002の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Canon 6313B002に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Canon 6313B002デバイスの基本機能を使うにあたってのヒント。 Canon 6313B002のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Canon 6313B002に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるCanon 6313B002のメーカー/サービスへの連絡先に関する情報。

Canon 6313B002についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもCanon 6313B002の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCanon 6313B002で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)