Manual de instrucciones Cisco Systems OC-12/STM-14

20 de páginas 0.33 mb
Descargar

Pasar a la página of 20

Summary
  • Cisco Systems OC-12/STM-14 - page 1

    Corporate Headquarters: Copyright © 2004 Cisco Systems, Inc. All rights reserved. Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Cisco IOS Software Configuration for the 1-Port Channelized OC-12/STM-4 (DS3) Line Card This document describes the software con figurat io n procedure for the 1- port channelized OC-12/STM-4 (DS ...

  • Cisco Systems OC-12/STM-14 - page 2

    Cisco IOS Software Configuration for the 1-Port Chann eliz ed OC-12/STM -4 (DS3) Line Card Prerequisites for the 1-Port Channeliz ed OC- 1 2/ST M-4 (DS3) Line Card 2 Cisco IOS Release 12.0(8)S Prerequisites for the 1-Port Channelized OC-12/STM-4 (DS3) Line Card The Cisco 1 2000 Series Rou ter must have at least one clock and sc heduler card (CSC) i ...

  • Cisco Systems OC-12/STM-14 - page 3

    Cisco IOS Software Configuration for th e 1-Port Channelized OC-12/STM-4 (DS3) Line Card How to Configure the 1-Port Channe lized OC-12/STM-4 (DS3) Line Card 3 Cisco IOS Release 12.0(8)S (Remainder of displayed text omi tted from e xample) Ta b l e 1 sho ws the def ault OC-12 controller conf igura tion of a 1-port channeli zed OC-12/STM-4 (DS3) lin ...

  • Cisco Systems OC-12/STM-14 - page 4

    Cisco IOS Software Configuration for the 1-Port Chann eliz ed OC-12/STM -4 (DS3) Line Card How to Configure the 1-Port Channelized OC-12/STM-4 (DS3) Line Card 4 Cisco IOS Release 12.0(8)S Configuring the DS3 Serial Interface After you v e rify the OC-12 controller co nfiguration, you can conf igure the associated DS3 channel and serial interfaces o ...

  • Cisco Systems OC-12/STM-14 - page 5

    Cisco IOS Software Configuration for th e 1-Port Channelized OC-12/STM-4 (DS3) Line Card How to Configure the 1-Port Channe lized OC-12/STM-4 (DS3) Line Card 5 Cisco IOS Release 12.0(8)S The prompt changes to inter face conf igu ration mode. The follo wing e xample is for a 1-port channelized OC-12/STM-4 (DS3) line card in chassis slot 1: Router(co ...

  • Cisco Systems OC-12/STM-14 - page 6

    Cisco IOS Software Configuration for the 1-Port Chann eliz ed OC-12/STM -4 (DS3) Line Card How to Configure the 1-Port Channelized OC-12/STM-4 (DS3) Line Card 6 Cisco IOS Release 12.0(8)S Y ou can connect the local (near -end) DS3 port to the remote (f ar-end) DS3 port using a third- party DSU. Then use the telnet command from the local DS3 port to ...

  • Cisco Systems OC-12/STM-14 - page 7

    Cisco IOS Software Configuration for th e 1-Port Channelized OC-12/STM-4 (DS3) Line Card How to Configure the 1-Port Channe lized OC-12/STM-4 (DS3) Line Card 7 Cisco IOS Release 12.0(8)S The Cisco Remote Connection Management feature uses two Cisco-proprietary DS3 C-bit parity Far -End Alarm and Cont rol (FEAC) messages that ar e not us ed in the A ...

  • Cisco Systems OC-12/STM-14 - page 8

    Cisco IOS Software Configuration for the 1-Port Chann eliz ed OC-12/STM -4 (DS3) Line Card How to Configure the 1-Port Channelized OC-12/STM-4 (DS3) Line Card 8 Cisco IOS Release 12.0(8)S Enabling Payload Scrambling Payload (data) scrambling con verts th e data receive d by the lo cal or remote DS3 ports from an y of the three supported thi rd-part ...

  • Cisco Systems OC-12/STM-14 - page 9

    Cisco IOS Software Configuration for th e 1-Port Channelized OC-12/STM-4 (DS3) Line Card How to Configure the 1-Port Channe lized OC-12/STM-4 (DS3) Line Card 9 Cisco IOS Release 12.0(8)S Last clearing of "show interface" counters 1d16h Queueing strategy: fifo Output queue 0/40, 0 drops; input queue 0/75, 0 drops 5 minute input rate 0 bits ...

  • Cisco Systems OC-12/STM-14 - page 10

    Cisco IOS Software Configuration for the 1-Port Chann eliz ed OC-12/STM -4 (DS3) Line Card How to Configure the 1-Port Channelized OC-12/STM-4 (DS3) Line Card 10 Cisco IOS Release 12.0(8)S – show contr ollers oc12 slot/port:c hannel# V erify the Cisco Remote Connection Management configuration b y entering the show contr ollers oc12 slot/port:c h ...

  • Cisco Systems OC-12/STM-14 - page 11

    Cisco IOS Software Configuration for th e 1-Port Channelized OC-12/STM-4 (DS3) Line Card How to Configure the 1-Port Channe lized OC-12/STM-4 (DS3) Line Card 11 Cisco IOS Release 12.0(8)S FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................ FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................ Router • Use the show protocol ...

  • Cisco Systems OC-12/STM-14 - page 12

    Cisco IOS Software Configuration for the 1-Port Chann eliz ed OC-12/STM -4 (DS3) Line Card How to Configure the 1-Port Channelized OC-12/STM-4 (DS3) Line Card 12 Cisco IOS Release 12.0(8)S Using Loopback Commands The 1-port channelized OC-12 /STM-4 (DS3) line card supports loop back modes for both the OC-1 2 controller and for each of the associ at ...

  • Cisco Systems OC-12/STM-14 - page 13

    Cisco IOS Software Configuration for th e 1-Port Channelized OC-12/STM-4 (DS3) Line Card How to Configure the 1-Port Channe lized OC-12/STM-4 (DS3) Line Card 13 Cisco IOS Release 12.0(8)S • Line—This loopback mode loops data from the receiv e path to the transmit path at the mux/demux part on the line card, returning al l recei ved data at the ...

  • Cisco Systems OC-12/STM-14 - page 14

    Cisco IOS Software Configuration for the 1-Port Chann eliz ed OC-12/STM -4 (DS3) Line Card How to Configure the 1-Port Channelized OC-12/STM-4 (DS3) Line Card 14 Cisco IOS Release 12.0(8)S set to internal o n the local OC-12 controller in slot 1 with IP address 10.0.0 .2. Clock source is set to line on the remote OC-12 controller in slot 1 with IP ...

  • Cisco Systems OC-12/STM-14 - page 15

    Cisco IOS Software Configuration for th e 1-Port Channelized OC-12/STM-4 (DS3) Line Card How to Configure the 1-Port Channe lized OC-12/STM-4 (DS3) Line Card 15 Cisco IOS Release 12.0(8)S Entering Errors in BER Tests T o insert intentional erro rs into the BER test stream, use the follo wing command syntax: bert errors [ no-of-err ors ], where the ...

  • Cisco Systems OC-12/STM-14 - page 16

    Cisco IOS Software Configuration for the 1-Port Chann eliz ed OC-12/STM -4 (DS3) Line Card How to Configure the 1-Port Channelized OC-12/STM-4 (DS3) Line Card 16 Cisco IOS Release 12.0(8)S The follo wing example sho ws the information of a BER test that is still in prog ress: Router# show controller OC12 1/0:1 bert Interface Serial1/0:1 (DS3 port 1 ...

  • Cisco Systems OC-12/STM-14 - page 17

    Cisco IOS Software Configuration for th e 1-Port Channelized OC-12/STM-4 (DS3) Line Card Configuration Examples for the 1-Port Channelized OC-12/STM-4 (DS3) Line Card 17 Cisco IOS Release 12.0(8)S Configuration Examples for the 1-Port Channelized OC-12/STM-4 (DS3) Line Card Figure 2 sho ws two 1-port channelized OC-12/S T M-4 (DS3) line card conf i ...

  • Cisco Systems OC-12/STM-14 - page 18

    Cisco IOS Software Configuration for the 1-Port Chann eliz ed OC-12/STM -4 (DS3) Line Card Configuration Examples for the 1-Port Channelized OC- 12/STM- 4 (D S3) Line Card 18 Cisco IOS Release 12.0(8)S Figur e 2 1 -P ort Channelized OC-12/S T M-4 (DS3 ) L i n e Ca rd In te rop e ra b i l it y Di a gra m The following e xample shows a typical conf i ...

  • Cisco Systems OC-12/STM-14 - page 19

    Cisco IOS Software Configuration for th e 1-Port Channelized OC-12/STM-4 (DS3) Line Card Additional References 19 Cisco IOS Release 12.0(8)S Additional References The follo wing sections provide r eferences related to the 1-port channelized OC-12/STM-4 (DS3) line card. Related Documents Technical Assistance Copyright © 200 4 Cisco Syst ems, Inc. A ...

  • Cisco Systems OC-12/STM-14 - page 20

    Cisco IOS Software Configuration for the 1-Port Chann eliz ed OC-12/STM -4 (DS3) Line Card Additional References 20 Cisco IOS Release 12.0(8)S ...

Fabricante Cisco Systems Categoría Network Router

Los documentos del dispositivo Cisco Systems OC-12/STM-14 que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Cisco Systems
- manuales de instrucciones OC-12/STM-14
- hojas de producto Cisco Systems
- folletos informativos
- o etiquetas energéticas Cisco Systems OC-12/STM-14
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Cisco Systems OC-12/STM-14.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Cisco Systems OC-12/STM-14, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Cisco Systems OC-12/STM-14. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Cisco Systems OC-12/STM-14.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Cisco Systems OC-12/STM-14, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Cisco Systems OC-12/STM-14. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Cisco Systems OC-12/STM-14.

El manual de instrucciones completo de Cisco Systems debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Cisco Systems OC-12/STM-14 - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Cisco Systems OC-12/STM-14, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Cisco Systems OC-12/STM-14 que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Cisco Systems OC-12/STM-14 - que deben facilitarnos los primeros pasos durante el uso de Cisco Systems OC-12/STM-14
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Cisco Systems OC-12/STM-14
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Cisco Systems OC-12/STM-14 en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Cisco Systems OC-12/STM-14?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Cisco Systems OC-12/STM-14, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Cisco Systems OC-12/STM-14 probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Comentarios (0)