-
Atech Tech LIBRA-02 HM - page 1
1 Operating and Safety Instructions LIBRA-02 M / LIBRA-02 HM COPY ROUTER User's Manual ...
-
Atech Tech LIBRA-02 HM - page 2
2 Operating and Safety Instructions CONTENTS Page 1. General Information 3 1.1. I ntroduction 3 1.2. Manufacturer 3 2. Machine’s Descr i ption and Purpose of Use 3 2.1. Machine’s description 3 2.2. Technical features 5 2.3. Overall dimensions 6 2.4. Part lists and technical drawings 7 3. Safety 9 3.1. Safety information 9 3.2. Prevention of acc ...
-
Atech Tech LIBRA-02 HM - page 3
3 Operating and Safety Instructions 1. GENERAL INFORMATION 1.1. INTRODUCTION The user’s m anual g iven by the manufacturer contains necessary information a bout th e machine parts. E ach m achine operator should read t hese instructions carefully, and the machine should be operated after fu lly understanding them. Safe an d e fficient use of the ...
-
Atech Tech LIBRA-02 HM - page 4
4 Operating and Safety Instructions Please me ntion th e below mentioned data in all your corr espondence regarding the machine with the manufactur er and/or your ATECH dealer. *Machine model *Machine’s serial number *Voltage and frequency *Name of dealer where machine was purchased *Date of purchase *Description of the machine fault *Average dai ...
-
Atech Tech LIBRA-02 HM - page 5
5 Operating and Safety In structions 2.2. TECHNI CAL FEA TURES Technic al Features (American) LIBR A-02 M 8 00W/120 0W 110 V/220V 60H z 14000 rpm --- 90 psi 24x22 x57" 160 lb LIBRA-02 H M 800 W 220 V/440V 60H z 14 000 rp m 3000 rpm 90-120 p si 26x26 x54" 210 lb Technical Featur es (Metric) ...
-
Atech Tech LIBRA-02 HM - page 6
6 Operating and Safety In structions 2.3. OVERALL DI MENSIONS Figure-1 ...
-
Atech Tech LIBRA-02 HM - page 7
7 Operating and Safety In structions 2.4. PART LISTS AND TECHNICAL DRA WINGS Figure-3 ...
-
Atech Tech LIBRA-02 HM - page 8
8 Operating and Safety In structions No STOCK NO / PART NAME QTY 3 141- 093 Washer Diameter 30x8x7 6 5 111- 075 Right set square 1 6 111-073 Lower mot ion arm connection 1 7 144-006 Motion shaft 4 8 111-077 Motion bearing 1 9 224-001 Plastic support 2 11 141-083 Copy template 1 13 111-068 Fixing knob bearing 2 14 141-078 Arm pin 1 15 145-017 Fixing ...
-
Atech Tech LIBRA-02 HM - page 9
9 Operating and Safety In structions 3. SAFETY 3.1. SAFETY INFOR MATION The symbols shown hereunder are necessa ry to be read with special a ttention. Not reading or ob serv ing of them m ay cause d amage to the equipment o r persona l injury The IMP ORTANT symbol above is one telli ng t o apply specia l care and to be careful at carrying out the s ...
-
Atech Tech LIBRA-02 HM - page 10
10 Operating and Safety In structions DANGER WARNIN G The DANGER WARNING above warns you a gainst specific d angers, and definitely requires the text to read. Not observing may result in seri ous bodily injury. Please read the user’s ma nual carefully b efore u sing th e machine or carry ing out maintenance. 3.2. PREVENTION OF ACCIDEN TS 3.2.1 Ou ...
-
Atech Tech LIBRA-02 HM - page 11
11 Operating and Safety In structions 3.3.2. I f the power ca ble should be damaged during operation, don't t ouch and unplug it. Never use d amaged power cables. 3.3.3. Don’t ov erload m achines f or drilling a nd cutting. Your machine wi ll operate more safely with power supp ly in accordance with th e stipulated values. 3.3.4. Don’t pla ...
-
Atech Tech LIBRA-02 HM - page 12
12 Operating and Safety In structions 3.3.15. I f you are required to operate the ma chine o utside, use only appropriate extension cables. 3.3.16. Repairs should be carried out by qualified technicians only. O therwise, accidents m ay occur. 3.3.17. Before starting a new operation, check the appropriate function o f protective devices a nd tools, ...
-
Atech Tech LIBRA-02 HM - page 13
13 Operating and Safety In structions 5.1.4. At the copy rou te r machines LIBRA-02 M/HM, fix the support ba rs (Figure 4) to the back fenc e No. 5 using the handle No. 29. Fix the fenc e support N o. 113 w ith its sp ecial scre w No. 2 7. Figure - 5 Figure - 4 Clamp hou sing (Mechanic) Clamp cylinder (Mechanic) Back Fence Clamp housing (Pneumatic) ...
-
Atech Tech LIBRA-02 HM - page 14
14 Operating and Safety In structions 5.2. ELECTRIC CONN ECTION 5.2.1 The three-phas e electric cable socket has to be in a cc ordanc e with the so ck et on the mach ine. 5.2.2 At our m odels LIBRA- 02 M the voltage can be ch osen as 230V 50 Hz (110V 60Hz) or 400V 50 Hz (220V/ 440V 60Hz) . The volta ge at o ur model LIBRA-02 HM is 400V 50 H z (220V ...
-
Atech Tech LIBRA-02 HM - page 15
15 Operating and Safety In structions 7. OPERA TION 7.1. STARTING TO W ORK 7.1.1 Ensur e that t he machin e table an d all ki nd of parts a re c lean and dry. Degre ase and dry t he machin e table. Especia lly ensure that the h olding grip s an d handles are clean an d dry. 7.1.2 C lean all surfa ces of th e machine from ch ip and for eign partic l ...
-
Atech Tech LIBRA-02 HM - page 16
16 Operating and Safety In structions 7.1.15 The router bi t and tri ple drill u nit should be move d down only after th e regula r rotation has been re ach ed. 8. CHAN GING THE R OUTER BIT AN D DRILL BITS 8.1 I f it beco mes necessary to replace the router bit for any reas on, follow th e follow ing order fo r replac ement: 8.1.1 Un plug th e mach ...
-
Atech Tech LIBRA-02 HM - page 17
17 Operating and Safety In structions 9. ADJUS TING THE AIR PRESSURE OF P NEUMAT IC CLAMPS (AT O UR MODELS LIBRA -02 M and LIBR A-02 HM) 9.1. P ull the adjust ment b utton of the c ondition er upwa rds (Fig. 6) a - Turnin g the a djustment button in c lockwis e direct ion incr eases th e pressure b - Turnin g the a djustment button in c ounter c lo ...
-
Atech Tech LIBRA-02 HM - page 18
18 Operating and Safety In structions F igure- 6 Figure-7 Manomet er Pressure adjustment button Oil cylinder Oil filling cap Triple drilling adjustment screw Air pressure and water discharge screw ...
-
Atech Tech LIBRA-02 HM - page 19
19 Operating and Safety In structions 9.3 I n order to prevent that the water inside the air sy stem c aus es da mage to th e pneu matic syste m components, the con ditioner unit collects the water in t h e collection recepta cle. Dischar ge the c ollect ed water periodic ally (at the end of the workin g day) by pr essing the bu tton un der the cy ...
-
Atech Tech LIBRA-02 HM - page 20
20 Operating and Safety In structions 12. ELECTRI C / PNEUMATI C COMPONEN TS 11.1 ELECT RIC C OMPONEN TS STOCK COD E PART NAME QTY 161-006 MAIN SWITCH KG 1OB 1 162-003 CAPACITOR 25 MF 250 V 1 162-004 CONTACTOR LC1 K 0610 M7 1 163-004 SINGLE-PHASE WIRING 1 163-006 ROTOR STATOR 1 164-002 0.75 mm CABLE (BLACK) 0.5 164-006 1.5 m m CABLE (BLACK) 1.5 164 ...
-
Atech Tech LIBRA-02 HM - page 21
21 Operating and Safety In structions 12. TROU BLESHOOT ING Here are some rec ommendat ions f or solving u rgent pr oblems. If the t rouble can not be solved, or if you hav e a proble m oth er than t hose described he reun der, pleas e contact our t echnical serv ice or your nearest dealer. TROUB LE CAUSES REMEDY Not cooli ng the router bit surface ...
¿Tienes una pregunta acerca de Atech Tech LIBRA-02 HM?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Atech Tech LIBRA-02 HM, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Atech Tech LIBRA-02 HM probablemente compartirá una forma de solucionarlo.