-
Adaptec 2268300R - page 1
PMC-Sierra Confidential — Preliminary Draft 10/21/11 PMC-Sierra Confidential — Preliminary Draft 10/21/11 Installation and User’ s Guide Ser ial A ttached SCSI RAID C ont r o llers ...
-
Adaptec 2268300R - page 2
● 2 Copyright Copyright © 2011 PMC-Sierra, Inc. All rig hts reserved. The information in this document is proprietary and confidential to PMC-Sierra, Inc., and for its cu stomers’ internal us e. In a ny event, no part of this document may be repr oduced or redistributed in any form without the express written consen t of PMC- Sier ra , Inc. T ...
-
Adaptec 2268300R - page 3
● 3 Adaptec by PMC Product Support If y ou hav e questions abou t installing or using y our Adapt ec by PMC pr oduct, check this document first—y ou will find answers t o most of your questions. If you need further assistance, use the support options listed belo w . T o expedite y our serv ice, ha ve y o ur computer in fr ont of you. T ec hnica ...
-
Adaptec 2268300R - page 4
● 4 Limited 3-Y ear Hardw are W arranty 1. PMC-S ierra, I nc. (“P MC-Si erra ”) warrants to the pur cha ser o f th is product that it will be free from d efects in material and workmanship for a period of three (3) y ears from the date of pur chase. If the pr oduct should bec ome defectiv e within the warranty p eriod, PMC-Sierra, at its opti ...
-
Adaptec 2268300R - page 5
● 5 Regulator y Compliance Statements Federal Communications Commis sion Radio F requency Interference Statement W ARNING: Changes or modifications to this unit not expressly appr oved by the party r esponsible for compliance could void the us er ’s authority to operate the equipment. This equipment has been tested and found to comply with the ...
-
Adaptec 2268300R - page 6
● 6 Korean Compliance (KCC) Statement Adaptec by PMC products ar e tested and certified by KCC: KCC-REM-KHK-ASR-6xx 5 The above certification covers the following series: ASR-6805, ASR-6445, A SR-6405 ASR-6805E, ASR-6405E, AS R-6805Q ASR-6805T , ASR-6405T, ASR-6805TQ This equipment is home use (Class B) electr om agnetic wave suitability equipmen ...
-
Adaptec 2268300R - page 7
Contents 1 About This Guide What You Need to Know Before You Begin ................................................... 13 Terminology Used in this Guide ...................................................................... 13 How to Find More Information ....................................................................... 13 2 Kit Contents and ...
-
Adaptec 2268300R - page 8
Contents ● 8 About the Adaptec RAID 6445 ......................................................................... 34 About the Adaptec RAID 6805/6805Q ............................................................ 35 About the Adaptec RAID 6405E ...................................................................... 36 About the Adaptec RAID 6805E ...
-
Adaptec 2268300R - page 9
Contents ● 9 Installing with Red Hat Linux 6 or Fedora Linux ........................................... 62 Installing with SuSE Linux ............................................................................... 63 Installing with Debian Linux ............................................................................ 63 Installing with Ubunt ...
-
Adaptec 2268300R - page 10
Contents ● 10 A Introduction to SAS Terminology Used in This Chapter ................................................................. 89 What is SAS? ...................................................................................................... 89 How Do SAS Devices Communicate? ........................................................... ...
-
Adaptec 2268300R - page 11
Contents ● 11 Opening Serial Select .................................................................................. 110 Applying Changes and Exiting ................................................................. 110 Modifying Your Controlle r’s Configuration ........................................... 110 Formatting and Verify ing Disk Dr ...
-
Adaptec 2268300R - page 12
Contents ● 12 F Safety Information Electrostatic Discharge (ESD) ........................................................................ 147 G Technical Specifications Environmental Spec ifications ......................................................................... 149 DC Power Requirements ................................................. ...
-
Adaptec 2268300R - page 13
1 About This Guide In this chapter ... W hat Y ou Need t o Kno w Befor e Y ou Begin .......................................................................... 13 T erminolog y U sed in this G uide .............................. .............................................................. 13 Ho w to Find M ore Information ......................... ...
-
Adaptec 2268300R - page 14
Chapter 1: About This Guide ● 13 What Y ou Need to Kno w Before Y ou Begin Y ou should be familiar w ith comput er hardwar e , data storage, RAID technology , and SAS and Serial A T A (SA T A) technology . (For an introduction to SAS, see page 88 .) Y ou should also be famili ar wit h Direct-Att ached Storage (D AS) concepts and t echnology . Not ...
-
Adaptec 2268300R - page 15
2 Kit Contents and System Requirements In this chapter ... Kit C ontents ................................................................................ ................................... ......... 15 Syst em R equirements ....................................................................................................... ..... .1 5 This chapt ...
-
Adaptec 2268300R - page 16
Chapter 2: Kit Contents and System Requirements ● 15 Kit Cont ents ● Ada p te c b y P M C RA I D co n t ro l le r ● Ad aptec Installation D VD (bootable), including co ntroller driv ers, A daptec Storage Manager , AR CCONF command line utility , and documentation ● Cables (N ot all kits contain cables. If y our kit does, the typ e and quant ...
-
Adaptec 2268300R - page 17
Chapter 2: Kit Contents and System Requirements ● 16 ● DVD- R OM driv e ● Floppy disk driv e, USB flash driv e, or CD burner , for cr eating driv er disks and bootable media ...
-
Adaptec 2268300R - page 18
3 About Y our RAID Controller In this chapter ... Standard RAID Co ntroller F eatures ...................................................................................... 18 Ad ding a Battery Backup Module ........ ........................................................................... ...... 19 Ad ding a Flash Backup M odule ................ ...
-
Adaptec 2268300R - page 19
Chapter 3: About Y our RAID Controller ● 18 Standard RAID Controller F eatures ● Support for SAS disk dr iv es, SA T A/SA T A II disk drives, and SA T A and SAS Solid State Drives (SSDs) ● Flash R OM for updates to c ontr oller firm ware, BIOS, and the A dapt ec RAID Configuration utility ● Disk drive ho t-swapping ● E ve nt logging and b ...
-
Adaptec 2268300R - page 20
Chapter 3: About Y our RAID Controller ● 19 Advanced Data Prot ection Suite Note: The following features are suppor ted on Adaptec Series 5 and Series 6 co ntrollers. Stripe d Mirror s are also suppor ted on Series 2 and Series 6E cont rollers. ● Copyb ack Hot Sp are —Y ou can use this feature to mov e data from a hot spar e back to its origi ...
-
Adaptec 2268300R - page 21
Chapter 3: About Y our RAID Controller ● 20 About the Adaptec RAID 5085 The Adapt ec RAID 5085 is a SAS RAID co ntroller with these features: Form F actor Low-profile MD2 Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 8 Standard cache 512 MB DDR2 Connectors, external 2 mini-SAS x4 (S ...
-
Adaptec 2268300R - page 22
Chapter 3: About Y our RAID Controller ● 21 About the Adaptec RAID 5405 The Adaptec R AID 5405 is a SAS RAID co ntroller with these features: Form F actor Low-profile MD2 Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 4 Standard cache 256 MB DDR2 Connectors, inter nal 1 mini-SAS x4 ( ...
-
Adaptec 2268300R - page 23
Chapter 3: About Y our RAID Controller ● 22 About the Adaptec RAID 5445 The Adaptec R AID 5445 is a SAS RAID co ntroller with these features: Fo rm Fa ctor Low-profile MD2 Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 8 Standard cache 512 MB DDR2 Connectors 1 mini-SAS x4 (SFF-8087) ...
-
Adaptec 2268300R - page 24
Chapter 3: About Y our RAID Controller ● 23 About the Adaptec RAID 5805/5805Q The Adaptec R AID 5805/5805Q is a SAS RAID controlle r with these features: Form F actor Low-profile MD2 Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 8 Standard cache 512 MB DDR2 Connectors, inter nal 2 m ...
-
Adaptec 2268300R - page 25
Chapter 3: About Y our RAID Controller ● 24 About the Adaptec RAID 5 1 2 45 The Adaptec R AID 51245 is a SAS RAID co ntroller with these features: Form F actor Full Height, Half Length Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 16 Standard cache 512 MB DDR2 Connectors, Inter nal ...
-
Adaptec 2268300R - page 26
Chapter 3: About Y our RAID Controller ● 25 About the Adaptec RAID 5 1645 The Adaptec R AID 51645 is a SAS RAID co ntroller with these features: Form F actor Full Height, Half Length Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 20 Standard cache 512 MB DDR2 Connectors, Inter nal 4 ...
-
Adaptec 2268300R - page 27
Chapter 3: About Y our RAID Controller ● 26 About the Adaptec RAID 52 445 The Adaptec R AID 52445 is a SAS RAID co ntroller with these features: Form F actor Full Height, Half Length Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 28 Standard cache 512 MB DDR2 Connectors, Inter nal 6 ...
-
Adaptec 2268300R - page 28
Chapter 3: About Y our RAID Controller ● 27 About the Adaptec RAID 5405Z The Adaptec R AID 5405Z is a SAS RAID controlle r with these features: Form F actor Low-profile MD2 Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 4 Standard cache 512 MB DDR2 Connectors, inter nal 1 mini-SAS x4 ...
-
Adaptec 2268300R - page 29
Chapter 3: About Y our RAID Controller ● 28 About the Adaptec RAID 5445Z The Adaptec R AID 5445Z is a SAS RAID controlle r with these features: Fo rm Fa ctor Low-profile MD2 Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 8 Standard cache 512 MB DDR2 Connectors 1 mini-SAS x4 (SFF-8087 ...
-
Adaptec 2268300R - page 30
Chapter 3: About Y our RAID Controller ● 29 About the Adaptec RAID 5805Z/5805ZQ The Ad aptec RAID 5805Z/5805Z Q is a SAS RA ID c ontroller with these features: Form F actor Low-profile MD2 Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 8 Standard cache 512 MB DDR2 Connectors, inter n ...
-
Adaptec 2268300R - page 31
Chapter 3: About Y our RAID Controller ● 30 About the Adaptec RAID 2045 The Adapt ec RAID 2045 is a SAS RAID co ntroller with these features: Form F actor Low-profile MD2 Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 4 Standard cache 128 MB DDR2 Connectors, external 1 mini-SAS x4 (S ...
-
Adaptec 2268300R - page 32
Chapter 3: About Y our RAID Controller ● 31 About the Adaptec RAID 2 405/2 405Q The Adapt ec RAID 2405/2405Q is a SAS RAID c ontroller with these features: Form F actor Low-profile MD2 Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 4 Standard cache 128 MB DDR2 Connectors, inter nal 1 ...
-
Adaptec 2268300R - page 33
Chapter 3: About Y our RAID Controller ● 32 About the Adaptec RAID 2805 The Adapt ec RAID 2805 is a SAS RAID co ntroller with these features: Form F actor Low-profile MD2 Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 8 Standard cache 128 MB DDR2 Connectors, inter nal 2 mini-SAS x4 ( ...
-
Adaptec 2268300R - page 34
Chapter 3: About Y our RAID Controller ● 33 About the Adaptec RAID 6405 The Adaptec R AID 6405 is a SAS RAID co ntroller with these features: Form F actor Low-profile MD2 Bus compatibility PCIe Gen2 PCIe bus width x8 Data transfer rate 6 Gb/s per por t Phys (Unified Serial P or ts) 4 Standard cache 512 MB DDR2 Connectors, inter nal 1 mini-SAS x4 ...
-
Adaptec 2268300R - page 35
Chapter 3: About Y our RAID Controller ● 34 About the Adaptec RAID 6445 The Adaptec R AID 6445 is a SAS RAID co ntroller with these features: Form F actor Low-profile MD2 Bus compatibility PCIe Gen2 PCIe bus width x8 Data transfer rate 6 Gb/s per por t Phys (Unified Serial P or ts) 8 Standard cache 512 MB DDR2 Connectors 1 mini-SAS x4 (SFF-8087) ...
-
Adaptec 2268300R - page 36
Chapter 3: About Y our RAID Controller ● 35 About the Adaptec RAID 6805/6805Q The Adaptec R AID 6805/6805Q is a SAS RAID controlle r with these features: Form F actor Low-profile MD2 Bus compatibility PCIe Gen2 PCIe bus width x8 Data transfer rate 6 Gb/s per por t Phys (Unified Serial P or ts) 8 Standard cache 512 MB DDR2 Connectors, inter nal 2 ...
-
Adaptec 2268300R - page 37
Chapter 3: About Y our RAID Controller ● 36 About the Adaptec RAID 6405E The Ad aptec RAID 6405E is a SAS R AID contr oller with these features: Form F actor Low-profile MD2 (reduced length: 5.12 inches ) Bus compatibility PCIe Gen2 PCIe bus width x1 Data transfer rate 6 Gb/s per por t Phys (Unified Serial P or ts) 4 Standard cache 128 MB DDR2 Co ...
-
Adaptec 2268300R - page 38
Chapter 3: About Y our RAID Controller ● 37 About the Adaptec RAID 6805E The Ad aptec RAID 6805E is a SAS R AID contr oller with these features: Form F actor Low-profile MD2 (reduced length: 6.1 inches) Bus compatibility PCIe Gen2 PCIe bus width x4 Data transfer rate 6 Gb/s per por t Phys (Unified Serial P or ts) 8 Standard cache 128 MB DDR2 Conn ...
-
Adaptec 2268300R - page 39
Chapter 3: About Y our RAID Controller ● 38 About the Adaptec RAID 6405T The Adaptec R AID 6405T is a SAS RAID controller with these features: Form F actor Low-profile MD2 Bus compatibility PCIe Gen2 PCIe bus width x8 Data transfer rate 6 Gb/s per por t Phys (Unified Serial P or ts) 4 Standard cache 512 MB DDR2 Connectors, inter nal 1 mini-SAS x4 ...
-
Adaptec 2268300R - page 40
Chapter 3: About Y our RAID Controller ● 39 About the Adaptec RAID 6805T/6805TQ The Adaptec R AID 6805T/6805T Q is a SAS RAID contr oller with these features: Form F actor Low-profile MD2 Bus compatibility PCIe Gen2 PCIe bus width x8 Data transfer rate 6 Gb/s per por t Phys (Unified Serial P or ts) 8 Standard cache 512 MB DDR2 Connectors, inter n ...
-
Adaptec 2268300R - page 41
4 Getting Star ted In this chapter ... Choosing a RAID Level .................................................................................................... ...... 41 Selecting Disk Drives and Cables ................................................................. ......................... 42 Re placing the Full-H eight Brack et with a Low-P ...
-
Adaptec 2268300R - page 42
Chapter 4: Getting Star ted ● 41 Choosing a RAID Lev el This section provides a brief overvi ew of the RAID levels supported by your A dapt ec RAID contr oller , including the minimum and maximum numbe r of disk drives r equired by each. Note: Before you begin, familiarize yourself with your controller’ s physical features and the RAID levels t ...
-
Adaptec 2268300R - page 43
Chapter 4: Getting Star ted ● 42 Selecting Disk Drives and Cables Disk Drives Y our SAS controller suppor ts SAS disk drives, SA T A disk drives, and S A T A and SA S Solid State Dr i ve s ( S SD s ). Wh en se l e c ti n g di s k d r ive s f or yo ur RA I D ar r ay, en s ur e t h at a l l t h e d i s k d r iv es h ave the same performance level. ...
-
Adaptec 2268300R - page 44
Chapter 4: Getting Star ted ● 43 Cable c onnectors ar e k eyed so that y ou can ’t inse rt them incorrectl y . W e recommend using only A daptec SAS cables. F or more information or to purc hase cables, visit the Adaptec W eb site at www .adaptec.c om . Replacing the F ull-Height Bracke t with a Low -Profile Brack et If y ou are installing your ...
-
Adaptec 2268300R - page 45
Chapter 4: Getting Star ted ● 44 T o replace the full-height bracket with the low-pr ofile bracket: 1 Re mov e the full-height bracket from the c ontr oller board. The full-height bracket is installed on the fr ont side of the c ontrolle r , w ith the mounting scr ews inserted from the back of the controller , as shown i n the Figu re 1. U sing a ...
-
Adaptec 2268300R - page 46
Chapter 4: Getting Star ted ● 45 Installation Options W hen yo u install y our Adapt ec RAID contr oller , you can choose t o create a bootable arra y and then install yo ur operating system and the co ntroller driv er on that array . Alternati vely , you can complet e a standard installation, wher e the contr oller driv er is installed on an exi ...
-
Adaptec 2268300R - page 47
5 Installing the Controller and Disk Drives In this chapter ... Before Y ou Begin ............................................................................................................... ..... 47 Installing the Contr oller ............................................................. ......................................... ... 47 Connectin ...
-
Adaptec 2268300R - page 48
Chapter 5: Installing the Controller and Disk Drives ● 47 Before Y o u Begin ● Rea d Safety Information on page 147 . ● Familiarize yourself with your RAID controller’ s ph ysical features and the RAID levels that it supports (see page 18 ). ● Ensure y ou ha ve the right quantit y of disk drives for the RAID level yo u want to use for you ...
-
Adaptec 2268300R - page 49
Chapter 5: Installing the Controller and Disk Drives ● 48 3 As sho wn at ri ght, insert the RAID controller into the e xpansion slot and press do wn gently but firmly until it clicks int o place. W hen install ed properly , th e RA ID co ntroller should ap pear level with the expansion slot . 4 Secure the b racket in the e xpansio n slot, using t ...
-
Adaptec 2268300R - page 50
Chapter 5: Installing the Controller and Disk Drives ● 49 3 As sho wn at ri ght, insert the RAID controller into the expansion slot and pr ess do wn gently but firmly until it clicks into place. W hen installed properly , the RAID controller should appe ar level with the ex pansion slot . 4 Secure th e bracket in the e xpa nsion slot, using the r ...
-
Adaptec 2268300R - page 51
Chapter 5: Installing the Controller and Disk Drives ● 50 Connecting Disk Drives t o Y our Controllers Y ou can connect SAS disk driv es, SA T A disk drives, and SA T A and SAS Solid State Drives (SSDs) to yo ur Adapt ec RAID contr oller . (See www .adaptec.com/c ompatibility for a list of compatible driv es.) There ar e no jumpers or sw itches t ...
-
Adaptec 2268300R - page 52
Chapter 5: Installing the Controller and Disk Drives ● 51 3 W hen all internal disk driv es hav e been instal led and attac hed to the c ontrolle r , close your computer cabinet, reattach the power cor d, then continue with C onnecting External Dev ices on page 53 . Connecting Drives t o a System Backplane In a backplane connection, disk drives a ...
-
Adaptec 2268300R - page 53
Chapter 5: Installing the Controller and Disk Drives ● 52 Connecting Solid St ate Driv es (SSDs) T o connect a Solid State Driv e to y our co ntroller , use a direct-attached c onnection or a backplane connection. If y our server does not hav e a standar d 2.5-inch driv e tray , y ou must use a bracket/SLED which enables the SSD to fit pro perly ...
-
Adaptec 2268300R - page 54
Chapter 5: Installing the Controller and Disk Drives ● 53 2 U se an int ernal mini-SAS to SA T A cable to attach the SSD(s) t o the controller , as sho wn in the following example. 3 W hen all SSDs hav e been installed and connected, close y our comput er cabinet, reattach the power c ord, then c ontinue wi th Conn ecting Exter nal De vices on pa ...
-
Adaptec 2268300R - page 55
6 Creating a Bootable Ar ra y In this chapter ... Setting the Boot Controller .............................................................................................. ...... 55 Creating an A rray .......................................................................................... .................... ..... 55 Making Y our Array Bootable ...
-
Adaptec 2268300R - page 56
Chapter 6: Creating a Bootable Array ● 55 Setting the Boot Controller Note: If your system won’ t contain more than one bootable controller , skip to the next section, Creating an Array . Y our Ad aptec RAID c ontroller supports bootable disk drives and bootable arrays. T o enable your syst em to boot from either a disk driv e or an array conne ...
-
Adaptec 2268300R - page 57
Chapter 6: Creating a Bootable Array ● 56 4 Select Initialize Drives , then press Ent er . 5 Select at least thr ee disk drives fo r the array , pr ess Inse r t for each selected disk drive, then press Ente r . Cautio n: During initialization, all data is delet ed from the disk. Befo re continuing, back up any da ta you want to k eep. 6 Pr ess Y ...
-
Adaptec 2268300R - page 58
Chapter 6: Creating a Bootable Array ● 57 Creating an Array with Adapt ec St orage Manager This section describes how to use the A dapt ec Storage Manager c onfiguration wizard to build a RA ID 5 arra y . Note: Y ou will need the Adaptec Installation DVD to complete this task. T o create a RAID 5 array: 1 Insert the Adaptec Installation D VD into ...
-
Adaptec 2268300R - page 59
Chapter 6: Creating a Bootable Array ● 58 7 Review the information that is displayed. Note: In DAS en vironments, Adaptec St orage Manager uses the term logical drives when referring to ar rays (see page 13 ). In this example, A dapt ec Storage Manage r has used thirteen equal-sized disk drives t o automaticall y creat e one logical drive with RA ...
-
Adaptec 2268300R - page 60
7 Installing the Driver and an Operating System In this chapter ... Before Y ou Begin ............................................................................................................... ..... 60 Creating a Driv er Disk ....... .............................................................................................. .... .. 60 Insta ...
-
Adaptec 2268300R - page 61
Chapter 7: Installing the Driver and an Operating System ● 60 Before Y o u Begin ● Install and c onnect your A dapt ec RAID c ontroller and int ernal disk driv es (see page 46 ). ● Cr eate a bootab le array (see page 54 ). ● Crea te a driv er disk (see the following section). Note: Not all operating systems are suppor ted on all controllers ...
-
Adaptec 2268300R - page 62
Chapter 7: Installing the Driver and an Operating System ● 61 Installing with Windows Note: Y ou will need your Windows Installation CD to complete this task. Installing with Windows Server 2003 T o install the Ad aptec RAID c ontroll er driver while installing W indows: 1 Insert your W indows CD , then restart the computer . 2 Follo w the on-scr ...
-
Adaptec 2268300R - page 63
Chapter 7: Installing the Driver and an Operating System ● 62 Installing with Red Hat Linux 5 Note: Y ou will need your Red Hat 5 Installation CD to complete this task. T o install the Adapt ec RAID c ontroller driv er while installing R ed Hat Lin ux 5: 1 Insert the first Red Hat Installation CD . 2 Res t a r t yo ur co m pu te r. 3 W hen the R ...
-
Adaptec 2268300R - page 64
Chapter 7: Installing the Driver and an Operating System ● 63 8 T y pe the following commands to c omplete the driv er installation: mkdir /mnt/sysim age/tmp/AACRAID cp -r /AACRAID/* /mnt/s ysimage/tmp/AACR AID chroot /mnt/s ysimage/ cd /tmp/AACRAID sh ./fc-post-ins tall.sh exit 9 Pr ess AL T+F6 to switch back to the installation scr een, finish ...
-
Adaptec 2268300R - page 65
Chapter 7: Installing the Driver and an Operating System ● 64 b Insert and moun t a USB flash d rive: mount /dev/sda1 /mn t/aacraid-driver c Change to the Linux driver director y on the Adaptec Installation DVD , locate the .tgz arch iv e file for your Debian o perating system v ersion (32-bit or 64-b it), then extract the cont ents of the archi ...
-
Adaptec 2268300R - page 66
Chapter 7: Installing the Driver and an Operating System ● 65 11 T y pe the following commands to c omplete the driv er installation: For D eb ia n 32 - bi t: cp -f /AACRAID/aacr aid.ko-POST_MOD /tar get/lib/modules/2 .6.26-2-686/k ernel/ drivers/scsi/ aacraid/aacraid. ko chroot /targe t /sbin/depmod -a 2.6.26-2-68 6 update-initra mfs -u -v exit ...
-
Adaptec 2268300R - page 67
Chapter 7: Installing the Driver and an Operating System ● 66 5 T y pe the following commands to begin loading the drive r: mkdir /mnt2 /AACRAI D mount /dev/sda1 /mn t2 cp -R /mnt2/* /AACRAID umount /mnt2 6 Copy the driv er file to the /lib/m odules directory : cp -f /AACRAID/aacr aid.ko-PRE_MOD /lib/ modules/2.6.< vers ion >-generic/ kerne ...
-
Adaptec 2268300R - page 68
Chapter 7: Installing the Driver and an Operating System ● 67 Installing with Solaris Note: This task is not necessar y if you are insta lling Solaris 10 Update 2 or later . Instead, you can choose to install Solaris using the in-box driver and update it either during or after the installation is complete, if required. Note: F or systems without ...
-
Adaptec 2268300R - page 69
Chapter 7: Installing the Driver and an Operating System ● 68 5 Select Ye s to install a custom driv er , then click Add . 6 Insert the drive r disk, then click OK . 7 Select the driver from the displa yed list, click OK , then follow the on-scr een instructions to load the driver . 8 Complete the VMwar e installation, fo llowing the on-screen in ...
-
Adaptec 2268300R - page 70
Chapter 7: Installing the Driver and an Operating System ● 69 4 Download the VMware ESXi5.0 Standard Softwar e Depot (for example, vmware-ESXi- 5.0.0-469512- depot.zip ) and store in a temporar y location on your W indo ws build machine. Y ou can download the software de pot from the VMware Do wnload Center at www .vmware.c om/d ownloads ; when y ...
-
Adaptec 2268300R - page 71
Chapter 7: Installing the Driver and an Operating System ● 70 f Crea te a cop y of the standard image pr ofile, using the -ClonePr ofile option: # New-EsxImag eProfile -ClonePro file ESXi-5.0.0-4 69512-standar d -Name "ESXi 5.0 Adaptec S eries 6" g Change the vendor and acceptance level of the new image profile: # Set-EsxImagePr ofile - ...
-
Adaptec 2268300R - page 72
Chapter 7: Installing the Driver and an Operating System ● 71 Installing with F reeBSD Note: Y ou will need your FreeBSD Installation CD to c omplete this task. T o install the Adapt ec RAID controller driv er when installing FreeBSD: 1 Insert the Fr eeBSD Installation CD . 2 Res t a r t yo ur co m pu te r. 3 W hen the Fr eeBSD start screen opens ...
-
Adaptec 2268300R - page 73
8 Installing the Driver on an Existing Operating System In this chapter ... Before Y ou Begin ............................................................................................................... ..... 73 Creating a Driv er Disk ....... .............................................................................................. .... .. ...
-
Adaptec 2268300R - page 74
Chapter 8: Installing the Driver on an Existing Operating System ● 73 Before Y o u Begin Before y ou begin, install and connect your A dapt ec RAID controller and int ernal disk drives (see page 4 6 ). Y ou must also create a driv er disk before y ou beg in installing the co ntroller drive r . Note: Not all operating systems are suppor ted on all ...
-
Adaptec 2268300R - page 75
Chapter 8: Installing the Driver on an Existing Operating System ● 74 Installing on Windows Follo w the instructions in this section for your v ersion of W indows. Installing on Windows Server 2003 T o install the dr iv er on W indo ws: 1 Star t or restart Windo ws. Th e Foun d New Hardw are Wiza rd op en s an d s earch es for th e dr iver . 2 In ...
-
Adaptec 2268300R - page 76
Chapter 8: Installing the Driver on an Existing Operating System ● 75 Installing on Debian Linux Note: Y ou must have root privileges to insta ll the driver image. F or Debian Linux, the su command is sufficient. T o install the dr iv er on Debian Linux: 1 Insert and mount the Debian Installation DVD: mount /dev/cdrom /mnt/cdrom 2 Load the Debian ...
-
Adaptec 2268300R - page 77
Chapter 8: Installing the Driver on an Existing Operating System ● 76 Installing on Solaris T o install the dr iv er on Solaris: 1 Star t your c omputer . 2 ( Solaris 10 only ) Check for any pr e-existing A daptec driv er by performing a pkginfo SUNWaac in a terminal window . If there is no pr e-existing A daptec driver on y our com pute r , con ...
-
Adaptec 2268300R - page 78
Chapter 8: Installing the Driver on an Existing Operating System ● 77 2 U sing a r emot e copy utility , copy the driv er VIB file for y our operating syst em v ersion from the Linux driver folder on the installation DVD to a local di rectory on the ESX server . T his example uses Linux scp to c opy the driv er to /tmp/aacraid: VMware ESX 4: scp ...
-
Adaptec 2268300R - page 79
Chapter 8: Installing the Driver on an Existing Operating System ● 78 Installing on F reeBSD T o install the driver on Fr eeBSD: 1 Star t your c omputer . 2 Insert and mount the driver disk: mount -t msdos /dev/fd0 /mnt 3 Copy the driv er package t o the /tmp directory : cp /mnt/aac8x-i3 86.tgz /tmp 4 Install the drive r package: pkg_add /tmp/ aa ...
-
Adaptec 2268300R - page 80
9 Managing Y our Storage Space In this chapter ... About A dapt ec Storage Manager ........................................................................................... 80 About the A daptec RAID Contr oller Configuration U tility ................................................ 80 About the A daptec RAID Configuration U tility .............. ...
-
Adaptec 2268300R - page 81
Chapter 9: Managing Y our Storage Space ● 80 About Adapte c St orage Manager Ad aptec Storage Manage r is a full-featured softwa r e application that helps you build a st orage space for y our online data, using Adapt ec RAID controllers and disk dr iv es. W ith A daptec St orage Manage r , you can gro up disk drives int o logical drives and bui ...
-
Adaptec 2268300R - page 82
Chapter 9: Managing Y our Storage Space ● 81 About the Adaptec RAID Conf iguration Utility The Ad aptec RAID Configuration (AR C) utility is a BIOS-based utility that you can use t o create and manage contr ollers, disk drive s and other devices, and arrays. The AR C utilit y comprises these tools: ● Array Configurat ion Utility (A CU) —F or ...
-
Adaptec 2268300R - page 83
Chapter 9: Managing Y our Storage Space ● 82 ● A dditionally , y ou can use the AR CCONF c o mmand line utility to configure and manage arr ays fr om the VMware ESX console. Fo r information on installing the A dapte c Storage M anager Ag ent and ARCCONF on VMware ESX 4.x syst ems, see the Adaptec S torage M anager U s er’ s Guide and the Com ...
-
Adaptec 2268300R - page 84
10 Solving Problems In this chapter ... T roubleshooting Checklist ............................................................................................... ...... 8 4 Silencing the Alarm .................................................................... ........................................ .... 84 Rec o vering from a Disk Driv e Fail u ...
-
Adaptec 2268300R - page 85
Chapter 10: Solving Problems ● 84 T roubleshooting Checklist If y ou enc ounter difficulties installing or using y our Ad aptec RAID c ontroller , chec k these items fir st: ● W ith y our computer po wer ed off, check the connections t o each disk drive, pow er supply , LED connector , and so on. T r y disconnecting and reconnecting disk driv e ...
-
Adaptec 2268300R - page 86
Chapter 10: Solving Problems ● 85 Reco v ering from a Disk Driv e F ailure This section explains how to r eco ver when a disk driv e fails: ● If the array was pr otected by a hot spare (see page 85 ). ● If the arra y was no t pro tected b y a hot spar e (see page 85 ). ● If ther e is a disk drive failur e in more than one array simultaneous ...
-
Adaptec 2268300R - page 87
Chapter 10: Solving Problems ● 86 If there ar e more disk driv e failures th an hot spares, see F ailed Disk D rive No t Pr otected by a Ho t Spare . If co pyback is enabled, data is mov ed back to its original location once the controller det ects that the failed dr ive has been replaced. Disk Drive F ailure in a RAID 0 Array Becau se RAID 0 vol ...
-
Adaptec 2268300R - page 88
Chapter 10: Solving Problems ● 87 3 Copy the file AFU.ex e (from the Ad ap te c Installation DVD) and the firm war e image files (ty pically *.ufi) to a bootable DOS flopp y di sk, USB flash drive, or writable CD-R OM. Note: Due to space limitations with floppy disks, you ma y need to create multiple floppy disks for each firmware image. 4 P ower ...
-
Adaptec 2268300R - page 89
A Introduction to SAS In this appendix... T erminolog y U sed in This Chapt er ....................................................................................... 89 W hat is SAS? .................................................................................................. ................. ........ 89 Ho w Do SAS Devices Communicate? .... ...
-
Adaptec 2268300R - page 90
Appendix A: Introduction to SAS ● 89 T erminology Used in This Chapter For c on v enienc e, SAS HBAs and SAS R AID contr ollers are r eferred t o generically in this chapte r as SAS cards . HBAs, RAID c ontroller s, disk drives, and ex ternal disk driv e enclosur es are r eferred to as en d dev ices and expanders ar e referred t o as expander dev ...
-
Adaptec 2268300R - page 91
Appendix A: Introduction to SAS ● 90 How Do SAS De vices Communicat e? SAS devices comm unicate with each other thr ough links. A link is a ph ysical connectio n between tw o ph ys. As sho wn in the following figure, SAS dev ices contain ports (see page 91 ), por ts contain phys , and each ph y contains one transmitter and one r eceiv er—one tr ...
-
Adaptec 2268300R - page 92
Appendix A: Introduction to SAS ● 91 What’s a SAS Port? Note: Because the ph ysical link between SAS de vices is from ph y to ph y , rather than por t to por t, a “por t” is more of a vir tual concept, di fferent from what is normally considered a por t on other types of RAID controllers and storage devices. A port is one or more ph ys. A n ...
-
Adaptec 2268300R - page 93
Appendix A: Introduction to SAS ● 92 How are Disk Driv es Identified in SAS? In the BIOS and in the management u tilities (see Ident ify ing Disk Dr ives on page 114 ), disk drives ar e identified in the follo wing formats: ● C N X : D e v Y = D e v ic e Y i s a t t a c h e d to C o n n e c t o r X ( s e e Dir ect -at tac h C onn ecti ons below ...
-
Adaptec 2268300R - page 94
Appendix A: Introduction to SAS ● 93 Some backplanes support daisy-chain e xpansion to other back planes. For e xample, you can daisy-chain (connect one to the next) up t o nine A daptec S50 enclosures to a single SAS card in a host system. SAS Expander Connections A SAS expander device literally expands the numbe r of end dev ices that y ou can ...
-
Adaptec 2268300R - page 95
Appendix A: Introduction to SAS ● 94 How is SAS Different from Parallel SCSI? In summary , althoug h SAS and paral lel SCSI both use the SCSI command set, ho w they move data from one place to another is ve r y different. T o suppor t point-to-point ser ial data transpor t, SAS introduces new types of connectors, cables, connection options, and t ...
-
Adaptec 2268300R - page 96
B Under standing RAID In this appendix... U nderstanding Driv e Segments ............................................................................................. 96 N on-redundant Arrays (RAID 0) .......................................................................................... 96 RAID 1 Arrays .................... .................... ...
-
Adaptec 2268300R - page 97
Appendix B: Understanding RAID ● 96 Understanding Drive Segments A drive s egme nt is a disk dr iv e or portion of a disk dr iv e that is used to cr eate an array . A disk drive can incl ude both RAID segments (segments that are part of an arr ay) and a vailable segments. Ea ch segment c an be part of only one lo gical dev ice at a time. If a dis ...
-
Adaptec 2268300R - page 98
Appendix B: Understanding RAID ● 97 RAID 1 Arra ys A RAID 1 array is built fr om tw o disk drives, whe re one disk dri ve is a mirror of the other (the same data is stored on each disk driv e). Comp ar ed to independ ent disk driv es, RAID 1 arrays pro vide improv ed performance, with twice the read rate and an equal write rate of sing le disks. ...
-
Adaptec 2268300R - page 99
Appendix B: Understanding RAID ● 98 RAID 10 Arra ys A R AI D 10 ar r ay is b ui lt f rom tw o o r m or e e qu a l- si ze d RA ID 1 ar r ay s. D at a i n a R AI D 10 ar r ay is both str iped and mi rrored. Mirroring provides data protection, and striping i mpro ves performance. Drive segment size is limited t o the size of the smallest disk drive ...
-
Adaptec 2268300R - page 100
Appendix B: Understanding RAID ● 99 RAID 5 Arra ys A RAID 5 array is bui lt from a minimum of t hree disk driv es, and uses da ta striping and parity data to pr ovide r edundancy . P arity data pro vides data protectio n, and striping improv es performance. P arity data is an er ror -c orrecting redundancy that’ s used to r e-create data if a d ...
-
Adaptec 2268300R - page 101
Appendix B: Understanding RAID ● 100 RAID 5EE Arra ys A RAID 5EE array—also known as a hot space —is similar to a RAID 5 array e xc ept that it includes a distributed spare drive and must be built from a minimum of four disk driv es. U nlik e a hot spare, a distributed spar e is stripe d evenly acr oss the disk drives with the stor ed data an ...
-
Adaptec 2268300R - page 102
Appendix B: Understanding RAID ● 101 RAID 50 Arra ys A RAID 50 array is built fr om six to forty-eig ht disk driv es configur ed as two or more RAID 5 arrays, and stripes stored dat a and parity data across all disk drives i n both RAID 5 arrays. (F or more inf ormation, see RAID 5 A r ra ys on page 99 .) The parit y data provides data protection ...
-
Adaptec 2268300R - page 103
Appendix B: Understanding RAID ● 102 RAID 6 Arra ys A RAID 6 array—also known as dual drive fail ure prot ection—is similar to a RAID 5 array because it uses data striping and par ity data to provide redundancy . Ho weve r , RAID 6 arr ays include tw o inde pendent sets of parity data instead of one. Both sets of par ity data are striped sepa ...
-
Adaptec 2268300R - page 104
Appendix B: Understanding RAID ● 103 Selecting the Best RAID Le vel U se this table t o select the RAID lev els that are most appro priate for the logical drives o n your storage space, based on the numbe r of available disk driv es and y our requir ements for performance and r eliability . Disk drive usage, read performanc e, and wr ite performa ...
-
Adaptec 2268300R - page 105
C Using the Adaptec RAID Configuration Utility In this appendix... Introduction t o the AR C Utility ...................................................................................... .... 105 R unning the ARC U tilit y...................................................................................................... 10 5 U sing the A CU to ...
-
Adaptec 2268300R - page 106
Appendix C: Using the Adaptec RAID Configuration Utility ● 105 Introduction t o the ARC Utility The AR C utility comprises these tools: ● The Array Configuration U tility (A CU) —F or creating and managing arrays, and initializing and rescanning disk drives (see page 105 ). ● Serial Select —For modifying your c ontr oller and disk driv e ...
-
Adaptec 2268300R - page 107
Appendix C: Using the Adaptec RAID Configuration Utility ● 106 Managing Existing Arra ys T o view or modify existing arrays, select Ma na ge A r ray s from the main A CU menu. Fr om the Manage Arrays me nu, you can: ● V iew the proper ties of an a rray . Note: F ailed drives are displa yed in a different text color . ● Mak e an array bootable ...
-
Adaptec 2268300R - page 108
Appendix C: Using the Adaptec RAID Configuration Utility ● 107 Modifying Cache Settings Y ou can modify the read and wr ite cac he settings for an array . Y ou can also modify the maxCache settings. A dapt ec maxCache uses the co mpatible Soli d State Drives (SSDs) in y our system as a fast r ead cache pool to impr ov e performance in read- inten ...
-
Adaptec 2268300R - page 109
Appendix C: Using the Adaptec RAID Configuration Utility ● 108 Initializing Disk Drives If a disk driv e appears grayed-out ( unavailable for use in a new array), it ma y need to be initialized. T o begin initializing a disk drive, select Init iali ze Dr ives from the main A CU menu. Y ou can initialize one driv e or multiple driv es. If an err o ...
-
Adaptec 2268300R - page 110
Appendix C: Using the Adaptec RAID Configuration Utility ● 109 2 U sing the arro w k eys, select a dr iv e from the list. Existing hot spar es are highlighted. 3 Pr ess Ins to create a new global hot spare. P ress Del t o delete a hot spar e. 4 Pr ess Ente r to sa ve y our changes and r eturn to the main menu. Using the A CU t o Creat e and Manag ...
-
Adaptec 2268300R - page 111
Appendix C: Using the Adaptec RAID Configuration Utility ● 110 2 Select Man ag e Max Ca che P oo l from the A CU main menu. All supported SSDs ar e displa yed. Note: Uninitialized SSDs ma y not appear in the list; see page 108 for more information about initializing drives. 3 U sing the arro w k eys, select a SSD from the list. 4 Pr ess Ins to a ...
-
Adaptec 2268300R - page 112
Appendix C: Using the Adaptec RAID Configuration Utility ● 111 General Controlle r Settings Note: Default settings are shown in bold type. Option Description Drive’ s Write Cache When set to En a ble All, write cache is enabled on all dis k drives on the controller . (Enabling the write cache o verrides an y individual dr ive settings in Adapte ...
-
Adaptec 2268300R - page 113
Appendix C: Using the Adaptec RAID Configuration Utility ● 112 P owe r Management Settings Note: When power management is disabled, no related options will be displa yed. Note: Make sure the operating system driver suppor ts power management. Note: Default settings are shown in bold type. Backplane Mode ● Series 2, Series 5, Series 6 Controller ...
-
Adaptec 2268300R - page 114
Appendix C: Using the Adaptec RAID Configuration Utility ● 113 PHY Settings F ormatting and V erifying Disk Driv es Y ou can use the disk utilities to low-level format or v erify your disk drives. (N ew disk drives are lo w-level formatted at the factory and do not need to be low-level formatted again.) Cautio n: Before you format a disk drive, b ...
-
Adaptec 2268300R - page 115
Appendix C: Using the Adaptec RAID Configuration Utility ● 114 Identif ying Disk Drives Y ou can id entify disk d rives by view ing the list of disk drives on y our system. Only ph ysical drives that displa y during POST are shown. T o identify a disk driv e: 1 Start the ARC utility (see page 105 ). 2 Select the controller y ou want, then press E ...
-
Adaptec 2268300R - page 116
D Using the Adaptec Flash Utility In this appendix... Syst em R equirements ....................................................................................................... .... 1 16 Before Y ou Begin ............................................................................................................... ... 116 R unning the M enu-bas ...
-
Adaptec 2268300R - page 117
Appendix D: Using the Adaptec Flash Utility ● 116 System R equirements ● DOS version 5.0 or later . Note: Y ou can’t run the AFU from a DOS command prompt window under an y version of Windows. ● At least 8 MB of exte nded memor y . Compatibility Notes ● Supports HIMEM.SYS; compatible with other DO S drivers running under HIMEM.SY S (for e ...
-
Adaptec 2268300R - page 118
Appendix D: Using the Adaptec Flash Utility ● 117 Creating the Firmwa re Update Disks T o create the firm ware updat e disks: 1 Copy these files t o empty , formatted floppy disk s, a USB flash drive, or a writable CD: ● AFU.ex e ● Ax xxx 01.ufi where xxx is the model number of y our contr oller . Note: Most controller model numbers have a su ...
-
Adaptec 2268300R - page 119
Appendix D: Using the Adaptec Flash Utility ● 118 7 Complete the flash operation and restar t your co mputer before try ing to use the RAID contr oller again. ( Y ou can not use your RAID c ontroller while you ar e updating its flash.) The AFU proc esses the selected command, pr ompt s y ou to insert additional floppy disks as needed, and reports ...
-
Adaptec 2268300R - page 120
Appendix D: Using the Adaptec Flash Utility ● 119 These switches are a vailable: ● /C <Controller ID> —O ne or m ore RAI D co nt rol ler ID s re pres en ti ng t he se t of RA ID contr ollers on which t o perform the specified c ommand. The default is 0; if the c ompute r has multiple RAID contro llers, the AFU defa ults to contr oller 0 ...
-
Adaptec 2268300R - page 121
Appendix D: Using the Adaptec Flash Utility ● 120 Ve r i f y Compar es the cont ents of each of the flash c omponents on a RAID c ontroller to the correspo nding image in a UFI file, and indicates whether they matc h. Aft er using the VERIFY command, y ou must r estart the comput er . The command syntax for the VERIFY co mmand is as follows: AFU ...
-
Adaptec 2268300R - page 122
Appendix D: Using the Adaptec Flash Utility ● 121 Updating the Flash Using the AFU Command Line 1 Crea te the firm ware update disks (see page 117 ). 2 Shut down your operating system and reboot to DOS from a bootable D OS floppy disk or from a DOS part ition on a bootable drive. (Y ou can use a disk connected to the c ontroller you ’ r e updat ...
-
Adaptec 2268300R - page 123
E Controller LED and I2C Connector Quick Reference In this appendix... Ad aptec RAID 5085 LED Connector Specification ............................................................ 123 Ad aptec RAID 5405/5405Z LED and I2C C onnector Specification .................................. 125 Ad aptec RAID 5445/5445Z LED and I2C C onnector Specification .... ...
-
Adaptec 2268300R - page 124
Appendix E: Controller LED and I2C Connector Quick Reference ● 123 Adapte c RAID 5085 LED Connect or Specification ● A daptec RAID 5085 A ctiv ity LED Header Connecto r: M olex 10-89- 7162 or equivalent ● A ctivity LED H ead er M ating C able Conn ector: M olex 22-55-2161 or equivalent J2: ● A daptec RAID 5085 Aggregate A ctivit y LED Board ...
-
Adaptec 2268300R - page 125
Appendix E: Controller LED and I2C Connector Quick Reference ● 124 J12: ● A daptec RAID 5085 Status LED Board Connector: Molex 10- 89-7162 or equivalent ● Status LED Mating Cable Co nnector: M olex 22-55-2161 or equi valent J14: J12 Pin Number Signal Description 2 ~2kHz Squa re W ave Open collector tran sistor 1+ 3 . 3 V J14 Pin Number Signal ...
-
Adaptec 2268300R - page 126
Appendix E: Controller LED and I2C Connector Quick Reference ● 125 Adapte c RAID 5405/5 405Z LED and I2C Connect or Specification ● A daptec RAID 5405/5405Z A ctiv ity LED Header Connector: M olex 1 0-89-7162 or equivalent ● A ctivity LED H ead er M ating C able Conn ector: M olex 22-55-2161 or equi valent J2: ● A daptec RAID 5405/5405Z Agg ...
-
Adaptec 2268300R - page 127
Appendix E: Controller LED and I2C Connector Quick Reference ● 126 J4: ● A daptec RAID 5405 Status LED Board Connector: Molex 10- 89-7162 or equivalent ● Status LED Mating Cable Co nnector: M olex 22-55-2161 or eq uivalent J14 (A daptec RAID 5405 only): Adapte c RAID 5445/5 445Z LED and I2C Connect or Specification ● A daptec RAID 5445/5445 ...
-
Adaptec 2268300R - page 128
Appendix E: Controller LED and I2C Connector Quick Reference ● 127 ● A daptec RAID 5445/5445Z Aggregate A ctiv ity LED Bo ard Connecto r : Molex 22-28-4023 or equivalent ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J1: ● A daptec RAID 5445/5445Z External Alarm Connector: M olex 22-28-4023 or equivalent ● Alarm ...
-
Adaptec 2268300R - page 129
Appendix E: Controller LED and I2C Connector Quick Reference ● 128 J14 (A daptec RAID 5445 only): Adapte c RAID 5805/5805Q/5805Z/5805ZQ LED and I2C Connect or Specification ● A daptec RAID 5805/5805Q/5805Z/5805ZQ A ctiv ity LE D H eade r Co nnect or: M olex 10- 89-7162 or equivalent ● A ctivity LED H ead er M ating C able Conn ector: M olex 2 ...
-
Adaptec 2268300R - page 130
Appendix E: Controller LED and I2C Connector Quick Reference ● 129 ● A daptec RAID 5805/5805Q/5805Z/5805ZQ A ggregate A ctiv ity LED Board Connector : M olex 22-28-4023 or equivalent ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J1: ● A daptec RAID 5805/5805Q/5805Z/5805ZQ Ext ernal Alar m Connector: Mole x 22-28- ...
-
Adaptec 2268300R - page 131
Appendix E: Controller LED and I2C Connector Quick Reference ● 130 J5: ● A daptec RAID 5805/5805Q Status LED Board Connector: Molex 10-89-7162 or equivalent ● Status LED Mating Cable Co nnector: M olex 22-55-2161 or eq uivalent J14 (A daptec RAID 5805/5805Q only): Adapte c RAID 5 12 45 LED and I2C Connect or Specification ● A daptec RAID 51 ...
-
Adaptec 2268300R - page 132
Appendix E: Controller LED and I2C Connector Quick Reference ● 131 J3: ● A daptec RAID 51245 A ctiv ity LED Bo ard Connector f or CN2: M olex 10-89-7162 or equivalent ● A ctivity LED M ating Ca ble Co nnecto r : Molex 22- 55-2161 or equivalent J1: J3 Pin Number Signal Description 22-55-2161 Pin Number 1 +3.3V LED Anode 2 2 ACTIVITY CN1, LA NE ...
-
Adaptec 2268300R - page 133
Appendix E: Controller LED and I2C Connector Quick Reference ● 132 ● A daptec RAID 51245 Aggregate A ctivit y LED Board Connector : Mole x 22-28-4023 or equivalent ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J10: ● A daptec RAID 51245 External Alarm Connector : M olex 22-28-4023 or equi valent ● Alarm Mating ...
-
Adaptec 2268300R - page 134
Appendix E: Controller LED and I2C Connector Quick Reference ● 133 ● A daptec RAID 51645 A ctiv ity LED Board Connector for CN2/CN3 : M olex 10-89-7162 or equivalent ● A ctivity LED M ating Ca ble Co nnecto r : Molex 22- 55-2161 or equivalent J1: ● A daptec RAID 51645 Aggregate A ctivit y LED Board Connector : Mole x 22-28-4023 or equivalen ...
-
Adaptec 2268300R - page 135
Appendix E: Controller LED and I2C Connector Quick Reference ● 134 J10: ● A daptec RAID 51645 External Alarm Connector : M olex 22-28-4023 or equi valent ● Alarm Mating Cable Connecto r: Molex 50-57- 9002 or equivalent J12: ● A daptec RAID 51645 I2C Board Connector: Molex 22-43- 6030 or equivalent ● I2C Mating Cable Connect or: Molex 22-4 ...
-
Adaptec 2268300R - page 136
Appendix E: Controller LED and I2C Connector Quick Reference ● 135 ● A daptec RAID 52445 A ctiv ity LED Board Connector for CN2/CN3 : M olex 10-89-7162 or equivalent ● A ctivity LED M ating Ca ble Co nnecto r : Molex 22- 55-2161 or equivalent J1: ● A daptec RAID 52445 A ctiv ity LED Header Connector f or CN4/CN5: Molex 10-89-7162 or equival ...
-
Adaptec 2268300R - page 137
Appendix E: Controller LED and I2C Connector Quick Reference ● 136 ● A daptec RAID 52445 Aggregate A ctivit y LED Board Connector : Mole x 22-28-4023 or equivalent ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J10: ● A daptec RAID 52445 External Alarm Connector : M olex 22-28-4023 or equi valent ● Alarm Mating ...
-
Adaptec 2268300R - page 138
Appendix E: Controller LED and I2C Connector Quick Reference ● 137 Adapte c RAID 2045 LED Connect or Specification ● A daptec RAID 2045 Aggregate A ctivit y LED Board Connector : Mole x 22-28-4023 or equivalent ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J1: Adapte c RAID 2 405/2 405Q LED and I2C Connect or Speci ...
-
Adaptec 2268300R - page 139
Appendix E: Controller LED and I2C Connector Quick Reference ● 138 J1: ● A daptec RAID 2405/2405Q I2C Board Connector: M olex 22-43-6030 or equi valent ● I2C Mating Cable Connect or: Molex 22-43-303 0 or equivalent J4: Adapte c RAID 2805 LED and I2C Connect or Specification ● A daptec RAID 2805 A ctiv ity LED Header Connecto r: M olex 10-89 ...
-
Adaptec 2268300R - page 140
Appendix E: Controller LED and I2C Connector Quick Reference ● 139 ● A daptec RAID 2805 Aggregate A ctivit y LED Board Connector : Mole x 22-28-4023 or equivalent ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J1: ● A daptec RAID 2805 I2C CN0 Board Connector: Molex 22-43-603 0 or equivalent ● I2C Mating Cable Co ...
-
Adaptec 2268300R - page 141
Appendix E: Controller LED and I2C Connector Quick Reference ● 140 ● A daptec RAID 6405/6445 Aggregate A ctiv ity LED Bo ard Co nnector : Molex 22-28-4023 or equivalent ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J1: ● A daptec RAID 6405/6445 External Alarm Connector: Molex 22-28-4023 or equivale nt ● Alarm M ...
-
Adaptec 2268300R - page 142
Appendix E: Controller LED and I2C Connector Quick Reference ● 141 Adapte c RAID 6805/6805Q LED and I2C Connect or Specification ● A daptec RAID 6805/6805Q A ctivi ty LED Header C onnector: Molex 22-43-6030 or equivalent ● A ctivity LED H ead er M ating C able Conn ector: M olex 22-55-2161 or equi valent J2: ● A daptec RAID 6805/6805Q Aggre ...
-
Adaptec 2268300R - page 143
Appendix E: Controller LED and I2C Connector Quick Reference ● 142 J12: ● A daptec RAID 6805/6805Q I2C CN0 Board Connector: Mo lex 22-43-6030 or equivalent ● I2C Mating Cable Connect or: Molex 22-43-303 0 or equivalent J4: ● A daptec RAID 6805/6805Q I2C CN1 Board Connector: Mo lex 22-43-6030 or equivalent ● I2C Mating Cable Connect or: Mo ...
-
Adaptec 2268300R - page 144
Appendix E: Controller LED and I2C Connector Quick Reference ● 143 ● A daptec RAID 6405E Aggregate A ctiv ity LED Board Connector : Molex 22-28-4023 or equivalent ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J1: ● A daptec RAID 6405E External Alarm Connector: Molex 22-28-4023 or equivale nt ● Alarm Mating Cabl ...
-
Adaptec 2268300R - page 145
Appendix E: Controller LED and I2C Connector Quick Reference ● 144 ● A daptec RAID 6805E Aggregate A ctiv ity LED Board Connector : Molex 22-28-4023 or equivalent ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J1: ● A daptec RAID 6805E External Alarm Connector: Molex 22-28-4023 or equivale nt ● Alarm Mating Cabl ...
-
Adaptec 2268300R - page 146
Appendix E: Controller LED and I2C Connector Quick Reference ● 145 ● A daptec RAID 6405T Aggregate Activity LED B oard Connector : Molex 22-2 8-4023 or equivalent ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J1: ● A daptec RAID 6405T External Alar m Connector: Molex 22 -28-4023 or equivalent ● Alarm Mating Cab ...
-
Adaptec 2268300R - page 147
Appendix E: Controller LED and I2C Connector Quick Reference ● 146 ● A daptec RAID 6805T/6805T Q Aggregate A ctiv ity LED Board Connector : Mole x 22-28- 4023 or equivale nt ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J1: ● A daptec RAID 6805T/6805T Q External Alarm Connector: M olex 22-28-4023 or equivalent ? ...
-
Adaptec 2268300R - page 148
F Safety Infor mation T o ensure your personal safety and the safet y of your equipment: ● K eep your work ar ea and the compu ter clean and clear of debris. ● Before opening the syst em cabinet, unplug the pow er cor d. Electr ostatic Discharge (ESD) Cautio n: ESD can damage electronic components when they are improperly handled, and can resul ...
-
Adaptec 2268300R - page 149
G T echnical Specifications In this appendix... Envir onmental Specifications .............................................................................................. 149 DC P o wer R equirements ............................................................................... ....................... 149 C urrent Requir ements.................. ...
-
Adaptec 2268300R - page 150
Appendix G: T echnical Specifications ● 149 Environmental Specif ications Note: Adaptec RAID controllers require adequate airflow to operate reliably . The recommended airflow is 200 LFM (linear feet per minute). Forced airflow is recommended. Note: Ambient temperature is measur ed 1” from RAID processor . DC Po wer R equirements Current Requir ...
-
Adaptec 2268300R - page 151
Index A activity LED connector specifications 122 ACU arrays 55 creating arrays 55 , 105 creating bootable arrays 106 initializing d isk drives 108 managing arrays 106 rescanning disk drives 108 secure erasing disk drives 108 stopping a secure erase 108 Adaptec CIM Pr ovider 82 Adaptec customer support 3 Adaptec Flash Utility. See AFU Adaptec RAID ...
-
Adaptec 2268300R - page 152
Index ● 151 activity LED connector specifications 122 Alarm Control setting 111 Array Background Cons istency Check setting 111 , 112 Array-based BBS Support setting 111 array-level features 18 Automa tic Failover s etting 111 CD-ROM Boot Support setting 111 connecting disk drives 50 connecting external devices 53 CRC Checking setting 113 data pr ...
-
Adaptec 2268300R - page 153
Index ● 152 driver installation 78 OS installation 71 H hard disk, hard disk drive, hard drive. See disk drive HDA mode 86 HDA mode jumper 86 hot spares 18 hybrid RAID 18 , 52 I I2C connector specifications 122 initializing disk drives 108 installation backplane 51 controllers 47 creating a driver disk 60 direct-att ach 50 disk driv es 50 driver ...
-
Adaptec 2268300R - page 154
Index ● 153 resetting controllers 86 Runtime BIOS setting 111 S safety inform ation 147 SAS 4-wide ports 91 backplane connections 92 cables 42 comparison to parallel SCSI 94 connectors 91 descri ption 89 direct-attach connections 92 disk driv es 92 edge expanders 93 end devices 89 expander connections 93 expander devices 89 fanout expanders 93 li ...
-
Adaptec 2268300R - page 155
PMC -S ierra , I nc . 1380 Bordeaux Drive Sunnyvale, CA 94089 USA © Copyright PMC-Sierra, Inc. 2011 All rights reserved. Adaptec and the Adaptec by PMC logo are trademarks of PMC-Sierra, Inc. Part Number: CDP-00268-01-A Rev. B JB 12/10 ...
Avez-vous une question à propos de Adaptec 2268300R?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Adaptec 2268300R, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Adaptec 2268300R il est probable qu’il a envie de partager la façon de le résoudre.