Adaptec 2268300Rの取扱説明書

155ページ 3.34 mb
ダウンロード

ページに移動 of 155

Summary
  • Adaptec 2268300R - page 1

    PMC-Sierra Confidential — Preliminary Draft 10/21/11 PMC-Sierra Confidential — Preliminary Draft 10/21/11 Installation and User’ s Guide Ser ial A ttached SCSI RAID C ont r o llers ...

  • Adaptec 2268300R - page 2

    ● 2 Copyright Copyright © 2011 PMC-Sierra, Inc. All rig hts reserved. The information in this document is proprietary and confidential to PMC-Sierra, Inc., and for its cu stomers’ internal us e. In a ny event, no part of this document may be repr oduced or redistributed in any form without the express written consen t of PMC- Sier ra , Inc. T ...

  • Adaptec 2268300R - page 3

    ● 3 Adaptec by PMC Product Support If y ou hav e questions abou t installing or using y our Adapt ec by PMC pr oduct, check this document first—y ou will find answers t o most of your questions. If you need further assistance, use the support options listed belo w . T o expedite y our serv ice, ha ve y o ur computer in fr ont of you. T ec hnica ...

  • Adaptec 2268300R - page 4

    ● 4 Limited 3-Y ear Hardw are W arranty 1. PMC-S ierra, I nc. (“P MC-Si erra ”) warrants to the pur cha ser o f th is product that it will be free from d efects in material and workmanship for a period of three (3) y ears from the date of pur chase. If the pr oduct should bec ome defectiv e within the warranty p eriod, PMC-Sierra, at its opti ...

  • Adaptec 2268300R - page 5

    ● 5 Regulator y Compliance Statements Federal Communications Commis sion Radio F requency Interference Statement W ARNING: Changes or modifications to this unit not expressly appr oved by the party r esponsible for compliance could void the us er ’s authority to operate the equipment. This equipment has been tested and found to comply with the ...

  • Adaptec 2268300R - page 6

    ● 6 Korean Compliance (KCC) Statement Adaptec by PMC products ar e tested and certified by KCC: KCC-REM-KHK-ASR-6xx 5 The above certification covers the following series: ASR-6805, ASR-6445, A SR-6405 ASR-6805E, ASR-6405E, AS R-6805Q ASR-6805T , ASR-6405T, ASR-6805TQ This equipment is home use (Class B) electr om agnetic wave suitability equipmen ...

  • Adaptec 2268300R - page 7

    Contents 1 About This Guide What You Need to Know Before You Begin ................................................... 13 Terminology Used in this Guide ...................................................................... 13 How to Find More Information ....................................................................... 13 2 Kit Contents and ...

  • Adaptec 2268300R - page 8

    Contents ● 8 About the Adaptec RAID 6445 ......................................................................... 34 About the Adaptec RAID 6805/6805Q ............................................................ 35 About the Adaptec RAID 6405E ...................................................................... 36 About the Adaptec RAID 6805E ...

  • Adaptec 2268300R - page 9

    Contents ● 9 Installing with Red Hat Linux 6 or Fedora Linux ........................................... 62 Installing with SuSE Linux ............................................................................... 63 Installing with Debian Linux ............................................................................ 63 Installing with Ubunt ...

  • Adaptec 2268300R - page 10

    Contents ● 10 A Introduction to SAS Terminology Used in This Chapter ................................................................. 89 What is SAS? ...................................................................................................... 89 How Do SAS Devices Communicate? ........................................................... ...

  • Adaptec 2268300R - page 11

    Contents ● 11 Opening Serial Select .................................................................................. 110 Applying Changes and Exiting ................................................................. 110 Modifying Your Controlle r’s Configuration ........................................... 110 Formatting and Verify ing Disk Dr ...

  • Adaptec 2268300R - page 12

    Contents ● 12 F Safety Information Electrostatic Discharge (ESD) ........................................................................ 147 G Technical Specifications Environmental Spec ifications ......................................................................... 149 DC Power Requirements ................................................. ...

  • Adaptec 2268300R - page 13

    1 About This Guide In this chapter ... W hat Y ou Need t o Kno w Befor e Y ou Begin .......................................................................... 13 T erminolog y U sed in this G uide .............................. .............................................................. 13 Ho w to Find M ore Information ......................... ...

  • Adaptec 2268300R - page 14

    Chapter 1: About This Guide ● 13 What Y ou Need to Kno w Before Y ou Begin Y ou should be familiar w ith comput er hardwar e , data storage, RAID technology , and SAS and Serial A T A (SA T A) technology . (For an introduction to SAS, see page 88 .) Y ou should also be famili ar wit h Direct-Att ached Storage (D AS) concepts and t echnology . Not ...

  • Adaptec 2268300R - page 15

    2 Kit Contents and System Requirements In this chapter ... Kit C ontents ................................................................................ ................................... ......... 15 Syst em R equirements ....................................................................................................... ..... .1 5 This chapt ...

  • Adaptec 2268300R - page 16

    Chapter 2: Kit Contents and System Requirements ● 15 Kit Cont ents ● Ada p te c b y P M C RA I D co n t ro l le r ● Ad aptec Installation D VD (bootable), including co ntroller driv ers, A daptec Storage Manager , AR CCONF command line utility , and documentation ● Cables (N ot all kits contain cables. If y our kit does, the typ e and quant ...

  • Adaptec 2268300R - page 17

    Chapter 2: Kit Contents and System Requirements ● 16 ● DVD- R OM driv e ● Floppy disk driv e, USB flash driv e, or CD burner , for cr eating driv er disks and bootable media ...

  • Adaptec 2268300R - page 18

    3 About Y our RAID Controller In this chapter ... Standard RAID Co ntroller F eatures ...................................................................................... 18 Ad ding a Battery Backup Module ........ ........................................................................... ...... 19 Ad ding a Flash Backup M odule ................ ...

  • Adaptec 2268300R - page 19

    Chapter 3: About Y our RAID Controller ● 18 Standard RAID Controller F eatures ● Support for SAS disk dr iv es, SA T A/SA T A II disk drives, and SA T A and SAS Solid State Drives (SSDs) ● Flash R OM for updates to c ontr oller firm ware, BIOS, and the A dapt ec RAID Configuration utility ● Disk drive ho t-swapping ● E ve nt logging and b ...

  • Adaptec 2268300R - page 20

    Chapter 3: About Y our RAID Controller ● 19 Advanced Data Prot ection Suite Note: The following features are suppor ted on Adaptec Series 5 and Series 6 co ntrollers. Stripe d Mirror s are also suppor ted on Series 2 and Series 6E cont rollers. ● Copyb ack Hot Sp are —Y ou can use this feature to mov e data from a hot spar e back to its origi ...

  • Adaptec 2268300R - page 21

    Chapter 3: About Y our RAID Controller ● 20 About the Adaptec RAID 5085 The Adapt ec RAID 5085 is a SAS RAID co ntroller with these features: Form F actor Low-profile MD2 Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 8 Standard cache 512 MB DDR2 Connectors, external 2 mini-SAS x4 (S ...

  • Adaptec 2268300R - page 22

    Chapter 3: About Y our RAID Controller ● 21 About the Adaptec RAID 5405 The Adaptec R AID 5405 is a SAS RAID co ntroller with these features: Form F actor Low-profile MD2 Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 4 Standard cache 256 MB DDR2 Connectors, inter nal 1 mini-SAS x4 ( ...

  • Adaptec 2268300R - page 23

    Chapter 3: About Y our RAID Controller ● 22 About the Adaptec RAID 5445 The Adaptec R AID 5445 is a SAS RAID co ntroller with these features: Fo rm Fa ctor Low-profile MD2 Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 8 Standard cache 512 MB DDR2 Connectors 1 mini-SAS x4 (SFF-8087) ...

  • Adaptec 2268300R - page 24

    Chapter 3: About Y our RAID Controller ● 23 About the Adaptec RAID 5805/5805Q The Adaptec R AID 5805/5805Q is a SAS RAID controlle r with these features: Form F actor Low-profile MD2 Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 8 Standard cache 512 MB DDR2 Connectors, inter nal 2 m ...

  • Adaptec 2268300R - page 25

    Chapter 3: About Y our RAID Controller ● 24 About the Adaptec RAID 5 1 2 45 The Adaptec R AID 51245 is a SAS RAID co ntroller with these features: Form F actor Full Height, Half Length Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 16 Standard cache 512 MB DDR2 Connectors, Inter nal ...

  • Adaptec 2268300R - page 26

    Chapter 3: About Y our RAID Controller ● 25 About the Adaptec RAID 5 1645 The Adaptec R AID 51645 is a SAS RAID co ntroller with these features: Form F actor Full Height, Half Length Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 20 Standard cache 512 MB DDR2 Connectors, Inter nal 4 ...

  • Adaptec 2268300R - page 27

    Chapter 3: About Y our RAID Controller ● 26 About the Adaptec RAID 52 445 The Adaptec R AID 52445 is a SAS RAID co ntroller with these features: Form F actor Full Height, Half Length Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 28 Standard cache 512 MB DDR2 Connectors, Inter nal 6 ...

  • Adaptec 2268300R - page 28

    Chapter 3: About Y our RAID Controller ● 27 About the Adaptec RAID 5405Z The Adaptec R AID 5405Z is a SAS RAID controlle r with these features: Form F actor Low-profile MD2 Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 4 Standard cache 512 MB DDR2 Connectors, inter nal 1 mini-SAS x4 ...

  • Adaptec 2268300R - page 29

    Chapter 3: About Y our RAID Controller ● 28 About the Adaptec RAID 5445Z The Adaptec R AID 5445Z is a SAS RAID controlle r with these features: Fo rm Fa ctor Low-profile MD2 Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 8 Standard cache 512 MB DDR2 Connectors 1 mini-SAS x4 (SFF-8087 ...

  • Adaptec 2268300R - page 30

    Chapter 3: About Y our RAID Controller ● 29 About the Adaptec RAID 5805Z/5805ZQ The Ad aptec RAID 5805Z/5805Z Q is a SAS RA ID c ontroller with these features: Form F actor Low-profile MD2 Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 8 Standard cache 512 MB DDR2 Connectors, inter n ...

  • Adaptec 2268300R - page 31

    Chapter 3: About Y our RAID Controller ● 30 About the Adaptec RAID 2045 The Adapt ec RAID 2045 is a SAS RAID co ntroller with these features: Form F actor Low-profile MD2 Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 4 Standard cache 128 MB DDR2 Connectors, external 1 mini-SAS x4 (S ...

  • Adaptec 2268300R - page 32

    Chapter 3: About Y our RAID Controller ● 31 About the Adaptec RAID 2 405/2 405Q The Adapt ec RAID 2405/2405Q is a SAS RAID c ontroller with these features: Form F actor Low-profile MD2 Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 4 Standard cache 128 MB DDR2 Connectors, inter nal 1 ...

  • Adaptec 2268300R - page 33

    Chapter 3: About Y our RAID Controller ● 32 About the Adaptec RAID 2805 The Adapt ec RAID 2805 is a SAS RAID co ntroller with these features: Form F actor Low-profile MD2 Bus compatibility PCIe 1.1 PCIe bus width x8 Data transfer rate 3 Gb/s per por t Phys (Unified Serial P or ts) 8 Standard cache 128 MB DDR2 Connectors, inter nal 2 mini-SAS x4 ( ...

  • Adaptec 2268300R - page 34

    Chapter 3: About Y our RAID Controller ● 33 About the Adaptec RAID 6405 The Adaptec R AID 6405 is a SAS RAID co ntroller with these features: Form F actor Low-profile MD2 Bus compatibility PCIe Gen2 PCIe bus width x8 Data transfer rate 6 Gb/s per por t Phys (Unified Serial P or ts) 4 Standard cache 512 MB DDR2 Connectors, inter nal 1 mini-SAS x4 ...

  • Adaptec 2268300R - page 35

    Chapter 3: About Y our RAID Controller ● 34 About the Adaptec RAID 6445 The Adaptec R AID 6445 is a SAS RAID co ntroller with these features: Form F actor Low-profile MD2 Bus compatibility PCIe Gen2 PCIe bus width x8 Data transfer rate 6 Gb/s per por t Phys (Unified Serial P or ts) 8 Standard cache 512 MB DDR2 Connectors 1 mini-SAS x4 (SFF-8087) ...

  • Adaptec 2268300R - page 36

    Chapter 3: About Y our RAID Controller ● 35 About the Adaptec RAID 6805/6805Q The Adaptec R AID 6805/6805Q is a SAS RAID controlle r with these features: Form F actor Low-profile MD2 Bus compatibility PCIe Gen2 PCIe bus width x8 Data transfer rate 6 Gb/s per por t Phys (Unified Serial P or ts) 8 Standard cache 512 MB DDR2 Connectors, inter nal 2 ...

  • Adaptec 2268300R - page 37

    Chapter 3: About Y our RAID Controller ● 36 About the Adaptec RAID 6405E The Ad aptec RAID 6405E is a SAS R AID contr oller with these features: Form F actor Low-profile MD2 (reduced length: 5.12 inches ) Bus compatibility PCIe Gen2 PCIe bus width x1 Data transfer rate 6 Gb/s per por t Phys (Unified Serial P or ts) 4 Standard cache 128 MB DDR2 Co ...

  • Adaptec 2268300R - page 38

    Chapter 3: About Y our RAID Controller ● 37 About the Adaptec RAID 6805E The Ad aptec RAID 6805E is a SAS R AID contr oller with these features: Form F actor Low-profile MD2 (reduced length: 6.1 inches) Bus compatibility PCIe Gen2 PCIe bus width x4 Data transfer rate 6 Gb/s per por t Phys (Unified Serial P or ts) 8 Standard cache 128 MB DDR2 Conn ...

  • Adaptec 2268300R - page 39

    Chapter 3: About Y our RAID Controller ● 38 About the Adaptec RAID 6405T The Adaptec R AID 6405T is a SAS RAID controller with these features: Form F actor Low-profile MD2 Bus compatibility PCIe Gen2 PCIe bus width x8 Data transfer rate 6 Gb/s per por t Phys (Unified Serial P or ts) 4 Standard cache 512 MB DDR2 Connectors, inter nal 1 mini-SAS x4 ...

  • Adaptec 2268300R - page 40

    Chapter 3: About Y our RAID Controller ● 39 About the Adaptec RAID 6805T/6805TQ The Adaptec R AID 6805T/6805T Q is a SAS RAID contr oller with these features: Form F actor Low-profile MD2 Bus compatibility PCIe Gen2 PCIe bus width x8 Data transfer rate 6 Gb/s per por t Phys (Unified Serial P or ts) 8 Standard cache 512 MB DDR2 Connectors, inter n ...

  • Adaptec 2268300R - page 41

    4 Getting Star ted In this chapter ... Choosing a RAID Level .................................................................................................... ...... 41 Selecting Disk Drives and Cables ................................................................. ......................... 42 Re placing the Full-H eight Brack et with a Low-P ...

  • Adaptec 2268300R - page 42

    Chapter 4: Getting Star ted ● 41 Choosing a RAID Lev el This section provides a brief overvi ew of the RAID levels supported by your A dapt ec RAID contr oller , including the minimum and maximum numbe r of disk drives r equired by each. Note: Before you begin, familiarize yourself with your controller’ s physical features and the RAID levels t ...

  • Adaptec 2268300R - page 43

    Chapter 4: Getting Star ted ● 42 Selecting Disk Drives and Cables Disk Drives Y our SAS controller suppor ts SAS disk drives, SA T A disk drives, and S A T A and SA S Solid State Dr i ve s ( S SD s ). Wh en se l e c ti n g di s k d r ive s f or yo ur RA I D ar r ay, en s ur e t h at a l l t h e d i s k d r iv es h ave the same performance level. ...

  • Adaptec 2268300R - page 44

    Chapter 4: Getting Star ted ● 43 Cable c onnectors ar e k eyed so that y ou can ’t inse rt them incorrectl y . W e recommend using only A daptec SAS cables. F or more information or to purc hase cables, visit the Adaptec W eb site at www .adaptec.c om . Replacing the F ull-Height Bracke t with a Low -Profile Brack et If y ou are installing your ...

  • Adaptec 2268300R - page 45

    Chapter 4: Getting Star ted ● 44 T o replace the full-height bracket with the low-pr ofile bracket: 1 Re mov e the full-height bracket from the c ontr oller board. The full-height bracket is installed on the fr ont side of the c ontrolle r , w ith the mounting scr ews inserted from the back of the controller , as shown i n the Figu re 1. U sing a ...

  • Adaptec 2268300R - page 46

    Chapter 4: Getting Star ted ● 45 Installation Options W hen yo u install y our Adapt ec RAID contr oller , you can choose t o create a bootable arra y and then install yo ur operating system and the co ntroller driv er on that array . Alternati vely , you can complet e a standard installation, wher e the contr oller driv er is installed on an exi ...

  • Adaptec 2268300R - page 47

    5 Installing the Controller and Disk Drives In this chapter ... Before Y ou Begin ............................................................................................................... ..... 47 Installing the Contr oller ............................................................. ......................................... ... 47 Connectin ...

  • Adaptec 2268300R - page 48

    Chapter 5: Installing the Controller and Disk Drives ● 47 Before Y o u Begin ● Rea d Safety Information on page 147 . ● Familiarize yourself with your RAID controller’ s ph ysical features and the RAID levels that it supports (see page 18 ). ● Ensure y ou ha ve the right quantit y of disk drives for the RAID level yo u want to use for you ...

  • Adaptec 2268300R - page 49

    Chapter 5: Installing the Controller and Disk Drives ● 48 3 As sho wn at ri ght, insert the RAID controller into the e xpansion slot and press do wn gently but firmly until it clicks int o place. W hen install ed properly , th e RA ID co ntroller should ap pear level with the expansion slot . 4 Secure the b racket in the e xpansio n slot, using t ...

  • Adaptec 2268300R - page 50

    Chapter 5: Installing the Controller and Disk Drives ● 49 3 As sho wn at ri ght, insert the RAID controller into the expansion slot and pr ess do wn gently but firmly until it clicks into place. W hen installed properly , the RAID controller should appe ar level with the ex pansion slot . 4 Secure th e bracket in the e xpa nsion slot, using the r ...

  • Adaptec 2268300R - page 51

    Chapter 5: Installing the Controller and Disk Drives ● 50 Connecting Disk Drives t o Y our Controllers Y ou can connect SAS disk driv es, SA T A disk drives, and SA T A and SAS Solid State Drives (SSDs) to yo ur Adapt ec RAID contr oller . (See www .adaptec.com/c ompatibility for a list of compatible driv es.) There ar e no jumpers or sw itches t ...

  • Adaptec 2268300R - page 52

    Chapter 5: Installing the Controller and Disk Drives ● 51 3 W hen all internal disk driv es hav e been instal led and attac hed to the c ontrolle r , close your computer cabinet, reattach the power cor d, then continue with C onnecting External Dev ices on page 53 . Connecting Drives t o a System Backplane In a backplane connection, disk drives a ...

  • Adaptec 2268300R - page 53

    Chapter 5: Installing the Controller and Disk Drives ● 52 Connecting Solid St ate Driv es (SSDs) T o connect a Solid State Driv e to y our co ntroller , use a direct-attached c onnection or a backplane connection. If y our server does not hav e a standar d 2.5-inch driv e tray , y ou must use a bracket/SLED which enables the SSD to fit pro perly ...

  • Adaptec 2268300R - page 54

    Chapter 5: Installing the Controller and Disk Drives ● 53 2 U se an int ernal mini-SAS to SA T A cable to attach the SSD(s) t o the controller , as sho wn in the following example. 3 W hen all SSDs hav e been installed and connected, close y our comput er cabinet, reattach the power c ord, then c ontinue wi th Conn ecting Exter nal De vices on pa ...

  • Adaptec 2268300R - page 55

    6 Creating a Bootable Ar ra y In this chapter ... Setting the Boot Controller .............................................................................................. ...... 55 Creating an A rray .......................................................................................... .................... ..... 55 Making Y our Array Bootable ...

  • Adaptec 2268300R - page 56

    Chapter 6: Creating a Bootable Array ● 55 Setting the Boot Controller Note: If your system won’ t contain more than one bootable controller , skip to the next section, Creating an Array . Y our Ad aptec RAID c ontroller supports bootable disk drives and bootable arrays. T o enable your syst em to boot from either a disk driv e or an array conne ...

  • Adaptec 2268300R - page 57

    Chapter 6: Creating a Bootable Array ● 56 4 Select Initialize Drives , then press Ent er . 5 Select at least thr ee disk drives fo r the array , pr ess Inse r t for each selected disk drive, then press Ente r . Cautio n: During initialization, all data is delet ed from the disk. Befo re continuing, back up any da ta you want to k eep. 6 Pr ess Y ...

  • Adaptec 2268300R - page 58

    Chapter 6: Creating a Bootable Array ● 57 Creating an Array with Adapt ec St orage Manager This section describes how to use the A dapt ec Storage Manager c onfiguration wizard to build a RA ID 5 arra y . Note: Y ou will need the Adaptec Installation DVD to complete this task. T o create a RAID 5 array: 1 Insert the Adaptec Installation D VD into ...

  • Adaptec 2268300R - page 59

    Chapter 6: Creating a Bootable Array ● 58 7 Review the information that is displayed. Note: In DAS en vironments, Adaptec St orage Manager uses the term logical drives when referring to ar rays (see page 13 ). In this example, A dapt ec Storage Manage r has used thirteen equal-sized disk drives t o automaticall y creat e one logical drive with RA ...

  • Adaptec 2268300R - page 60

    7 Installing the Driver and an Operating System In this chapter ... Before Y ou Begin ............................................................................................................... ..... 60 Creating a Driv er Disk ....... .............................................................................................. .... .. 60 Insta ...

  • Adaptec 2268300R - page 61

    Chapter 7: Installing the Driver and an Operating System ● 60 Before Y o u Begin ● Install and c onnect your A dapt ec RAID c ontroller and int ernal disk driv es (see page 46 ). ● Cr eate a bootab le array (see page 54 ). ● Crea te a driv er disk (see the following section). Note: Not all operating systems are suppor ted on all controllers ...

  • Adaptec 2268300R - page 62

    Chapter 7: Installing the Driver and an Operating System ● 61 Installing with Windows Note: Y ou will need your Windows Installation CD to complete this task. Installing with Windows Server 2003 T o install the Ad aptec RAID c ontroll er driver while installing W indows: 1 Insert your W indows CD , then restart the computer . 2 Follo w the on-scr ...

  • Adaptec 2268300R - page 63

    Chapter 7: Installing the Driver and an Operating System ● 62 Installing with Red Hat Linux 5 Note: Y ou will need your Red Hat 5 Installation CD to complete this task. T o install the Adapt ec RAID c ontroller driv er while installing R ed Hat Lin ux 5: 1 Insert the first Red Hat Installation CD . 2 Res t a r t yo ur co m pu te r. 3 W hen the R ...

  • Adaptec 2268300R - page 64

    Chapter 7: Installing the Driver and an Operating System ● 63 8 T y pe the following commands to c omplete the driv er installation: mkdir /mnt/sysim age/tmp/AACRAID cp -r /AACRAID/* /mnt/s ysimage/tmp/AACR AID chroot /mnt/s ysimage/ cd /tmp/AACRAID sh ./fc-post-ins tall.sh exit 9 Pr ess AL T+F6 to switch back to the installation scr een, finish ...

  • Adaptec 2268300R - page 65

    Chapter 7: Installing the Driver and an Operating System ● 64 b Insert and moun t a USB flash d rive: mount /dev/sda1 /mn t/aacraid-driver c Change to the Linux driver director y on the Adaptec Installation DVD , locate the .tgz arch iv e file for your Debian o perating system v ersion (32-bit or 64-b it), then extract the cont ents of the archi ...

  • Adaptec 2268300R - page 66

    Chapter 7: Installing the Driver and an Operating System ● 65 11 T y pe the following commands to c omplete the driv er installation: For D eb ia n 32 - bi t: cp -f /AACRAID/aacr aid.ko-POST_MOD /tar get/lib/modules/2 .6.26-2-686/k ernel/ drivers/scsi/ aacraid/aacraid. ko chroot /targe t /sbin/depmod -a 2.6.26-2-68 6 update-initra mfs -u -v exit ...

  • Adaptec 2268300R - page 67

    Chapter 7: Installing the Driver and an Operating System ● 66 5 T y pe the following commands to begin loading the drive r: mkdir /mnt2 /AACRAI D mount /dev/sda1 /mn t2 cp -R /mnt2/* /AACRAID umount /mnt2 6 Copy the driv er file to the /lib/m odules directory : cp -f /AACRAID/aacr aid.ko-PRE_MOD /lib/ modules/2.6.< vers ion >-generic/ kerne ...

  • Adaptec 2268300R - page 68

    Chapter 7: Installing the Driver and an Operating System ● 67 Installing with Solaris Note: This task is not necessar y if you are insta lling Solaris 10 Update 2 or later . Instead, you can choose to install Solaris using the in-box driver and update it either during or after the installation is complete, if required. Note: F or systems without ...

  • Adaptec 2268300R - page 69

    Chapter 7: Installing the Driver and an Operating System ● 68 5 Select Ye s to install a custom driv er , then click Add . 6 Insert the drive r disk, then click OK . 7 Select the driver from the displa yed list, click OK , then follow the on-scr een instructions to load the driver . 8 Complete the VMwar e installation, fo llowing the on-screen in ...

  • Adaptec 2268300R - page 70

    Chapter 7: Installing the Driver and an Operating System ● 69 4 Download the VMware ESXi5.0 Standard Softwar e Depot (for example, vmware-ESXi- 5.0.0-469512- depot.zip ) and store in a temporar y location on your W indo ws build machine. Y ou can download the software de pot from the VMware Do wnload Center at www .vmware.c om/d ownloads ; when y ...

  • Adaptec 2268300R - page 71

    Chapter 7: Installing the Driver and an Operating System ● 70 f Crea te a cop y of the standard image pr ofile, using the -ClonePr ofile option: # New-EsxImag eProfile -ClonePro file ESXi-5.0.0-4 69512-standar d -Name "ESXi 5.0 Adaptec S eries 6" g Change the vendor and acceptance level of the new image profile: # Set-EsxImagePr ofile - ...

  • Adaptec 2268300R - page 72

    Chapter 7: Installing the Driver and an Operating System ● 71 Installing with F reeBSD Note: Y ou will need your FreeBSD Installation CD to c omplete this task. T o install the Adapt ec RAID controller driv er when installing FreeBSD: 1 Insert the Fr eeBSD Installation CD . 2 Res t a r t yo ur co m pu te r. 3 W hen the Fr eeBSD start screen opens ...

  • Adaptec 2268300R - page 73

    8 Installing the Driver on an Existing Operating System In this chapter ... Before Y ou Begin ............................................................................................................... ..... 73 Creating a Driv er Disk ....... .............................................................................................. .... .. ...

  • Adaptec 2268300R - page 74

    Chapter 8: Installing the Driver on an Existing Operating System ● 73 Before Y o u Begin Before y ou begin, install and connect your A dapt ec RAID controller and int ernal disk drives (see page 4 6 ). Y ou must also create a driv er disk before y ou beg in installing the co ntroller drive r . Note: Not all operating systems are suppor ted on all ...

  • Adaptec 2268300R - page 75

    Chapter 8: Installing the Driver on an Existing Operating System ● 74 Installing on Windows Follo w the instructions in this section for your v ersion of W indows. Installing on Windows Server 2003 T o install the dr iv er on W indo ws: 1 Star t or restart Windo ws. Th e Foun d New Hardw are Wiza rd op en s an d s earch es for th e dr iver . 2 In ...

  • Adaptec 2268300R - page 76

    Chapter 8: Installing the Driver on an Existing Operating System ● 75 Installing on Debian Linux Note: Y ou must have root privileges to insta ll the driver image. F or Debian Linux, the su command is sufficient. T o install the dr iv er on Debian Linux: 1 Insert and mount the Debian Installation DVD: mount /dev/cdrom /mnt/cdrom 2 Load the Debian ...

  • Adaptec 2268300R - page 77

    Chapter 8: Installing the Driver on an Existing Operating System ● 76 Installing on Solaris T o install the dr iv er on Solaris: 1 Star t your c omputer . 2 ( Solaris 10 only ) Check for any pr e-existing A daptec driv er by performing a pkginfo SUNWaac in a terminal window . If there is no pr e-existing A daptec driver on y our com pute r , con ...

  • Adaptec 2268300R - page 78

    Chapter 8: Installing the Driver on an Existing Operating System ● 77 2 U sing a r emot e copy utility , copy the driv er VIB file for y our operating syst em v ersion from the Linux driver folder on the installation DVD to a local di rectory on the ESX server . T his example uses Linux scp to c opy the driv er to /tmp/aacraid: VMware ESX 4: scp ...

  • Adaptec 2268300R - page 79

    Chapter 8: Installing the Driver on an Existing Operating System ● 78 Installing on F reeBSD T o install the driver on Fr eeBSD: 1 Star t your c omputer . 2 Insert and mount the driver disk: mount -t msdos /dev/fd0 /mnt 3 Copy the driv er package t o the /tmp directory : cp /mnt/aac8x-i3 86.tgz /tmp 4 Install the drive r package: pkg_add /tmp/ aa ...

  • Adaptec 2268300R - page 80

    9 Managing Y our Storage Space In this chapter ... About A dapt ec Storage Manager ........................................................................................... 80 About the A daptec RAID Contr oller Configuration U tility ................................................ 80 About the A daptec RAID Configuration U tility .............. ...

  • Adaptec 2268300R - page 81

    Chapter 9: Managing Y our Storage Space ● 80 About Adapte c St orage Manager Ad aptec Storage Manage r is a full-featured softwa r e application that helps you build a st orage space for y our online data, using Adapt ec RAID controllers and disk dr iv es. W ith A daptec St orage Manage r , you can gro up disk drives int o logical drives and bui ...

  • Adaptec 2268300R - page 82

    Chapter 9: Managing Y our Storage Space ● 81 About the Adaptec RAID Conf iguration Utility The Ad aptec RAID Configuration (AR C) utility is a BIOS-based utility that you can use t o create and manage contr ollers, disk drive s and other devices, and arrays. The AR C utilit y comprises these tools: ● Array Configurat ion Utility (A CU) —F or ...

  • Adaptec 2268300R - page 83

    Chapter 9: Managing Y our Storage Space ● 82 ● A dditionally , y ou can use the AR CCONF c o mmand line utility to configure and manage arr ays fr om the VMware ESX console. Fo r information on installing the A dapte c Storage M anager Ag ent and ARCCONF on VMware ESX 4.x syst ems, see the Adaptec S torage M anager U s er’ s Guide and the Com ...

  • Adaptec 2268300R - page 84

    10 Solving Problems In this chapter ... T roubleshooting Checklist ............................................................................................... ...... 8 4 Silencing the Alarm .................................................................... ........................................ .... 84 Rec o vering from a Disk Driv e Fail u ...

  • Adaptec 2268300R - page 85

    Chapter 10: Solving Problems ● 84 T roubleshooting Checklist If y ou enc ounter difficulties installing or using y our Ad aptec RAID c ontroller , chec k these items fir st: ● W ith y our computer po wer ed off, check the connections t o each disk drive, pow er supply , LED connector , and so on. T r y disconnecting and reconnecting disk driv e ...

  • Adaptec 2268300R - page 86

    Chapter 10: Solving Problems ● 85 Reco v ering from a Disk Driv e F ailure This section explains how to r eco ver when a disk driv e fails: ● If the array was pr otected by a hot spare (see page 85 ). ● If the arra y was no t pro tected b y a hot spar e (see page 85 ). ● If ther e is a disk drive failur e in more than one array simultaneous ...

  • Adaptec 2268300R - page 87

    Chapter 10: Solving Problems ● 86 If there ar e more disk driv e failures th an hot spares, see F ailed Disk D rive No t Pr otected by a Ho t Spare . If co pyback is enabled, data is mov ed back to its original location once the controller det ects that the failed dr ive has been replaced. Disk Drive F ailure in a RAID 0 Array Becau se RAID 0 vol ...

  • Adaptec 2268300R - page 88

    Chapter 10: Solving Problems ● 87 3 Copy the file AFU.ex e (from the Ad ap te c Installation DVD) and the firm war e image files (ty pically *.ufi) to a bootable DOS flopp y di sk, USB flash drive, or writable CD-R OM. Note: Due to space limitations with floppy disks, you ma y need to create multiple floppy disks for each firmware image. 4 P ower ...

  • Adaptec 2268300R - page 89

    A Introduction to SAS In this appendix... T erminolog y U sed in This Chapt er ....................................................................................... 89 W hat is SAS? .................................................................................................. ................. ........ 89 Ho w Do SAS Devices Communicate? .... ...

  • Adaptec 2268300R - page 90

    Appendix A: Introduction to SAS ● 89 T erminology Used in This Chapter For c on v enienc e, SAS HBAs and SAS R AID contr ollers are r eferred t o generically in this chapte r as SAS cards . HBAs, RAID c ontroller s, disk drives, and ex ternal disk driv e enclosur es are r eferred to as en d dev ices and expanders ar e referred t o as expander dev ...

  • Adaptec 2268300R - page 91

    Appendix A: Introduction to SAS ● 90 How Do SAS De vices Communicat e? SAS devices comm unicate with each other thr ough links. A link is a ph ysical connectio n between tw o ph ys. As sho wn in the following figure, SAS dev ices contain ports (see page 91 ), por ts contain phys , and each ph y contains one transmitter and one r eceiv er—one tr ...

  • Adaptec 2268300R - page 92

    Appendix A: Introduction to SAS ● 91 What’s a SAS Port? Note: Because the ph ysical link between SAS de vices is from ph y to ph y , rather than por t to por t, a “por t” is more of a vir tual concept, di fferent from what is normally considered a por t on other types of RAID controllers and storage devices. A port is one or more ph ys. A n ...

  • Adaptec 2268300R - page 93

    Appendix A: Introduction to SAS ● 92 How are Disk Driv es Identified in SAS? In the BIOS and in the management u tilities (see Ident ify ing Disk Dr ives on page 114 ), disk drives ar e identified in the follo wing formats: ● C N X : D e v Y = D e v ic e Y i s a t t a c h e d to C o n n e c t o r X ( s e e Dir ect -at tac h C onn ecti ons below ...

  • Adaptec 2268300R - page 94

    Appendix A: Introduction to SAS ● 93 Some backplanes support daisy-chain e xpansion to other back planes. For e xample, you can daisy-chain (connect one to the next) up t o nine A daptec S50 enclosures to a single SAS card in a host system. SAS Expander Connections A SAS expander device literally expands the numbe r of end dev ices that y ou can ...

  • Adaptec 2268300R - page 95

    Appendix A: Introduction to SAS ● 94 How is SAS Different from Parallel SCSI? In summary , althoug h SAS and paral lel SCSI both use the SCSI command set, ho w they move data from one place to another is ve r y different. T o suppor t point-to-point ser ial data transpor t, SAS introduces new types of connectors, cables, connection options, and t ...

  • Adaptec 2268300R - page 96

    B Under standing RAID In this appendix... U nderstanding Driv e Segments ............................................................................................. 96 N on-redundant Arrays (RAID 0) .......................................................................................... 96 RAID 1 Arrays .................... .................... ...

  • Adaptec 2268300R - page 97

    Appendix B: Understanding RAID ● 96 Understanding Drive Segments A drive s egme nt is a disk dr iv e or portion of a disk dr iv e that is used to cr eate an array . A disk drive can incl ude both RAID segments (segments that are part of an arr ay) and a vailable segments. Ea ch segment c an be part of only one lo gical dev ice at a time. If a dis ...

  • Adaptec 2268300R - page 98

    Appendix B: Understanding RAID ● 97 RAID 1 Arra ys A RAID 1 array is built fr om tw o disk drives, whe re one disk dri ve is a mirror of the other (the same data is stored on each disk driv e). Comp ar ed to independ ent disk driv es, RAID 1 arrays pro vide improv ed performance, with twice the read rate and an equal write rate of sing le disks. ...

  • Adaptec 2268300R - page 99

    Appendix B: Understanding RAID ● 98 RAID 10 Arra ys A R AI D 10 ar r ay is b ui lt f rom tw o o r m or e e qu a l- si ze d RA ID 1 ar r ay s. D at a i n a R AI D 10 ar r ay is both str iped and mi rrored. Mirroring provides data protection, and striping i mpro ves performance. Drive segment size is limited t o the size of the smallest disk drive ...

  • Adaptec 2268300R - page 100

    Appendix B: Understanding RAID ● 99 RAID 5 Arra ys A RAID 5 array is bui lt from a minimum of t hree disk driv es, and uses da ta striping and parity data to pr ovide r edundancy . P arity data pro vides data protectio n, and striping improv es performance. P arity data is an er ror -c orrecting redundancy that’ s used to r e-create data if a d ...

  • Adaptec 2268300R - page 101

    Appendix B: Understanding RAID ● 100 RAID 5EE Arra ys A RAID 5EE array—also known as a hot space —is similar to a RAID 5 array e xc ept that it includes a distributed spare drive and must be built from a minimum of four disk driv es. U nlik e a hot spare, a distributed spar e is stripe d evenly acr oss the disk drives with the stor ed data an ...

  • Adaptec 2268300R - page 102

    Appendix B: Understanding RAID ● 101 RAID 50 Arra ys A RAID 50 array is built fr om six to forty-eig ht disk driv es configur ed as two or more RAID 5 arrays, and stripes stored dat a and parity data across all disk drives i n both RAID 5 arrays. (F or more inf ormation, see RAID 5 A r ra ys on page 99 .) The parit y data provides data protection ...

  • Adaptec 2268300R - page 103

    Appendix B: Understanding RAID ● 102 RAID 6 Arra ys A RAID 6 array—also known as dual drive fail ure prot ection—is similar to a RAID 5 array because it uses data striping and par ity data to provide redundancy . Ho weve r , RAID 6 arr ays include tw o inde pendent sets of parity data instead of one. Both sets of par ity data are striped sepa ...

  • Adaptec 2268300R - page 104

    Appendix B: Understanding RAID ● 103 Selecting the Best RAID Le vel U se this table t o select the RAID lev els that are most appro priate for the logical drives o n your storage space, based on the numbe r of available disk driv es and y our requir ements for performance and r eliability . Disk drive usage, read performanc e, and wr ite performa ...

  • Adaptec 2268300R - page 105

    C Using the Adaptec RAID Configuration Utility In this appendix... Introduction t o the AR C Utility ...................................................................................... .... 105 R unning the ARC U tilit y...................................................................................................... 10 5 U sing the A CU to ...

  • Adaptec 2268300R - page 106

    Appendix C: Using the Adaptec RAID Configuration Utility ● 105 Introduction t o the ARC Utility The AR C utility comprises these tools: ● The Array Configuration U tility (A CU) —F or creating and managing arrays, and initializing and rescanning disk drives (see page 105 ). ● Serial Select —For modifying your c ontr oller and disk driv e ...

  • Adaptec 2268300R - page 107

    Appendix C: Using the Adaptec RAID Configuration Utility ● 106 Managing Existing Arra ys T o view or modify existing arrays, select Ma na ge A r ray s from the main A CU menu. Fr om the Manage Arrays me nu, you can: ● V iew the proper ties of an a rray . Note: F ailed drives are displa yed in a different text color . ● Mak e an array bootable ...

  • Adaptec 2268300R - page 108

    Appendix C: Using the Adaptec RAID Configuration Utility ● 107 Modifying Cache Settings Y ou can modify the read and wr ite cac he settings for an array . Y ou can also modify the maxCache settings. A dapt ec maxCache uses the co mpatible Soli d State Drives (SSDs) in y our system as a fast r ead cache pool to impr ov e performance in read- inten ...

  • Adaptec 2268300R - page 109

    Appendix C: Using the Adaptec RAID Configuration Utility ● 108 Initializing Disk Drives If a disk driv e appears grayed-out ( unavailable for use in a new array), it ma y need to be initialized. T o begin initializing a disk drive, select Init iali ze Dr ives from the main A CU menu. Y ou can initialize one driv e or multiple driv es. If an err o ...

  • Adaptec 2268300R - page 110

    Appendix C: Using the Adaptec RAID Configuration Utility ● 109 2 U sing the arro w k eys, select a dr iv e from the list. Existing hot spar es are highlighted. 3 Pr ess Ins to create a new global hot spare. P ress Del t o delete a hot spar e. 4 Pr ess Ente r to sa ve y our changes and r eturn to the main menu. Using the A CU t o Creat e and Manag ...

  • Adaptec 2268300R - page 111

    Appendix C: Using the Adaptec RAID Configuration Utility ● 110 2 Select Man ag e Max Ca che P oo l from the A CU main menu. All supported SSDs ar e displa yed. Note: Uninitialized SSDs ma y not appear in the list; see page 108 for more information about initializing drives. 3 U sing the arro w k eys, select a SSD from the list. 4 Pr ess Ins to a ...

  • Adaptec 2268300R - page 112

    Appendix C: Using the Adaptec RAID Configuration Utility ● 111 General Controlle r Settings Note: Default settings are shown in bold type. Option Description Drive’ s Write Cache When set to En a ble All, write cache is enabled on all dis k drives on the controller . (Enabling the write cache o verrides an y individual dr ive settings in Adapte ...

  • Adaptec 2268300R - page 113

    Appendix C: Using the Adaptec RAID Configuration Utility ● 112 P owe r Management Settings Note: When power management is disabled, no related options will be displa yed. Note: Make sure the operating system driver suppor ts power management. Note: Default settings are shown in bold type. Backplane Mode ● Series 2, Series 5, Series 6 Controller ...

  • Adaptec 2268300R - page 114

    Appendix C: Using the Adaptec RAID Configuration Utility ● 113 PHY Settings F ormatting and V erifying Disk Driv es Y ou can use the disk utilities to low-level format or v erify your disk drives. (N ew disk drives are lo w-level formatted at the factory and do not need to be low-level formatted again.) Cautio n: Before you format a disk drive, b ...

  • Adaptec 2268300R - page 115

    Appendix C: Using the Adaptec RAID Configuration Utility ● 114 Identif ying Disk Drives Y ou can id entify disk d rives by view ing the list of disk drives on y our system. Only ph ysical drives that displa y during POST are shown. T o identify a disk driv e: 1 Start the ARC utility (see page 105 ). 2 Select the controller y ou want, then press E ...

  • Adaptec 2268300R - page 116

    D Using the Adaptec Flash Utility In this appendix... Syst em R equirements ....................................................................................................... .... 1 16 Before Y ou Begin ............................................................................................................... ... 116 R unning the M enu-bas ...

  • Adaptec 2268300R - page 117

    Appendix D: Using the Adaptec Flash Utility ● 116 System R equirements ● DOS version 5.0 or later . Note: Y ou can’t run the AFU from a DOS command prompt window under an y version of Windows. ● At least 8 MB of exte nded memor y . Compatibility Notes ● Supports HIMEM.SYS; compatible with other DO S drivers running under HIMEM.SY S (for e ...

  • Adaptec 2268300R - page 118

    Appendix D: Using the Adaptec Flash Utility ● 117 Creating the Firmwa re Update Disks T o create the firm ware updat e disks: 1 Copy these files t o empty , formatted floppy disk s, a USB flash drive, or a writable CD: ● AFU.ex e ● Ax xxx 01.ufi where xxx is the model number of y our contr oller . Note: Most controller model numbers have a su ...

  • Adaptec 2268300R - page 119

    Appendix D: Using the Adaptec Flash Utility ● 118 7 Complete the flash operation and restar t your co mputer before try ing to use the RAID contr oller again. ( Y ou can not use your RAID c ontroller while you ar e updating its flash.) The AFU proc esses the selected command, pr ompt s y ou to insert additional floppy disks as needed, and reports ...

  • Adaptec 2268300R - page 120

    Appendix D: Using the Adaptec Flash Utility ● 119 These switches are a vailable: ● /C <Controller ID> —O ne or m ore RAI D co nt rol ler ID s re pres en ti ng t he se t of RA ID contr ollers on which t o perform the specified c ommand. The default is 0; if the c ompute r has multiple RAID contro llers, the AFU defa ults to contr oller 0 ...

  • Adaptec 2268300R - page 121

    Appendix D: Using the Adaptec Flash Utility ● 120 Ve r i f y Compar es the cont ents of each of the flash c omponents on a RAID c ontroller to the correspo nding image in a UFI file, and indicates whether they matc h. Aft er using the VERIFY command, y ou must r estart the comput er . The command syntax for the VERIFY co mmand is as follows: AFU ...

  • Adaptec 2268300R - page 122

    Appendix D: Using the Adaptec Flash Utility ● 121 Updating the Flash Using the AFU Command Line 1 Crea te the firm ware update disks (see page 117 ). 2 Shut down your operating system and reboot to DOS from a bootable D OS floppy disk or from a DOS part ition on a bootable drive. (Y ou can use a disk connected to the c ontroller you ’ r e updat ...

  • Adaptec 2268300R - page 123

    E Controller LED and I2C Connector Quick Reference In this appendix... Ad aptec RAID 5085 LED Connector Specification ............................................................ 123 Ad aptec RAID 5405/5405Z LED and I2C C onnector Specification .................................. 125 Ad aptec RAID 5445/5445Z LED and I2C C onnector Specification .... ...

  • Adaptec 2268300R - page 124

    Appendix E: Controller LED and I2C Connector Quick Reference ● 123 Adapte c RAID 5085 LED Connect or Specification ● A daptec RAID 5085 A ctiv ity LED Header Connecto r: M olex 10-89- 7162 or equivalent ● A ctivity LED H ead er M ating C able Conn ector: M olex 22-55-2161 or equivalent J2: ● A daptec RAID 5085 Aggregate A ctivit y LED Board ...

  • Adaptec 2268300R - page 125

    Appendix E: Controller LED and I2C Connector Quick Reference ● 124 J12: ● A daptec RAID 5085 Status LED Board Connector: Molex 10- 89-7162 or equivalent ● Status LED Mating Cable Co nnector: M olex 22-55-2161 or equi valent J14: J12 Pin Number Signal Description 2 ~2kHz Squa re W ave Open collector tran sistor 1+ 3 . 3 V J14 Pin Number Signal ...

  • Adaptec 2268300R - page 126

    Appendix E: Controller LED and I2C Connector Quick Reference ● 125 Adapte c RAID 5405/5 405Z LED and I2C Connect or Specification ● A daptec RAID 5405/5405Z A ctiv ity LED Header Connector: M olex 1 0-89-7162 or equivalent ● A ctivity LED H ead er M ating C able Conn ector: M olex 22-55-2161 or equi valent J2: ● A daptec RAID 5405/5405Z Agg ...

  • Adaptec 2268300R - page 127

    Appendix E: Controller LED and I2C Connector Quick Reference ● 126 J4: ● A daptec RAID 5405 Status LED Board Connector: Molex 10- 89-7162 or equivalent ● Status LED Mating Cable Co nnector: M olex 22-55-2161 or eq uivalent J14 (A daptec RAID 5405 only): Adapte c RAID 5445/5 445Z LED and I2C Connect or Specification ● A daptec RAID 5445/5445 ...

  • Adaptec 2268300R - page 128

    Appendix E: Controller LED and I2C Connector Quick Reference ● 127 ● A daptec RAID 5445/5445Z Aggregate A ctiv ity LED Bo ard Connecto r : Molex 22-28-4023 or equivalent ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J1: ● A daptec RAID 5445/5445Z External Alarm Connector: M olex 22-28-4023 or equivalent ● Alarm ...

  • Adaptec 2268300R - page 129

    Appendix E: Controller LED and I2C Connector Quick Reference ● 128 J14 (A daptec RAID 5445 only): Adapte c RAID 5805/5805Q/5805Z/5805ZQ LED and I2C Connect or Specification ● A daptec RAID 5805/5805Q/5805Z/5805ZQ A ctiv ity LE D H eade r Co nnect or: M olex 10- 89-7162 or equivalent ● A ctivity LED H ead er M ating C able Conn ector: M olex 2 ...

  • Adaptec 2268300R - page 130

    Appendix E: Controller LED and I2C Connector Quick Reference ● 129 ● A daptec RAID 5805/5805Q/5805Z/5805ZQ A ggregate A ctiv ity LED Board Connector : M olex 22-28-4023 or equivalent ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J1: ● A daptec RAID 5805/5805Q/5805Z/5805ZQ Ext ernal Alar m Connector: Mole x 22-28- ...

  • Adaptec 2268300R - page 131

    Appendix E: Controller LED and I2C Connector Quick Reference ● 130 J5: ● A daptec RAID 5805/5805Q Status LED Board Connector: Molex 10-89-7162 or equivalent ● Status LED Mating Cable Co nnector: M olex 22-55-2161 or eq uivalent J14 (A daptec RAID 5805/5805Q only): Adapte c RAID 5 12 45 LED and I2C Connect or Specification ● A daptec RAID 51 ...

  • Adaptec 2268300R - page 132

    Appendix E: Controller LED and I2C Connector Quick Reference ● 131 J3: ● A daptec RAID 51245 A ctiv ity LED Bo ard Connector f or CN2: M olex 10-89-7162 or equivalent ● A ctivity LED M ating Ca ble Co nnecto r : Molex 22- 55-2161 or equivalent J1: J3 Pin Number Signal Description 22-55-2161 Pin Number 1 +3.3V LED Anode 2 2 ACTIVITY CN1, LA NE ...

  • Adaptec 2268300R - page 133

    Appendix E: Controller LED and I2C Connector Quick Reference ● 132 ● A daptec RAID 51245 Aggregate A ctivit y LED Board Connector : Mole x 22-28-4023 or equivalent ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J10: ● A daptec RAID 51245 External Alarm Connector : M olex 22-28-4023 or equi valent ● Alarm Mating ...

  • Adaptec 2268300R - page 134

    Appendix E: Controller LED and I2C Connector Quick Reference ● 133 ● A daptec RAID 51645 A ctiv ity LED Board Connector for CN2/CN3 : M olex 10-89-7162 or equivalent ● A ctivity LED M ating Ca ble Co nnecto r : Molex 22- 55-2161 or equivalent J1: ● A daptec RAID 51645 Aggregate A ctivit y LED Board Connector : Mole x 22-28-4023 or equivalen ...

  • Adaptec 2268300R - page 135

    Appendix E: Controller LED and I2C Connector Quick Reference ● 134 J10: ● A daptec RAID 51645 External Alarm Connector : M olex 22-28-4023 or equi valent ● Alarm Mating Cable Connecto r: Molex 50-57- 9002 or equivalent J12: ● A daptec RAID 51645 I2C Board Connector: Molex 22-43- 6030 or equivalent ● I2C Mating Cable Connect or: Molex 22-4 ...

  • Adaptec 2268300R - page 136

    Appendix E: Controller LED and I2C Connector Quick Reference ● 135 ● A daptec RAID 52445 A ctiv ity LED Board Connector for CN2/CN3 : M olex 10-89-7162 or equivalent ● A ctivity LED M ating Ca ble Co nnecto r : Molex 22- 55-2161 or equivalent J1: ● A daptec RAID 52445 A ctiv ity LED Header Connector f or CN4/CN5: Molex 10-89-7162 or equival ...

  • Adaptec 2268300R - page 137

    Appendix E: Controller LED and I2C Connector Quick Reference ● 136 ● A daptec RAID 52445 Aggregate A ctivit y LED Board Connector : Mole x 22-28-4023 or equivalent ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J10: ● A daptec RAID 52445 External Alarm Connector : M olex 22-28-4023 or equi valent ● Alarm Mating ...

  • Adaptec 2268300R - page 138

    Appendix E: Controller LED and I2C Connector Quick Reference ● 137 Adapte c RAID 2045 LED Connect or Specification ● A daptec RAID 2045 Aggregate A ctivit y LED Board Connector : Mole x 22-28-4023 or equivalent ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J1: Adapte c RAID 2 405/2 405Q LED and I2C Connect or Speci ...

  • Adaptec 2268300R - page 139

    Appendix E: Controller LED and I2C Connector Quick Reference ● 138 J1: ● A daptec RAID 2405/2405Q I2C Board Connector: M olex 22-43-6030 or equi valent ● I2C Mating Cable Connect or: Molex 22-43-303 0 or equivalent J4: Adapte c RAID 2805 LED and I2C Connect or Specification ● A daptec RAID 2805 A ctiv ity LED Header Connecto r: M olex 10-89 ...

  • Adaptec 2268300R - page 140

    Appendix E: Controller LED and I2C Connector Quick Reference ● 139 ● A daptec RAID 2805 Aggregate A ctivit y LED Board Connector : Mole x 22-28-4023 or equivalent ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J1: ● A daptec RAID 2805 I2C CN0 Board Connector: Molex 22-43-603 0 or equivalent ● I2C Mating Cable Co ...

  • Adaptec 2268300R - page 141

    Appendix E: Controller LED and I2C Connector Quick Reference ● 140 ● A daptec RAID 6405/6445 Aggregate A ctiv ity LED Bo ard Co nnector : Molex 22-28-4023 or equivalent ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J1: ● A daptec RAID 6405/6445 External Alarm Connector: Molex 22-28-4023 or equivale nt ● Alarm M ...

  • Adaptec 2268300R - page 142

    Appendix E: Controller LED and I2C Connector Quick Reference ● 141 Adapte c RAID 6805/6805Q LED and I2C Connect or Specification ● A daptec RAID 6805/6805Q A ctivi ty LED Header C onnector: Molex 22-43-6030 or equivalent ● A ctivity LED H ead er M ating C able Conn ector: M olex 22-55-2161 or equi valent J2: ● A daptec RAID 6805/6805Q Aggre ...

  • Adaptec 2268300R - page 143

    Appendix E: Controller LED and I2C Connector Quick Reference ● 142 J12: ● A daptec RAID 6805/6805Q I2C CN0 Board Connector: Mo lex 22-43-6030 or equivalent ● I2C Mating Cable Connect or: Molex 22-43-303 0 or equivalent J4: ● A daptec RAID 6805/6805Q I2C CN1 Board Connector: Mo lex 22-43-6030 or equivalent ● I2C Mating Cable Connect or: Mo ...

  • Adaptec 2268300R - page 144

    Appendix E: Controller LED and I2C Connector Quick Reference ● 143 ● A daptec RAID 6405E Aggregate A ctiv ity LED Board Connector : Molex 22-28-4023 or equivalent ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J1: ● A daptec RAID 6405E External Alarm Connector: Molex 22-28-4023 or equivale nt ● Alarm Mating Cabl ...

  • Adaptec 2268300R - page 145

    Appendix E: Controller LED and I2C Connector Quick Reference ● 144 ● A daptec RAID 6805E Aggregate A ctiv ity LED Board Connector : Molex 22-28-4023 or equivalent ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J1: ● A daptec RAID 6805E External Alarm Connector: Molex 22-28-4023 or equivale nt ● Alarm Mating Cabl ...

  • Adaptec 2268300R - page 146

    Appendix E: Controller LED and I2C Connector Quick Reference ● 145 ● A daptec RAID 6405T Aggregate Activity LED B oard Connector : Molex 22-2 8-4023 or equivalent ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J1: ● A daptec RAID 6405T External Alar m Connector: Molex 22 -28-4023 or equivalent ● Alarm Mating Cab ...

  • Adaptec 2268300R - page 147

    Appendix E: Controller LED and I2C Connector Quick Reference ● 146 ● A daptec RAID 6805T/6805T Q Aggregate A ctiv ity LED Board Connector : Mole x 22-28- 4023 or equivale nt ● Aggregate LED Mating Cable Connector : Mole x 50-57-9002 or equivale nt J1: ● A daptec RAID 6805T/6805T Q External Alarm Connector: M olex 22-28-4023 or equivalent ? ...

  • Adaptec 2268300R - page 148

    F Safety Infor mation T o ensure your personal safety and the safet y of your equipment: ● K eep your work ar ea and the compu ter clean and clear of debris. ● Before opening the syst em cabinet, unplug the pow er cor d. Electr ostatic Discharge (ESD) Cautio n: ESD can damage electronic components when they are improperly handled, and can resul ...

  • Adaptec 2268300R - page 149

    G T echnical Specifications In this appendix... Envir onmental Specifications .............................................................................................. 149 DC P o wer R equirements ............................................................................... ....................... 149 C urrent Requir ements.................. ...

  • Adaptec 2268300R - page 150

    Appendix G: T echnical Specifications ● 149 Environmental Specif ications Note: Adaptec RAID controllers require adequate airflow to operate reliably . The recommended airflow is 200 LFM (linear feet per minute). Forced airflow is recommended. Note: Ambient temperature is measur ed 1” from RAID processor . DC Po wer R equirements Current Requir ...

  • Adaptec 2268300R - page 151

    Index A activity LED connector specifications 122 ACU arrays 55 creating arrays 55 , 105 creating bootable arrays 106 initializing d isk drives 108 managing arrays 106 rescanning disk drives 108 secure erasing disk drives 108 stopping a secure erase 108 Adaptec CIM Pr ovider 82 Adaptec customer support 3 Adaptec Flash Utility. See AFU Adaptec RAID ...

  • Adaptec 2268300R - page 152

    Index ● 151 activity LED connector specifications 122 Alarm Control setting 111 Array Background Cons istency Check setting 111 , 112 Array-based BBS Support setting 111 array-level features 18 Automa tic Failover s etting 111 CD-ROM Boot Support setting 111 connecting disk drives 50 connecting external devices 53 CRC Checking setting 113 data pr ...

  • Adaptec 2268300R - page 153

    Index ● 152 driver installation 78 OS installation 71 H hard disk, hard disk drive, hard drive. See disk drive HDA mode 86 HDA mode jumper 86 hot spares 18 hybrid RAID 18 , 52 I I2C connector specifications 122 initializing disk drives 108 installation backplane 51 controllers 47 creating a driver disk 60 direct-att ach 50 disk driv es 50 driver ...

  • Adaptec 2268300R - page 154

    Index ● 153 resetting controllers 86 Runtime BIOS setting 111 S safety inform ation 147 SAS 4-wide ports 91 backplane connections 92 cables 42 comparison to parallel SCSI 94 connectors 91 descri ption 89 direct-attach connections 92 disk driv es 92 edge expanders 93 end devices 89 expander connections 93 expander devices 89 fanout expanders 93 li ...

  • Adaptec 2268300R - page 155

    PMC -S ierra , I nc . 1380 Bordeaux Drive Sunnyvale, CA 94089 USA © Copyright PMC-Sierra, Inc. 2011 All rights reserved. Adaptec and the Adaptec by PMC logo are trademarks of PMC-Sierra, Inc. Part Number: CDP-00268-01-A Rev. B JB 12/10 ...

メーカー Adaptec カテゴリー Computer Hardware

Adaptec 2268300Rのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 2268300Rの取扱説明書
- Adaptecの製品カード
- パンフレット
- またはAdaptec 2268300Rの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Adaptec 2268300Rの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Adaptec 2268300Rの取り付け説明書、サービスマニュアル、簡易説明書、またはAdaptec 2268300Rのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Adaptec 2268300Rの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Adaptec 2268300Rデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがAdaptec 2268300Rを使用するのを助ける技術的文書のことです。説明書は通常、全てのAdaptec 2268300Rユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Adaptecの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Adaptec 2268300Rの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははAdaptec 2268300Rの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Adaptec 2268300Rに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Adaptec 2268300Rデバイスの基本機能を使うにあたってのヒント。 Adaptec 2268300Rのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Adaptec 2268300Rに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるAdaptec 2268300Rのメーカー/サービスへの連絡先に関する情報。

Adaptec 2268300Rについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもAdaptec 2268300Rの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAdaptec 2268300Rで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)