Manuel d’utilisation Anton/Bauer DUAL 2722

15 pages 0.21 mb
Télécharger

Aller à la page of 15

Summary
  • Anton/Bauer DUAL 2722 - page 1

    PowerCharger DUAL 2722 Charger / Power Supply OWNER’S MANUAL ...

  • Anton/Bauer DUAL 2722 - page 2

    ...

  • Anton/Bauer DUAL 2722 - page 3

    TABLE OF CONTENTS INTRODUCTION…………………………………………………………………....1 FEATURES…………………………………………………………………………..1 SAFEGUARDS………………………………………………………………………2 GROUNDING/EARTHING…………………………? ...

  • Anton/Bauer DUAL 2722 - page 4

    INTRODUCTION The DUAL 2722 is a simultaneous 2 position Interactive 2000 PowerCharger fast charger with 70 watt DC camera power supply. It incorporates all of the Logic Series circuits that are employed in ev ery Anton/Bauer charger. The InterActive charge programm ing provides all charge t erm inati on and protection routines for safe, reliable, c ...

  • Anton/Bauer DUAL 2722 - page 5

    SAFEGUARDS Power Sources: This unit was designed to operate at mains vol tages from 90 to 264 Volts AC, 50-60 Hz. Risk of Electrical Shock: Refer servicing to quali fied service personnel. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. GROUNDING/EARTHING IMPORTANT WARNING: THIS APPARATUS MUST BE EARTHED. To ensure saf ...

  • Anton/Bauer DUAL 2722 - page 6

    Charging As with all Anton/Bauer chargers, chargi ng with DUAL 2722 is fully automatic. M ount any Digital Logic Series or Logic Se ries battery to the DUAL 2722 and it will automatically determine the appropriate ch arge routine and execute it. Applications The DUAL 2722 will charge any Anton/Baue r Logic Series Gold Mount battery including model ...

  • Anton/Bauer DUAL 2722 - page 7

    Three Stage Charging Methodology In general, the DUAL 2722 will deliver a three stage charge routine to each battery. 1. Stage One will deliver a high rate charge matched to the capabilities of the battery (typi cally a one or two hour rate , depending on battery t ype). During this stage, six separate cutoff m ethods are in operation, sim ultaneou ...

  • Anton/Bauer DUAL 2722 - page 8

    LED Indications The DUAL 2722 has two sets of two LEDs (one red, one green) and one green st atus LED in the center. The green status LED indicates: Steady green – line voltage is present; Off – line voltage not present.. The red and green charge status LED’s indicat e the charging status of the battery. The following tab le identifies all of ...

  • Anton/Bauer DUAL 2722 - page 9

    1 - - - - - - - 2 - - - - - - - LCD Indications Each PowerCharger’s liquid crystal displa y (LCD) will display the status of each battery, as well as, important PowerCharg er operating indications. The fol lowing information expl ains the indications which appear in t he LCD. The levels of the LCD display on each Powe rCharger can be obtai ned by ...

  • Anton/Bauer DUAL 2722 - page 10

    DDM (DIAGNOSTIC/DISCHARGE MODULE) A standard feature with the DUAL 2722, the DDM completes a battery m anagement system, capable of testin g battery capacity and identifying battery anomalies before they appear in the field. The DDM will perform a standard or a 24 hour test . The standard test is a full charge-discharge-full charge routine , which ...

  • Anton/Bauer DUAL 2722 - page 11

    To Operate The DDM 1. Mount the battery to any position on the PowerCharger. When the PowerCharger has completed its communication with the battery, the ALTERNATING RED and GREEN LEDs will stop and the battery will begin its char ge routine. The battery information and position number will appear on the LCD display. (If the battery is already on th ...

  • Anton/Bauer DUAL 2722 - page 12

    “AUTOCAL” Feature When a DDM is installed in the PowerC harger, a special InterActive m ode is automatically enabled for DIGITAL batteries placed on the PowerCharger at any time. The PowerCharger will interrogate the status of the DIGITAL battery to determine whether the battery has receive d a “learning” cycle or “calibrate” cycle with ...

  • Anton/Bauer DUAL 2722 - page 13

    OPERATION AS DC CAMERA SUPPLY FROM MAINS The DUAL 2722 can operate cameras and camcorders using t he four pin camera output connector located on the back of the DUAL 2722. To power the camera, attach one end of the XLR4 accessory cable (available separately) to the DUAL 2722. Attach the other end to the “DC in” four pin XLR on the camera/camcor ...

  • Anton/Bauer DUAL 2722 - page 14

    FCC NOTICE This equipment has been tested and found to comply with the li mits for a Class A digital device pursuant t o Part 15 of the FCC Rules. These lim its are designed t o provide reasonable protection against harmful interference when the equi pment is operated in a comm ercial environm ent. Th is equipment generat es, uses, and can radiate ...

  • Anton/Bauer DUAL 2722 - page 15

    WARRANTY IMPORTANT: PLEASE MAIL WARRANTY REGISTRATION CARD WITHIN TEN (10) DAYS OF PURCHASE. We must ha ve this card on file with our Custom er Support Group to establish t his warranty. Proper registrati on will also enable us t o provide update inform ation on the battery syst em. All new Anton/Bauer products have been thoroughly tested and i nsp ...

Fabricant Anton/Bauer Catégorie Power Supply

Les documents que nous recevons du fabricant de l'appareilAnton/Bauer DUAL 2722 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Anton/Bauer
- manuels d’utilisations DUAL 2722
- fiches produit Anton/Bauer
- dépliants
- ou étiquettes-énergie Anton/Bauer DUAL 2722
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Anton/Bauer DUAL 2722.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Anton/Bauer DUAL 2722, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Anton/Bauer DUAL 2722. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Anton/Bauer DUAL 2722.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Anton/Bauer DUAL 2722, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Anton/Bauer DUAL 2722 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Anton/Bauer DUAL 2722.

Le manuel d’utilisation complet Anton/Bauer, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Anton/Bauer DUAL 2722 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Anton/Bauer DUAL 2722, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lAnton/Bauer DUAL 2722 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Anton/Bauer DUAL 2722 - qui devraient nous aider dans les premières étapes lors de l'utilisation Anton/Bauer DUAL 2722
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Anton/Bauer DUAL 2722
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Anton/Bauer DUAL 2722 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Anton/Bauer DUAL 2722?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Anton/Bauer DUAL 2722, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Anton/Bauer DUAL 2722 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)