-
Kicker SX900.4 - page 1
...
-
Kicker SX900.4 - page 2
3 SX .4 Series Amplifiers F ea tures F ea tures Low Impedance Operation Stable into 2 ohm stereo or 4 ohm mono loads. SORT Protection Circuitry ( S hort circuit, O ver -voltage, R everse polarity , T hermal) Protects amplifier from accidents and out of spec operation. MOSFET Power Supply Pr ovides high ef ficiency operation. PAST ( P re A mp S igna ...
-
Kicker SX900.4 - page 3
5 SX .4 Series Amplifiers F ea tures VFD DISPLAY - cont GAIN - Indicates you are in the gain menu. EQ - Indicates you are in the equalizer menu. LPF - Indicates you are in the low pass filter menu. HPF - Indicates you are in the high pass filter menu. PHASE - Indicates you are in the phase menu. KOMP - Indicates you are in the Kompressor menu. MEM- ...
-
Kicker SX900.4 - page 4
7 SX .4 Series Amplifiers Installa tion Moun ting When selecting a location to mount your Kicker amplifier be sure it is structurally sound and that ther e are no items behind the area that could be damaged by the screws. Check for wiring, brake lines, fuel lines, gas tanks, etc. All amplifiers generate heat under normal operation. Be sure to choos ...
-
Kicker SX900.4 - page 5
9 SX .4 Series Amplifiers Installa tion S yst em Diagrams FOUR CHANNEL OPERATION (STEREO) SX.4 series amplifiers are capable of operating into a minimum impedance of 2 ohms per channel in stereo operation. R M1 M2 M3 M4 ESC ENT HOME SYS MEM-1 GAIN EQ LPF HPF KOMP AMP1 LOCK MEM-2 MEM-3 MEM-4 PHASE MUTE AMP2 LEFT RIGHT ** kicker L+ L - R+ R - RIGHT S ...
-
Kicker SX900.4 - page 6
11 SX .4 Series Amplifiers Installa tion USING THE SIGNAL OUTPUT JACKS (PAST) The Output ( P re A mp S ignal T ransfer) RCA jacks allow you to send the incoming signal from the AMP 1 RCA input jacks on one Kicker SX.4 series amplifier to another amplifier or proces- sor without the need for Y cables. The signal from the PAST jacks is identical to t ...
-
Kicker SX900.4 - page 7
13 SX .4 Series Amplifiers Opera tion Na viga tion Y our KICKER SX series amplifier uses the latest in Digital DSP control and provides you with valuable operational infor ma- tion about your amplifier , real-time diagnostics and a full multi-level menu-driven operating system to access and adjust your amplifier . The menu system is designed in lay ...
-
Kicker SX900.4 - page 8
15 SX .4 Series Amplifiers Opera tion Menu S yst em The menu system layout is as follows: DEFAULT - This menu is displayed when your amp is operating and no adjustments are being made to your ampli- fier . This information scrolls through the display one after the other and then repeats. 1.) KICKER - Hey , we needed a brand plug for us since this a ...
-
Kicker SX900.4 - page 9
17 SX .4 Series Amplifiers Opera tion SICK BAY - cont 7c.) PINK NOISE is a built in pink noise generator to test operation of the amplifier Use the UP and DOWN keys to select NOISE ON or NOISE OFf . When the PINK NOISE is ON the LEFT and RIGHT indicators in the ISIS VFD will blink on and of f. When you are done using the PINK NOISE generator press ...
-
Kicker SX900.4 - page 10
19 SX .4 Series Amplifiers Opera tion 14.) Komp Adj. - This adjusts the KOMPRESSOR activation threshold point. Range is +24 dB to -24 dB to allow for dif ferent sized speakers or listener tastes. 0 is the default factory setting. There are two KOMP ADJ. menus, one for AMP 1 and one for AMP 2. This allows each amplifier to have its own individual se ...
-
Kicker SX900.4 - page 11
21 SX .4 Series Amplifiers Opera tion 18.) About - This menu item will display information about the DAP (Digital Audio Processor) hardwar e, software and build date. Use the UP and DOWN keys to view the DSP V ersion, Software V ersion, Hardware V ersion and Build Date. Press the ESC key to r eturn to the MAIN menu. Gain MENU - This menu is where y ...
-
Kicker SX900.4 - page 12
23 SX .4 Series Amplifiers Opera tion Lo-Pass MENU - This menu is where you adjust the low pass crossover for each amplifier . There are two LO-P ASS menus, one for AMP 1 and one for AMP 2. This allows each amplifier to have its own individual LO-P ASS setting. Use the UP and DOWN keys to scroll through AMP-1 and AMP-2 and press the ENT key to sele ...
-
Kicker SX900.4 - page 13
25 SX .4 Series Amplifiers Opera tion Phase MENU - Here you can switch the polarity of each amplifier’ s channel(s) output between 0 or 180 degrees. There are two PHASE menus, one for AMP 1 and one for AMP 2. This allows each amplifier to have its own individual PHASE setting. Use the UP and DOWN keys to scroll through AMP-1 and AMP-2 and press t ...
-
Kicker SX900.4 - page 14
27 SX .4 Series Amplifiers Opera tion Kompressor MENU - Here you can select each amplifier’ s Kompressor setting you wish to use. The SX amplifier utilizes a full digital compressor circuit to tweak the amplifier and the sound to your unique needs. There are two KOMPRESSOR menus, one for AMP 1 and one for AMP 2. This allows each amplifier to have ...
-
Kicker SX900.4 - page 15
29 SX .4 Series Amplifiers Opera tion UNLOCK AMPLIFIER - cont. If you enter the wrong code the display will flash the mes- sage BAD CODE and return you to the UNLOCK screen. Press the ENT key to enter your lock your code again. Enter your code again making sure to place the corr ect character in the correct position in the display . Blank spaces co ...
-
Kicker SX900.4 - page 16
31 SX .4 Series Amplifiers Opera tion PRESET PRESETS Ok, we know that sounds like a certain pizza commercial, but seriously the four memory presets come with settings already in them. Y ou can use these as a starting point to do your own tweaking or for quick push-a-button-and-be-done setup. Any preset you store will r eplace the ones that come fro ...
-
Kicker SX900.4 - page 17
33 SX .4 Series Amplifiers Help Alternator n n oise (whining sound that varies with engine RPM) : ¬ Check for damaged RCA cables. ¬ Check routing of RCA cable. ¬ Check source unit for good ground. ¬ Check GAIN RANGE in SYSTEM menu, turn down if set too high. ¬ Check GAIN in MAIN MENU, turn down if set too high. CAUTION: When jump-starting ...
-
Kicker SX900.4 - page 18
35 SX .4 Series Amplifiers Specifica tions P erf ormanc e Model SX700.4 SX900.4 RMS Power In Watts, All Channels Driven @ 13.8V, 4 Ω Stereo, 0.02% THD 82 x 4 107 x 4 @ 13.8V, 2 Ω Stereo, 0.2% THD 163 x 4 213 x 4 @ 13.8V, 4 Ω Mono, 0.4% THD 325 x 2 425 x 2 Dynamic Power In Watts, All Channels Driven @ 14.4V, 4 Ω Stereo, 1% THD 85 x 4 115 x 4 ...
-
Kicker SX900.4 - page 19
37 SX .4 Series Amplifiers Warran ty EL E CTRONICS LIMIT ED WARRAN TY WHA T IS NO T C O V ERED? Kicker warrants this product to be free fr om defects in material and workman- ship under normal use for a period of 90 DAYS from date of original purchase with receipt. When purchased from an Authorized KICKER Dealer it is war ranted for TWO (2) YEARS f ...
-
Kicker SX900.4 - page 20
39 SX .4 Series Amplifiers No t es Chic’s Numbers Hook Ups 38 SX .4 Series Amplifiers No t es No t es Pizza Deliv ery ...
Avez-vous une question à propos de Kicker SX900.4?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Kicker SX900.4, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Kicker SX900.4 il est probable qu’il a envie de partager la façon de le résoudre.