-
Canon WUX5000 - page 1
© 201 1 CANON INC. YT1-1435-001 MUL TIMEDIA PROJECT OR WUX5000 / WUX4000 User Commands Revision 1 ...
-
Canon WUX5000 - page 2
WUX5000 / WUX4000 User Commands - - ii T able of Contents 1. Overview ................................................................................................................. 1 2. Communication S pecifications ................................................................................. 2 Communication Sp ecifications ................. ...
-
Canon WUX5000 - page 3
WUX5000 / WUX4000 User Commands - - iii FREEZE ........................................................................................................................ ............ 36 GAMMA ......................................................................................................................... ........... 37 HDMI_IN ............... ...
-
Canon WUX5000 - page 4
WUX5000 / WUX4000 User Commands - 1 - 1. Overview These specifications describe the method s of controlling both the Projector WUX 5 000 and WUX4000 from the PC over an RS-232C connection or LAN. V irtually all operations possible with the re mote control can be controlled from the P C. The following symbols are used in these specifications: Symbol ...
-
Canon WUX5000 - page 5
WUX5000 / WUX4000 User Commands - 2 - 2. Communication S pecifications Communication S pecifications The projector can be cont rolled via RS-232C or LAN connection. PC - Projector connec tion configuration Item S pecifications Item S pecifications Connecti on system PC and projector connected on a "1:1" basis Connecti on system TCP / IP C ...
-
Canon WUX5000 - page 6
WUX5000 / WUX4000 User Commands - 3 - Usable Character Codes Use ASCII codes in the red and blue areas. No distinction is made between double-byte char acters and single-byte charac ters. Do not use double-byte or triple-byte charac ters. They will all be recogniz ed as single-byte characters. Uppercase and lowercase versions of the same alphab eti ...
-
Canon WUX5000 - page 7
WUX5000 / WUX4000 User Commands - 4 - Communication System (Serial) Item S pecifications Communication system RS-232-C Start-stop synchronization Semi- duplex communication Transmission speed 19.2 Kbps Character length 8 bits / character Stop bit 2 bits Parity No ne Transmission format Variable-length re cords with terminals as delimiters Maximum t ...
-
Canon WUX5000 - page 8
WUX5000 / WUX4000 User Commands - 5 - Commands T ransmissions sent from the PC to the projector . T ransmission format △ <Command character strings> △ <Delimiter> <Command character st rings> Character string s consisting of 0 or more alphanumeric characters. <Delimiters> One of CR (0Dh), LF (0Ah), CR+LF (0Dh+0Ah), Null ...
-
Canon WUX5000 - page 9
WUX5000 / WUX4000 User Commands - 6 - Response T ransmissions sent from the Projector to th e PC in response to commands from the PC. T ransmission format <Response character string> <Delimiter> <Response character string > Character strings co nsisting of one or more ASCII characters. The first two characters are always one lower ...
-
Canon WUX5000 - page 10
WUX5000 / WUX4000 User Commands - 7 - Other T ransmission recognition On the receiving side (the Projector), the data that is able to be received within the character interval of T c is held, and the transmission is consid ered received when the delimiter is received. If the character inter val received exceeds the T c or if a delimiter is n ot rec ...
-
Canon WUX5000 - page 11
WUX5000 / WUX4000 User Commands - 8 - 3. Communication Flow T ransmission sent At the PC, the transmission is se nt within character intervals of T c (character interval timeout). T ransmission received At the Projector , the data that is able to be received within the character interval of T c is held, and the transmission is considered received w ...
-
Canon WUX5000 - page 12
WUX5000 / WUX4000 User Commands - 9 - 4. Command System ...
-
Canon WUX5000 - page 13
WUX5000 / WUX4000 User Commands - 10 - ...
-
Canon WUX5000 - page 14
WUX5000 / WUX4000 User Commands - 1 1 - 5. Command List Item Commands Description 1 6AXADJ 6-axis adjustment ON / OFF 2 6AXR-Y 6-axis correction R-Y hue / saturation settings 3 AMBADJ Ambient light correction adjustment ON / OFF 4 AMBLEVEL Ambient li ght level settings 5 AMBTYPE Ambient light type settings 6 ASPECT Screen settings 7 AUTOPC Auto PC ...
-
Canon WUX5000 - page 15
WUX5000 / WUX4000 User Commands - 12 - Item Commands Description 36 NR Noise reduction 37 POWER This controls the power supply 38 PRODCODE Product information inquiry 39 RC Remote control operation emu late 40 RGBGAIN RGB gain a djustment 41 RGBOFFSET RGB offset adjustment 42 ROMVER ROM version inquiry 43 SAT Color satura tion setting 44 SAVEIMGPRO ...
-
Canon WUX5000 - page 16
WUX5000 / WUX4000 User Commands - 13 - 6. Details of Commands Descriptions of each comm and are prov ided starting from the next page. The command descriptions have the format s hown below . Alphabetic command name This briefly describes the command functi on. Format This indicates the command format. Environment This defines the environments that ...
-
Canon WUX5000 - page 17
WUX5000 / WUX4000 User Commands - 14 - 6AXADJ 6-axis adjustment ON / OFF Format 6AXADJ=<6-axis adjustment parameter : ID> GET □ 6AXADJ / ? △ 6AXADJ <6-axis adjustmen t parameter:ID> ON This sets the 6-axis adjustment to ON. OFF This sets the 6-axis adjustment to OFF . Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O ...
-
Canon WUX5000 - page 18
WUX5000 / WUX4000 User Commands - 15 - 6AXR-Y 6-axis correction R-Y hu e / saturation settings Format 6AXR=<R hue:Number> ▽ <R saturation:Number> ▽ <R brightness:Number> 6AXG=<G hue:Number> ▽ <G saturation:Number> ▽ <G brightness:Number> 6AXB=<B hue:Number> ▽ <B saturation:Number> ▽ <B ...
-
Canon WUX5000 - page 19
WUX5000 / WUX4000 User Commands - 16 - AMBADJ Ambient light correction adjustment ON / OFF Format AMBADJ=<Ambient light correction adjustment parameter:ID> GET □ AMBADJ / ? △ AMBADJ <Ambient light correction adj ustment parameter:ID> ON This sets the ambient light correction adjustment to ON. OFF This sets the ambient light correcti ...
-
Canon WUX5000 - page 20
WUX5000 / WUX4000 User Commands - 17 - AMBLEVEL Ambient light level settings Format AMBLEVEL=<Ambient light level settings parameter:ID> GET □ AMBLEVEL / ? △ AMBLEVEL <Ambient light level settings parameter:ID> WEAK This sets the ambient light level to WEAK. MIDDLE This s ets the ambient light level to MIDDLE. STRONG This sets the a ...
-
Canon WUX5000 - page 21
WUX5000 / WUX4000 User Commands - 18 - AMBTYPE Ambient light type settings Format AMBTYPE=<Ambient light type settings parameter:ID> GET □ AMBTYPE / ? △ AMBTYPE <Ambient light type settings parameter: ID> TG This sets the ambient light type to T ungsten. FL This sets the ambient light type to Fluorescent. FL_H This sets the ambient ...
-
Canon WUX5000 - page 22
WUX5000 / WUX4000 User Commands - 19 - ASPECT Screen settings Format ASPECT=<Screen setting parameters:ID> GET □ ASPECT / ? △ ASPECT <Screen setting parameters:ID> AUTO Auto 4:3 4:3 16:9 16:9 ZOOM Zoom TRUE Real FULL Full screen Environment Power Input OFF ON PM Parameter D-RGB A-RGB HDMI None X O X AUTO ○ ○ ○ *3 4:3 ○ ○ ? ...
-
Canon WUX5000 - page 23
WUX5000 / WUX4000 User Commands - 20 - Example Setting > ASPECT=16:9 This sets the screen size to 16:9. < i:OK Reference > GET ASPECT or ?ASPECT This retrieves the screen size. < g:ASPECT=TRUE * Commands are indicated by ">", and responses are indicated by "<". ...
-
Canon WUX5000 - page 24
WUX5000 / WUX4000 User Commands - 21 - AUTOPC Auto PC Format AUTOPC △ Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X X O X X X Response "i:OK" is returned if the control was executed properly . For details on other response s, refer to the "Error Lis t". Description (1) This executes Auto PC. (2) This comma ...
-
Canon WUX5000 - page 25
WUX5000 / WUX4000 User Commands - 22 - AUTOSETEXE Auto setup Format AUTOSETEXE □ <Auto set parameter:ID> <Auto set parameter:ID> INPUT Automatic signal sensing execution Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response i:OK” is returned when the automatic processing was completed successfully . For d ...
-
Canon WUX5000 - page 26
WUX5000 / WUX4000 User Commands - 23 - AV O L Audio volume adjustment Format AVOL=<Audio volume level:Number> GET □ AVOL / ? △ AVOL Setting values for <Audio volu me level:Number> are 0 to 20. Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response "i:OK" is returned if the parameter was set properly ...
-
Canon WUX5000 - page 27
WUX5000 / WUX4000 User Commands - 24 - BLANK BLANK function Format BLANK=<BLANK parameter:ID> GET □ BLANK / ? △ BLANK <BLANK parameter:ID> ON BLANK ON OFF BLANK OFF Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response "i:OK" is returned if the parameter was set properly . For ' GET BLANK &apos ...
-
Canon WUX5000 - page 28
WUX5000 / WUX4000 User Commands - 25 - BRI Brightness setting Format BRI=<Brightness setting:Number> GET □ BRI / ? △ BRI Setting values for <Brightness setting: Number> are -20 to 20. Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response "i:OK" is returned if the parameter was set properly . For &ap ...
-
Canon WUX5000 - page 29
WUX5000 / WUX4000 User Commands - 26 - COLOR_TEMP Color temperature setting Format COLOR_TEMP=<Color temperature setting:Number> GET □ COLOR_TEMP / ? △ COLOR_TEMP Setting values for <Color temperat ure setting:Number> are -17 to 21. Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response "i:OK" is ret ...
-
Canon WUX5000 - page 30
WUX5000 / WUX4000 User Commands - 27 - COMVER User command version inquir y Format GET □ COMVER / ? △ COMVER Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None - - Response Returns the user command version as g:COMVER="<User command version:Character string>" For details on other response s, refer to the "Error Li ...
-
Canon WUX5000 - page 31
WUX5000 / WUX4000 User Commands - 28 - CONT Contrast setting Format CONT=<Contrast setting:Number> GET □ CONT / ? △ CONT Setting values for <Contrast setting:Number > are -20 to 20. Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response "i:OK" is returned if the parameter was set properly . For &apos ...
-
Canon WUX5000 - page 32
WUX5000 / WUX4000 User Commands - 29 - DGAMMA Dynamic gamma Format DGAMMA=<Dynamic gamma setting parameter:ID> GET □ DGAMMA / ? △ DGAMMA <Dynamic gamma setting parameter:ID> OFF Off WEAK W eak MIDDLE Middle STRONG Strong Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response "i:OK" is returned if the ...
-
Canon WUX5000 - page 33
WUX5000 / WUX4000 User Commands - 30 - DZOOM_POS DZOOM position setting Format DZOOM_POS=<DZOOM position X:Number>,<DZOOM position Y:Number> GET □ DZOOM_POS / ? △ DZOOM_POS <DZOOM p osition X / Y :Number> is a signe d integer indica ting the central po sition of the en larged inpu t image. Environment Power Input OFF ON PM D-R ...
-
Canon WUX5000 - page 34
WUX5000 / WUX4000 User Commands - 31 - DZOOM_RA T DZOOM ratio setting Format DZOOM_RAT=<DZOOM ratio parameter:ID> GET □ DZOOM_RAT / ? △ DZOOM_RAT <DZOOM ratio parameter:ID> 1 same size (DZOOM disabled) 1.5 1.5x 2 2x 3 3x 4 4x 5 5x 6 6x 8 8x 10 10x 12 12x Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X O O O O X Re ...
-
Canon WUX5000 - page 35
WUX5000 / WUX4000 User Commands - 32 - ERR Error information inquiry Format GET □ ERR / ? △ ERR Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None - - Response Returns the current erro r information as 'g:ERR=<ErrorID:Character string>' For details on other response s, refer to the "Error Lis t". <ErrorID: ...
-
Canon WUX5000 - page 36
WUX5000 / WUX4000 User Commands - 33 - FINE_GAMMA_R Fine gamma (R) adjustment Format FINE_GAMMA_R=<Fine gamma (R) adjustment point 1 adjustment value:Number>, <Fine gamma (R) adjustment point 2 adjustment value:Number>, ・・・ ,<Fine gamma (R) adjustment point n adjustment value:Number> GET □ FINE_GAMMA_R / ? △ FINE_GAMMA_R ...
-
Canon WUX5000 - page 37
WUX5000 / WUX4000 User Commands - 34 - FINE_GAMMA_G Fine gamma (G) adjustment Format FINE_GAMMA_G=<Fine gamma (G) adjustment point 1 adjustment value:Number>, <Fine gamma (G) adjustment point 2 adjustment value:Number>, ・・・ ,<Fine gamma (G) adjustment point n adjustment value:Number> GET □ FINE_GAMMA_G / ? △ FINE_GAMMA_G ...
-
Canon WUX5000 - page 38
WUX5000 / WUX4000 User Commands - 35 - FINE_GAMMA_B Fine gamma (B) adjustment Format FINE_GAMMA_B=<Fine gamma (B) adjustment point 1 adjustment value:Number>, <Fine gamma (B) adjustment point 2 adjustment value:Number>, ・・・ ,<Fine gamma (B) adjustment point n adjustment value:Number> GET □ FINE_GAMMA_B / ? △ FINE_GAMMA_B ...
-
Canon WUX5000 - page 39
WUX5000 / WUX4000 User Commands - 36 - FREEZE Freeze status Format FREEZE=<FREEZE parameter:ID> GET □ FREEZE / ? △ FREEZE <FREEZE parameter:ID> ON Image now frozen OFF Image now not frozen Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X O O O O X Response "i:OK" is returned if the parameter was set prope ...
-
Canon WUX5000 - page 40
WUX5000 / WUX4000 User Commands - 37 - GAMMA Gamma adjustment Format GAMMA=<Gamma adjustment:Number> GET □ GAMMA / ? △ GAMMA Setting values for <Gamma adjustment: Number > are -10 to 10. Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response "i:OK" is returned if the parameter was set properly . For ...
-
Canon WUX5000 - page 41
WUX5000 / WUX4000 User Commands - 38 - HDMI_IN HDMI input setting Format HDMI_IN=<HDMI input setting parameter:ID> GET □ HDMI_IN / ? △ HDMI_IN <HDMI input setting parameter:ID> AUTO Select this when connectin g to an A V equipment. Image processing and menu displays are adjusted r espective to the connected video equipment. PC Selec ...
-
Canon WUX5000 - page 42
WUX5000 / WUX4000 User Commands - 39 - HDMI_OVSCAN HDMI overscan setting Format HDMI_OVSCAN=<HDMI overscan setting parameter:ID> GET □ HDMI_OVSCAN / ? △ HDMI_OVSCAN <HDMI overscan setting parameter:ID> OFF T urns overscan to OFF ON T urns overscan to ON Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - - - O O Res ...
-
Canon WUX5000 - page 43
WUX5000 / WUX4000 User Commands - 40 - HUE Hue setting Format HUE=<Hue setting value:Number> GET □ HUE / ? △ HUE Setting values for <Hue setting value:Number> are -20 to 20. Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response "i:OK" is returned if the parameter was set properly . For ' GET HU ...
-
Canon WUX5000 - page 44
WUX5000 / WUX4000 User Commands - 41 - IMAGE Image mode setting Format IMAGE=<Image mode setting parameter:ID> GET □ IMAGE / ? △ IMAGE <Image mode setting parameter:ID> ST ANDARD Standard PRESENT A TI ON Presentation VIVID_PHOTO V ivid photo PHOTO_SRGB Photo / sRGB DCM_SIM DICOM Sim* DYNAMIC Dynamic VIDEO V ideo CINEMA Cinema USER_1 ...
-
Canon WUX5000 - page 45
WUX5000 / WUX4000 User Commands - 42 - Setting Commands related to the settings 6-axis adjustment 6AXADJ 6-axis color correction 6AXR ∼ Y (5) The current image quality can be acquired using the applicable GET c ommand. (" GET IMAGE ") Example Setting > IMAGE=PRESENTATION This sets the image mode to "Presentation". < i:OK ...
-
Canon WUX5000 - page 46
WUX5000 / WUX4000 User Commands - 43 - IMAGEFLIP Flip display Format IMAGEFLIP=<Image flip setting parameters:ID> GET □ IMAGEFLIP / ? △ IMAGEFLIP <Image flip setting parameters:ID> NONE None CEILING Ceiling REAR Rear projection REAR_CEILING Rear proj ection with ceiling Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X ...
-
Canon WUX5000 - page 47
WUX5000 / WUX4000 User Commands - 44 - INPUT Input selection Format INPUT=<Input selection parameters:ID> GET □ INPUT / ? △ INPUT <Input selection parameters:ID> D-RGB Digital PC A-RGB Analog PC COMP Component HDMI HDMI Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response "i:OK" is returned if the ...
-
Canon WUX5000 - page 48
WUX5000 / WUX4000 User Commands - 45 - LAMP Lamp output setting Format LAMP=<Lamp output setting parameters:ID> GET □ LAMP / ? △ LAMP <Lamp output setting parameters:ID> NORMAL Normal SILENT Silent cooling Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response "i:OK" is returned if the parameter was ...
-
Canon WUX5000 - page 49
WUX5000 / WUX4000 User Commands - 46 - LAMPCOUNTER Lamp ON time inquiry Format GET □ LAMPCOUNTER / ? △ LAMPCOUNTER Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None - - Response Returns current lamp on time as ' g:LAMPCOUNTER="<Lamp ON time:Character string>" ' For details on other response s, refer to the & ...
-
Canon WUX5000 - page 50
WUX5000 / WUX4000 User Commands - 47 - MAIN Front panel operation emulation Format MAIN □ <Main unit panel emulation button parameters:ID> <Main unit panel emulation button para meters:ID> POWER POWER button POWER_OFF POWER bu tton pressed twice MENU MENU LENS LENS INPUT INPUT UP UP UP+REP Hold down the UP button *-REP Release the but ...
-
Canon WUX5000 - page 51
WUX5000 / WUX4000 User Commands - 48 - MEMCADJ Memory color adjustment Format MEMCADJ=<Memory color adjustment parameter:ID> GET □ MEMCADJ / ? △ MEMCADJ <Memory color adjustment parameter:ID> OFF No adjustment MEM_L Memory color adjustment - light MEM_M Memory color adjustment - medium MEM_H Memory color adjustment - heavy Environme ...
-
Canon WUX5000 - page 52
WUX5000 / WUX4000 User Commands - 49 - MODE Control mode switch Format REMOTE LOCAL GET □ MODE / ? △ MODE Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None - - Response "i:OK" is always returned with the cont rol mode switch setting. For ' GET MODE ' or ' ?MODE ', current co ntrol mode is returned as &ap ...
-
Canon WUX5000 - page 53
WUX5000 / WUX4000 User Commands - 50 - MUTE Mute control Format MUTE=<Mute control parameter: ID> GET □ MUTE / ? △ MUTE <Mute control para meter: ID> ON This prohibits the audio / beep sound. OFF This permits the audio / beep sound. Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response "i:OK" is ret ...
-
Canon WUX5000 - page 54
WUX5000 / WUX4000 User Commands - 51 - NR Noise reduction Format NR=<Noise reduction setting parameter:ID> GET □ NR / ? △ NR <Noise reduction setting pa rameter:ID> OFF Off WEAK W eak MIDDLE Middle STRONG Strong Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X X X O O O Response "i:OK" is returned if nois ...
-
Canon WUX5000 - page 55
WUX5000 / WUX4000 User Commands - 52 - POWER This controls the power supply Format POWER □ <Parameter:ID> GET □ POWER / ? △ POWER <Parameter:ID> ON Power ON OFF Power OFF Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None - - Response "i:OK" is returned if the parameter was set properly . For ' GET POWER & ...
-
Canon WUX5000 - page 56
WUX5000 / WUX4000 User Commands - 53 - PRODCODE Product information inquiry Format GET □ PRODCODE / ? △ PRODCODE Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None - - Response Product name is returned as g:PRODCODE="<Product name:Character string>" For details on other response s, refer to the "Error Lis t". ...
-
Canon WUX5000 - page 57
WUX5000 / WUX4000 User Commands - 54 - RC Remote control operation emu late Format RC □ <Remote control emulation button parameters:ID> <Remote control emulatio n button parameters:ID> POWER POWER button POWER_OFF POWER bu tton pressed twice MENU MENU INPUT INPUT ASPECT ASPECT AUTOPC AUTOPC KEYSTONE KEYSTONE UP UP UP+REP Hold down the ...
-
Canon WUX5000 - page 58
WUX5000 / WUX4000 User Commands - 55 - Response "i:OK" is returned when the button press re quest has been acknowledged successfully . (It does not indicate if the operation for the pressed button was executed properly .) Description (1) This emulates pressing of the remote control buttons for controlling the projector . (2) W ith the emu ...
-
Canon WUX5000 - page 59
WUX5000 / WUX4000 User Commands - 56 - RGBGAIN RGB gain adjustment Format RGBGAIN=<R gain setting:Number> ▽ <G gain setting:Number> ▽ <B gain setting:Number> GET □ RGBGAIN / ? △ RGBGAIN Setting values for <R/G/B gain setting:Number> are -60 to 60. Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - R ...
-
Canon WUX5000 - page 60
WUX5000 / WUX4000 User Commands - 57 - RGBOFFSET RGB offset adjustment Format RGBOFFSET=<R offset setting:Number> ▽ <G offset setting:Number> ▽ <B offset setting:Number> GET □ RGBOFFSET / ? △ RGBOFFSET Setting values for <R/G/B offset setting:Number > are -60 to 60. Environment Power Input OFF ON PM D-RGB A-RGB COMP ...
-
Canon WUX5000 - page 61
WUX5000 / WUX4000 User Commands - 58 - ROMVER ROM version inquiry Format GET □ ROMVER / ? △ ROMVER Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None - - Response ROM version of the firmwa re is returned as g:ROMVER="<ROM version:Character string>" For details on other response s, refer to the "Error Lis t". ...
-
Canon WUX5000 - page 62
WUX5000 / WUX4000 User Commands - 59 - SA T Color saturati on setting Format RGBGAIN=<R gain setting:Number> ▽ <G gain setting:Number> ▽ <B gain setting:Number> GET □ RGBGAIN / ? △ RGBGAIN Setting values for <Color saturation setting value:Number> are -20 to 20. Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI ...
-
Canon WUX5000 - page 63
WUX5000 / WUX4000 User Commands - 60 - SA VEIMGPROF Create, save, delete user memory / Create user memory s tatus Format SAVEIMGPROF=<User memory save to parameter:ID> <User memory save to parameter:ID> USER_1 Save to User 1 USER_2 Save to User 2 USER_3 Save to User 3 USER_4 Save to User 4 USER_5 Save to User 5 DEL_ALL Delete all User m ...
-
Canon WUX5000 - page 64
WUX5000 / WUX4000 User Commands - 61 - SCRNASPECT Screen aspect setting Format SCRNASPECT=<Screen aspect setting parameter:ID> GET □ SCRNASPECT / ? △ SCRNASPECT <Screen aspect setting parameter:ID> 16:10 16:10 16:9 16:9 display 4:3 4:3 display 16:9_DIS 16:9 dig ital image shift 4:3_DIS 4:3 digital image shift Environment Power Input ...
-
Canon WUX5000 - page 65
WUX5000 / WUX4000 User Commands - 62 - SEL Input signal selection Format SEL=<Input signal selection parameter:ID> GET □ SEL / ? △ SEL <Input signal selection parameter:ID> AUTO Auto Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X X X O X X Response "i:OK" is returned if the parameter was set properly . ...
-
Canon WUX5000 - page 66
WUX5000 / WUX4000 User Commands - 63 - SHARP Sharpness setting Format SHARP=<Sharpness setting:Number> GET □ SHARP / ? △ SHARP Setting values for <Shar pness setting:Number> are -10 to 10. Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response "i:OK" is returned if the parameter was set properly . Fo ...
-
Canon WUX5000 - page 67
WUX5000 / WUX4000 User Commands - 64 - SIGNAL_INFO Input signal information inquiry Format GET □ SIGNAL_INFO / ? △ SIGNAL_INFO Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response Current input si gnal information is returned as ' g:SIGNAL_INFO="<Input signal information:Character string>" ' Fo ...
-
Canon WUX5000 - page 68
WUX5000 / WUX4000 User Commands - 65 - SIGNALST A TUS Signal status inquiry Format GET □ SIGNALSTATUS / ? △ SIGNALSTATUS Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None X O X - Response Current image sign al input status is retur ned as 'g:SIGNALSTATUS=<Signal status:ID>' For details on other response s, refer to th ...
-
Canon WUX5000 - page 69
WUX5000 / WUX4000 User Commands - 66 - TEMP T emperature sensor value inquiry Format GET □ TEMP / ? △ TEMP Environment Power Input OFF ON PM D-RGB A-RGB COMP HDMI None - - Response For ' GET TEMP ' or ' ?TEMP ', temperature sensor value is returned as ' TEMP=<Number of sensors>,<Sensor 1 value>,…,<Senso ...
-
Canon WUX5000 - page 70
WUX5000 / WUX4000 User Commands - 67 - 7. Error List Item Code TY PE Error character strings Error Remedy 1 0001 e BAD_SEQUENCE Communication sequence err or Wait until a response is receiv ed before sending the next command. 2 0002 e INVALID_COMMAND Invalid (undefined) command. Send a va lid command. 3 0004 e INVALID_FORMAT Invalid command format. ...
-
Canon WUX5000 - page 71
WUX5000 / WUX4000 User Commands - 68 - Item Code TY PE Error character strings Error Remedy 201F e INVALID_SIGNAL Cannot execute command with current input signal. Change the input signal. 17 0801 e INVALID_VALUE Numerical parameters are invalid or outside the specified range. Set the parameters in the correct range. 18 1002 e NO_LOGO_CAPTURED Cann ...
-
Canon WUX5000 - page 72
WUX5000 / WUX4000 User Commands - 69 - 8. Error Processing YES YES YES YES YES YES YES YES YES YES YES YES YES YES Error judgment START Invalid command format? "INVALID_FORMAT" Command executable while power mode is OFF? Power mode is "OFF"? "NOT_POWER_SUPPLIED" Internal processing in progress? "BUSY" Process ...
-
Canon WUX5000 - page 73
WUX5000 / WUX4000 User Commands - 70 - YES YES YES YES NO YES YES Incorrect input source? "INVALID_SOURCE (**)" Limitations in input source? Requires input signal? No input signal? "NO_SIGNAL" Numerical parameter outside the specified range? "INVALID_VALUE" User command is executable FINISHED Invalid input signal? &quo ...
-
Canon WUX5000 - page 74
WUX5000 / WUX4000 User Commands - 71 - 9. Other Use the remote control emulation function (RC command) for the following functions. Function PC command parameter Presentation timer P_T IMER ...
Avez-vous une question à propos de Canon WUX5000?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Canon WUX5000, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Canon WUX5000 il est probable qu’il a envie de partager la façon de le résoudre.