-
Sony SPP-S2730 - page 1
3-232-156- 13 (1) ©2001 Sony Corporation Operating Instructions SPP-S2730 Cor dless T elephone US Hearing-Aid Compatible ...
-
Sony SPP-S2730 - page 2
2 US IMPORT ANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or nea ...
-
Sony SPP-S2730 - page 3
3 US INFORMATION FOR FCC REGURATION CLAIM 1. This equipment complies with Part 15 and Part 68 of the FCC rules for the United States. On the bottom of this equipment is a label that contains, among other information, the FCC certification number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided ...
-
Sony SPP-S2730 - page 4
4 US IMPORT ANTES INSTRUCCIONES DE SEGURID AD A fin de reducir el riesgo de incendio, descarga eléctrica y lesiones a las personas cuando usted use su equipo telefónico, siempre debe observar precauciones básicas de seguridad, entre ellas: 1. No use este producto cerca del agua, por ejemplo, cerca de una bañera, lavabo, fregadero de cocina o la ...
-
Sony SPP-S2730 - page 5
5 US INFORMACIÓN PARA LA DEMANDA DE LA REGLAMENTACIÓN DE LA FCC 1. Este equipo cumple con la Parte 15 y la Parte 68 de las reglas de la FCC para EE.UU. En la base de este equipo hay una etiqueta que contiene, entre otra información, el número de certificado de la FCC y el número de equivalencia de timbre de llamada (REN) para este equipo. Cuan ...
-
Sony SPP-S2730 - page 6
6 US Table of contents Getting Started 8 Welcome 9 Read this first 10 Step 1: Checking the package contents 11 Step 2: Setting up the base phone 14 Step 3: Preparing the battery pack 16 Step 4: Choosing the dialing mode 17 Step 5: Entering the area code 21 Step 6: Setting the day and time 23 Setting up the EZ Access function 25 Registering addition ...
-
Sony SPP-S2730 - page 7
7 US Table of contents 57 Transferring a call 57 Transferring from the cordless handset to the base phone 58 Transferring from the base phone to the cordless handset 59 Transferring between the cordless handsets Caller ID Features 60 Understanding the Caller ID service 60 When you receive a call 61 Looking at the Caller ID list 61 Viewing the Calle ...
-
Sony SPP-S2730 - page 8
Getting Started 8 US Getting Started W elcome Thank you for purchasing Sony QuadraStation 2.4! The phone systems can be expanded to a total of four cordless handsets and realizes the Intercom conversation* between a couple of cordless handsets (Walkie-Talkie function). * Also includes a communication between the base phone and the cordless handset. ...
-
Sony SPP-S2730 - page 9
Getting Started 9 US Getting Started Base phone Read this first Before you use your phone, you must first set it up. Here ’ s a quick way to set up your phone: Steps 1 to 6. Step 2 (pages 11 to 13) You need to do two things to set up the base phone, including finding the best location for the base phone. Step 3 (pages 14 to 15) Insert the battery ...
-
Sony SPP-S2730 - page 10
Getting Started 10 US Telephone line cords (2) Cordless handset AC power adaptor for the base phone (AC-T46) Wall bracket/ stand for base phone Base phone Rechargeable battery pack (BP-T38) Step 1 Checking the package contents Make sure you have received the following items in the package. If anything is missing, contact your local Sony dealer. Cha ...
-
Sony SPP-S2730 - page 11
Getting Started 11 US Getting Started Step 2 Away from television sets and other electronic equipment Away from a microwave oven Away from excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock Away from a personal computer Away from another cordless telephone Near a central location and on a level surface Away from he ...
-
Sony SPP-S2730 - page 12
Getting Started 12 US 1 2 1 Connect the handset cord to the HANDSET jack and to the handset. 2 Connect the telephone line cord to the LINE jack and to a telephone outlet. 3 Connect the AC power adaptor to the DC IN 9V jack and to an AC outlet. 4 Raise the antenna. Make sure it points towards the ceiling. Connect the base phone If you want to hang t ...
-
Sony SPP-S2730 - page 13
Getting Started 13 US Getting Started Notes • Use only the supplied AC-T46 AC power adaptor. Do not use any other AC power adaptor. • Connect the AC power adaptor to a continuous power supply. • Place the base phone close to the AC outlet so that you can unplug the AC power adaptor easily. Tip If your telephone outlet is not modular, contact ...
-
Sony SPP-S2730 - page 14
Getting Started 14 US Pr eparing the battery pack Charge the battery pack for more than 12 hours before you start using your cordless handset. 1 Slide open the battery compartment lid of the cordless handset. 2 Connect the battery connector with correct polarity (black wire goes on lower side and red wire goes on upper side). 3 Hook the cords and i ...
-
Sony SPP-S2730 - page 15
Getting Started 15 US Getting Started About the station number When you start charging the battery, “ HANDSET 1 ” appears on the display of the cordless handset. This shows the ID number for each cordless handset and base phone of the system, called “ station number. ” The station number of the base phone is set to 0 and that of the cordles ...
-
Sony SPP-S2730 - page 16
Getting Started 16 US Choosing the dialing mode For the telephone to work properly, select an appropriate dialing mode (tone or pulse). You can select the dialing mode on both the base phone and cordless handset. The dialing mode that has been last set either with the base phone or cordless handset is selected. When you set the dialing mode with th ...
-
Sony SPP-S2730 - page 17
Getting Started 17 US Getting Started Entering the area code When you use this phone for the first time, or move to an area that has a different area code, you must enter the area code. Otherwise, you cannot use some functions of this phone and the Caller ID functions. This is also necessary because the phone must be able to select an area code to ...
-
Sony SPP-S2730 - page 18
Getting Started 18 US 4 Enter the three digits of your home area code using the dialing keys. 5 Press (PGM) . You hear a long confirmation beep. Notes • If the home area code is already entered, it appears on the display in step 2. To enter a different home area code, see “ To change the home area code ” below. • Do not allow more than 60 s ...
-
Sony SPP-S2730 - page 19
Getting Started 19 US Getting Started To enter the local area code (For 10 digits phone numbers users) If a call matches one of the local area codes you entered, the phone number will be registered with 10 digits in the Caller ID list (area code + number). If a call does not match one of the local area codes you entered, the phone number will be re ...
-
Sony SPP-S2730 - page 20
Getting Started 20 US To change the local area code 1 Perform steps 1 to 3 on page 19. The current local area code appears on the display. 2 Press (ERASE) to erase the current local area code. 3 Enter a new local area code using the dialing keys. 4 Press (PGM) . You hear a long confirmation beep. To erase the local area code You can erase the local ...
-
Sony SPP-S2730 - page 21
Getting Started 21 US Getting Started Setting the day and time You can set the day and time only with the cordless handset. Make sure the base phone* is not in use before you start the setting. * If the system includes additional cordless handsets, it is necessary to stop using them before you start the setting as well. 1 Press (PGM) . 2 Turn Jog D ...
-
Sony SPP-S2730 - page 22
Getting Started 22 US 5 Press Jog Dial. 6 Set the minute (00 to 59) by turning Jog Dial. 7 Press Jog Dial. 8 Select “ AM ” or “ PM ” by turning Jog Dial, and then press Jog Dial. You hear a long confirmation beep. Then the phone starts counting time. Notes • Do not allow more than 60 seconds to elapse during the operation procedure. •? ...
-
Sony SPP-S2730 - page 23
Getting Started 23 US Getting Started continued The EZ Access function enables you to access to any set of numbers up to 32 digits long by simple one-touch. Use for calling cards plus PIN, voice mail, long distance provider, or any other set of frequently used number. After setting up the access number, you only need to press (EZ ACCESS) for dialin ...
-
Sony SPP-S2730 - page 24
Getting Started 24 US To use the EZ Access – for making calls, see page 33, 35. – for redialing, see page 37. – for making calls from the Phone Directory, see page 47. – for making calls from Caller ID list, see page 64. To change the access number 1 Perform steps 1 and 2 on page 23. The current access number appears on the display. 2 Press ...
-
Sony SPP-S2730 - page 25
Getting Started 25 US Getting Started The phone system includes a cordless handset. You can expand the system including a total of four cordless handsets. Be sure to register the ID number of the additional cordless handset called “ station number ” to the base phone before using the additional cordless handset. The station number of the base p ...
-
Sony SPP-S2730 - page 26
Getting Started 26 US 3 Enter the 8 digits system ID by pressing the dialing keys. The system ID is shown on a sticker affixed to the bottom of the base phone. 4 Press (PGM) . You hear a long confirmation beep and the assigned station number is displayed. Notes • Do not allow more than 60 seconds to elapse during the operation procedure. • Once ...
-
Sony SPP-S2730 - page 27
Getting Started 27 US Getting Started Changing the language of the display (GO BACK) NO SI RING OFF MASSAGE OLD NEW You can choose English or Spanish as the display language by following the procedure below. You can select the display language both the base phone and the cordless handset, further more, you can select the display language on each un ...
-
Sony SPP-S2730 - page 28
Getting Started 28 US Identifying the parts Refer to the pages indicated in parentheses for details. Base phone 1 Display window (p. 35, 60) 2 VOICE MAIL lamp (p. 70) Flashes when you have messages. 3 NEW CALL lamp (p. 61) Flashes when there is a “ NEW ” data in the Caller ID list. 4 Handset (p. 12, 35, 41) 5 Speaker 6 TONE button (p. 33) Allow ...
-
Sony SPP-S2730 - page 29
Getting Started 29 US Getting Started continued qj INTERCOM button (p. 55) Lets you talk between the base phone and cordless handset. qk HOLD button (p. 36) Puts a call on hold. ql SPEAKERPHONE button (p. 35) Lets you make or receive a call. w; MIC (microphone) ws wd wa wf wg wa Antenna (p. 12, 71) ws Hook for AC power adaptor cord (p. 12, 71) wd D ...
-
Sony SPP-S2730 - page 30
Getting Started 30 US Identifying the parts (continued) 1 Antenna 2 Speaker 3 Display window (p. 32, 60) 4 TALK button (p. 32) Lets you make or receive a call. 5 HOLD button (p. 33) Puts a call on hold. 6 Battery compartment (p. 14) 7 CALL WAITING/FLASH button (p. 33, 68) Switches to a second call if you have “ call waiting ” service, or lets y ...
-
Sony SPP-S2730 - page 31
Getting Started 31 US Getting Started qg qh qj ql qk w; wa qf qf TONE button (p. 33) Allows you to switch temporarily to tone dialing. qg RINGER qh I (HEADSET) jack (p. 33, 39, 72) qj VOL (volume) switch (p. 33) Adjust the cordless handset volume. qk # button (p. 66) Used to change the number of digits of the phone number in the Caller ID list. ql ...
-
Sony SPP-S2730 - page 32
Basics 32 US 1 Pick up the cordless handset from the charger. 2 Press (TALK) and wait until “TALK” appears on the display and the display also shows the talk time in hours, minutes and seconds. The dialing keys light up. You then hear a dial tone. “HANDSET 1 IN USE” appears on the display of the base phone when the cordless handset with the ...
-
Sony SPP-S2730 - page 33
Basics 33 US Basics Making calls when the headset is connected When a headset (optional) is connected to the I (HEADSET) jack on the cordless handset, you can talk through the headset. Making calls using the EZ Access function To set up the access number, see “Setting up the EZ Access function” on page 23. 1 Pick up the cordless handset from th ...
-
Sony SPP-S2730 - page 34
Basics 34 US Making calls (continued) Notes • When making a call on the cordless handset, “ ” appears on the display indicating the receiver sensitivity with the base phone. Three bars indicate a good reception, no bar indicates a bad reception. When calling from an area with poor reception, you may experience interference or the call may be ...
-
Sony SPP-S2730 - page 35
Basics 35 US Basics Making calls with the base phone 1 Pick up the handset or press (SPEAKERPHONE) on the base phone. “TALK” or “SPEAKERPHONE” appears on the display and the display also shows the talk time in hours, minutes and seconds. 2 Dial the phone number. 3 When you’re done talking, replace the handset in the cradle or press (SPEAK ...
-
Sony SPP-S2730 - page 36
Basics 36 US Making calls (continued) Notes • While talking with an outside caller via the cordless handset, the display on the base phone shows “HANDSET 1 IN USE” when the cordless handset with the station number “1” is in use, and you cannot make a call with the base phone. • When the talk time exceeds 9:59:59, the display counts from ...
-
Sony SPP-S2730 - page 37
Basics 37 US Basics Redialing Both the base phone and the cordless handset can each individually store five dialed phone numbers. 1 Press (REDIAL/PAUSE) . 2 Display the name or phone number you want to call by turning Jog Dial. 3 Press Jog Dial. 4 Turn Jog Dial to choose “DIAL”, and then press Jog Dial. The phone number will be redialed. Notes ...
-
Sony SPP-S2730 - page 38
Basics 38 US Making calls (continued) To erase the dialed phone number one by one 1 Display the name or phone number you want to erase by doing steps 1 to 3 on page 37. 2 Turn Jog Dial to choose “ERASE REDIAL”, and then press Jog Dial. 3 Turn Jog Dial to choose “YES”, and then press Jog Dial. You hear a long confirmation beep, and the numbe ...
-
Sony SPP-S2730 - page 39
Basics 39 US Basics 1 When you hear the phone ring: • Press (TALK) . or • Pick up the cordless handset from the charger when the cordless handset is placed on the charger. (When Quick talk is set to “ON”; see page 40) “TALK” appears on the display and the display also shows the talk time in hours, minutes and seconds. “HANDSET 1 IN US ...
-
Sony SPP-S2730 - page 40
Basics 40 US To Adjust the cordless handset volume Put a call on hold Switch to another call (“call waiting” service*) Receive a call by only picking up the cordless handset from the charger, without pressing (TALK) (Quick talk) Adjust the ringer volume of the cordless handset * You need to subscribe to this service from your telephone company. ...
-
Sony SPP-S2730 - page 41
Basics 41 US Basics Receiving calls with the base phone 1 When you hear the phone ring, pick up the handset or press (SPEAKERPHONE) on the base phone. “TALK” or “SPEAKERPHONE” appears on the display and the display also shows the talk time in hours, minutes and seconds. 2 When you’re done talking, replace the handset in the cradle or pres ...
-
Sony SPP-S2730 - page 42
Basics 42 US Receiving calls (continued) Note Even when you set the ringer volume on the base phone to off, the cordless handset will ring when the ringer volume on the cordless handset is set to high or low. Tips • To inform you of an incoming call, the display shows “ ** RINGING ** ” even when you set the ringer volume on the base phone to ...
-
Sony SPP-S2730 - page 43
43 US Telephone Features Telephone Features You can dial a number by scrolling through the Phone Directory. Both the base phone and the cordless handset can each store up to 50 separate numbers. Storing phone numbers and names Example : to store “SONY” “123- 4567”. 1 Press (PGM) . (Press (PROGRAM) on the base phone.) If “PHONE DIRECTORY? ...
-
Sony SPP-S2730 - page 44
44 US Telephone Features Each press of Jog Dial after choosing “ M ” or “ m ” switches the characters from upper case letters t lower case letters t numbers and symbols. Enter successive characters in the same way. To enter a “space”, turn Jog Dial to choose “ ” (space), and then press Jog Dial. 4 Press (PGM) (or (PROGRAM) ). “ENT ...
-
Sony SPP-S2730 - page 45
45 US Telephone Features Telephone Features Notes • If you try to save a 51st phone number, you will hear five short error beeps and “THE MEMORY IS FULL” will be displayed. You cannot store the phone number. To store another phone number, erase one of the stored phone numbers (see page 49). • Names cannot be entered using the dialing keys. ...
-
Sony SPP-S2730 - page 46
46 US Telephone Features Phone Directory (continued) Making calls from the Phone Directory 1 Press Jog Dial. “PHONE DIRECTORY” appears on the display. 2 Turn Jog Dial to select an alphabet group ([ABC], [DEF]...) which includes the initial character of the name you want to search for, and then press Jog Dial. If a numbers or a symbol is the ini ...
-
Sony SPP-S2730 - page 47
47 US Telephone Features Telephone Features continued 5 Turn Jog Dial to choose “DIAL”, and then press Jog Dial. The phone number will be dialed. Tips • When you select “(GO BACK)”, you can return to the previous set display by pressing Jog Dial. • If there is no data recorded in the selected alphabet group in step 2, the data memory of ...
-
Sony SPP-S2730 - page 48
48 US Telephone Features Phone Directory (continued) Changing a stored name and/or phone number 1 Display the name you want to change by doing steps 1 to 3 on page 46. 2 Press Jog Dial. 3 Turn Jog Dial to choose “EDIT”, and then press Jog Dial. The cursor “_” is at the right of the name. 4 Turn Jog Dial to choose “ P ”, then press Jog D ...
-
Sony SPP-S2730 - page 49
49 US Telephone Features Telephone Features continued Erasing a memory location To erase the phone number one by one 1 Display the name you want to erase by doing steps 1 to 3 on page 46. 2 Press Jog Dial. 3 Turn Jog Dial to choose “ERASE DIRECTORY”, and then press Jog Dial. 4 Turn Jog Dial to choose “YES”, and then press Jog Dial. You hear ...
-
Sony SPP-S2730 - page 50
50 US Telephone Features Phone Directory (continued) Transferring the Phone Directory memory The Phone Directory memory can be transferred one by one or all at once (with a maximum of 50 numbers) from a cordless handset to the base phone or to an additional cordless handset, or from a base phone to one of the cordless handsets. Make sure the base p ...
-
Sony SPP-S2730 - page 51
51 US Telephone Features Telephone Features To transfer all phone numbers from the Phone Directory The Phone Directory receiving the transfer will be totally overwritten. 1 Press (PGM) . (Press (PROGRAM) on the base phone.) 2 Turn Jog Dial to choose “MEMORY MANAGE”, and then press Jog Dial. 3 Press Jog Dial. 4 When the system has one cordless h ...
-
Sony SPP-S2730 - page 52
52 US Telephone Features Switching the phones during a call You can easily switch between the cordless handset and the base phone, or between the cordless handsets without disconnecting the call. Switching from the base phone to the cordless handset 1 Press (HOLD) on the base phone. The call is on hold and “HOLD” appears on the display. 2 Pick ...
-
Sony SPP-S2730 - page 53
53 US Telephone Features Telephone Features Switching from the cordless handset to another cordless handset (When the system has an additional cordless handset) 1 Press (HOLD) on the cordless handset. The call is on hold and “HOLD” appears on the display. 2 Pick up another cordless handset from the charger (When Quick talk is set to “ON”; s ...
-
Sony SPP-S2730 - page 54
54 US Intercom Operation Intercom Operation T alking between the phones – Intercom You can make an intercom call between the cordless handset and base phone, or between the cordless handsets. You can start the intercom from any phone. Talking from the cordless handset to the base phone Example : Making intercom call from the cordless handset whos ...
-
Sony SPP-S2730 - page 55
55 US Intercom Operation Intercom Operation continued Talking from the base phone to the cordless handset Example : Making intercom call from the base phone to the cordless handset whose station number is 1. 1 Press (INTERCOM) . 2 When the system has one cordless handset Skip this step. When the system has an additional cordless handset Turn Jog Di ...
-
Sony SPP-S2730 - page 56
56 US Intercom Operation Talking between the phones – Intercom (continued) Talking between the cordless handsets – Walkie-Talkie function (When the system has an additional cordless handset) You can make an intercom conversation between a couple of cordless handsets (Walkie-Talkie function) of the same phone system far from the base phone (e.g. ...
-
Sony SPP-S2730 - page 57
57 US Intercom Operation Intercom Operation continued T ransferring a call You can transfer a call between the cordless handset and base phone, or between the cordless handsets without disconnecting the call. Transferring from the cordless handset to the base phone Example : Transferring a call from the cordless handset whose station number is 1 to ...
-
Sony SPP-S2730 - page 58
58 US Intercom Operation Transferring a call (continued) Transferring from the base phone to the cordless handset Example : Transferring a call from the base phone to the cordless handset whose station number is 1. 1 Press (INTERCOM) . The call is put on hold. 2 When the system has one cordless handset Skip this step. When the system has an additio ...
-
Sony SPP-S2730 - page 59
59 US Intercom Operation Intercom Operation Transferring between the cordless handsets (When the system has an additional cordless handset) Example : Transferring a call from station number 1 to station number 2. 1 Press (INTERCOM) . The call is put on hold. 2 Turn Jog Dial to choose “TO HANDSET 2”, and then press Jog Dial. Both cordless handse ...
-
Sony SPP-S2730 - page 60
60 US Caller ID Features Caller ID Features Understanding the Caller ID service Caller ID allows the caller’s phone number to be shown on the display before you answer the call. In order to use this feature, you must first subscribe to Caller ID service. The name of this service may vary depending on your telephone company. To use this feature, b ...
-
Sony SPP-S2730 - page 61
Caller ID Features Caller ID Features 61 US Looking at the Caller ID list The phone stores the data of the last 70 calls received including “UNKNOWN NUMBER/NAME/CALLER” and “BLOCKED NUMBER/NAME/CALL” calls. It keeps track of all calls received; even if they were not answered. Viewing the Caller ID list You can look through the Caller ID lis ...
-
Sony SPP-S2730 - page 62
62 US Caller ID Features Looking at the Caller ID list (continued) Erasing data from the Caller ID list Old data will be erased automatically when a 71st call comes in, but you can also manually erase unnecessary data one by one or erase the entire list. To erase the phone number one by one 1 Display the phone number you want to erase from the Call ...
-
Sony SPP-S2730 - page 63
Caller ID Features Caller ID Features 63 US To erase the entire list at once Entire Caller ID list deletion can only be made on the cordless handset. Note that Caller ID data in the list that has not been viewed will also be erased. 1 Press (PGM) . 2 Turn Jog Dial to choose “MEMORY MANAGE”, and then press Jog Dial. 3 Turn Jog Dial to choose “ ...
-
Sony SPP-S2730 - page 64
64 US Caller ID Features Using the Caller ID list By using the Caller ID list, you can call back a phone number from the Caller ID list easily or store numbers from the Caller ID list into the Phone Directory. Calling back a number from the Caller ID list 1 Display the phone number you want to call from the Caller ID list (see page 61). 2 Press Jog ...
-
Sony SPP-S2730 - page 65
Caller ID Features Caller ID Features 65 US Storing a number of the Caller ID list into the Phone Directory 1 Display the name and phone number you want to store from the Caller ID list (see page 61). 2 Confirm the number and press Jog Dial. 3 Turn Jog Dial to choose “PROGRAM”, and then press Jog Dial. The cursor “_” is at the right of the ...
-
Sony SPP-S2730 - page 66
66 US Caller ID Features Using the Caller ID list (continued) Notes • If the area code is not entered, “ENTER AREA CODE” will appear on the display, and you will not be able to store into the Phone Directory. Enter the area code (see page 17). • Do not allow more than 60 seconds to elapse during the operation procedure. • If the number di ...
-
Sony SPP-S2730 - page 67
Caller ID Features Caller ID Features 67 US 2 Continue the operation to call or store the phone number with the correct number of digits (pages 64 and 65). Notes • You need to adjust the number of digits each time you call back from the Caller ID list as the changes to the Caller ID data is not stored in memory. • You may not be able to change ...
-
Sony SPP-S2730 - page 68
68 US Caller ID Features Using “Caller ID with call waiting” service This telephone is compatible with the “Caller ID with call waiting” service. Make sure that your telephone company offers this service. Like the basic Caller ID service, you need to subscribe to “Caller ID with call waiting” in order to use this service. Even though yo ...
-
Sony SPP-S2730 - page 69
Caller ID Features Caller ID Features 69 US Using voice mail service If you subscribe to your telephone company’s message service which includes this feature, the display will show that you have messages waiting to be retrieved. If you have messages “MESSAGES WAITING” appears on the display on the cordless handset, and the VOICE MAIL lamp on ...
-
Sony SPP-S2730 - page 70
70 US Caller ID Features If you move or change your telephone company Message waiting signals are sent in one of two ways: FSK signaling or “stutter” signaling (Your telephone company can provide you with more information about your service). The first time this phone receives a voice mail message, it will set itself to the FSK service and will ...
-
Sony SPP-S2730 - page 71
Additional Information 71 US Additional Information Mounting the base phone on a wall 1 Reverse the hang-up tab. 2 Plug the telephone line cord to the LINE jack and the AC power adaptor to the DC IN 9V jack, and hook the cords. Use the shorter cord for mounting. 3 Attach the wall bracket to the center of the base phone. Align the f marks of the wal ...
-
Sony SPP-S2730 - page 72
Additional Information 72 US Carrying the cor dless handset by the belt clip You can hang the cordless handset on the belt using the belt clip. Open the belt clip of the cordless handset by pressing the top of it, and then attach the cordless handset to the belt. Using the headset You can talk on the cordless handset without using your hands by con ...
-
Sony SPP-S2730 - page 73
Additional Information 73 US Additional Information Notes on power sour ces On battery pack • Store the battery pack at a temperature between 41°F (5°C) and 95°F (35°C) for best performance. • If you do not use the cordless handset for a long period of time, remove the battery pack after charging for more than 12 hours. On power failure Dur ...
-
Sony SPP-S2730 - page 74
Additional Information 74 US Maintenance • Clean the cabinets with a soft cloth slightly moistened with water or a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine as they may damage the finish of the cabinet. • If the charge terminals of the charger and cordless handset are soi ...
-
Sony SPP-S2730 - page 75
Additional Information 75 US Additional Information Symptom The base phone does not operate properly. You hear five short error beeps when you press (TALK) . You hear no dial tone. The phone does not connect at all, even though the number you dial is correct. The phone does not redial correctly. You cannot hear anything from the speakerphone. Even ...
-
Sony SPP-S2730 - page 76
Additional Information 76 US Troubleshooting (continued) Symptom You hear interference during conversation. You hear a beep every second during a conversation and “ ” appears on the display. You hear a beep twice per second and “BATTERY LOW” appears on the display. The cordless handset does not ring when you use the intercom from the base p ...
-
Sony SPP-S2730 - page 77
Additional Information 77 US Additional Information Symptom The caller’s name and/or phone number does not appear on the display. The caller’s name and/or phone number does not appear on the display during call waiting. You cannot dial the number from the Caller ID list. The memory match function does not work. You cannot use voice mail service ...
-
Sony SPP-S2730 - page 78
Additional Information 78 US Symptom The CHARGE lamp on the charger does not light up when you place the cordless handset to charge. The battery duration is short. Note Should any problems persist, press RESET on the bottom of the base phone with the tip of a toothpick or some other sharp instrument. This has no effect on the memory in the base pho ...
-
Sony SPP-S2730 - page 79
79 US Additional Information Additional Information General Spread method Direct-Sequence Spread-Spectrum Access method FDMA-TDD Frequency band 2.4075 - 2.4720 GHz Operating channel 40 channels Dial signal Tone, 10 PPS (pulse) selectable Supplied accessories See page 10. Cordless handset Power source Rechargeable battery pack BP-T38 Battery life St ...
-
Sony SPP-S2730 - page 80
Additional Information 80 US Index A Adjusting volume cordless handset volume 33, 40 handset volume 36, 41 ringer volume 40, 41 speakerphone volume 36, 41 Area code 17 B Battery pack charging 14 duration 15 BLOCKED NUMBER/ NAME/CALL 60 C Call waiting service 33, 40 Caller ID 60 Caller ID list 61 calling back 64 memory match function 60 storing in P ...
-
Sony SPP-S2730 - page 81
81 US Additional Information Additional Information T Talking between the phones 54 Tone dialing dialing mode 16 switching to 33 Transferring a call 57 Troubleshooting 75 U UNKNOWN NUMBER/ NAME/CALLER 60 V VOICE MAIL 69 Volume cordless handset 33, 40 handset 36, 41 ringer 40, 41 speakerphone 36, 41 W, X, Y, Z Walkie-Talkie function 56 ...
-
Sony SPP-S2730 - page 82
...
-
Sony SPP-S2730 - page 83
...
-
Sony SPP-S2730 - page 84
For the customers in the USA Be sure to save the receipt and attach it to your WARRANTY card when having your equipment repaired at an authorized Sony service center. Sony Corporation Printed in Taiwan, R.O.C. For online product registration, please contact www.sony.com/productregistration ...
Avez-vous une question à propos de Sony SPP-S2730?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Sony SPP-S2730, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Sony SPP-S2730 il est probable qu’il a envie de partager la façon de le résoudre.