Manuel d’utilisation A.O. Smith ST 1500

12 pages 0.94 mb
Télécharger

Aller à la page of 12

Summary
  • A.O. Smith ST 1500 - page 1

    INSTALLATION INSTRUCTIONS AND USERS MANUAL HOT WATER STORAGE TANKS MODEL: ST 1500-3000 FOREWORD Before attempting to install th is water heater please read the insta llation instructions. An authorized installer must install the heat er an d commission it according to the local valid requirements. A.O. SMITH CANNOT ACCEPT ANY RESPONSIBILITY FOR GUA ...

  • A.O. Smith ST 1500 - page 2

    CONTENTS 1. GENERAL 1.1 Description of the heater 3 1.2 Controls 3 1.3 Dimensions 3 1.4 Technical data 5 2. FOR THE INSTALLER 2.1 Installation 5 2.2 Water connections 6 2.3 Commissioning 7 2.3.1 Filling the heater 7 2.3.2 Heater start-up 7 2.4 Shutting down 7 2.5 Maintenance 7 2.5.1 Anode 7 2.5.2 Descaling 7 2.6 Spare parts 8 3. FOR THE END - USER ...

  • A.O. Smith ST 1500 - page 3

    1. GENERAL 1.1 Description of the heater Construction of the heater is in accordance wi th the European standard f or water heaters or sanitary use. The heaters are suitable for use with a working pressure of up to 7 bar. The cylindrical tank is made from sheet steel . For protection agains t corrosion, the inside of the tank is glass-lined. The ta ...

  • A.O. Smith ST 1500 - page 4

    1.4 Technical specifications ST 1500/2000 ST 2500/3000 1 Storage capacity ltr 1500/2000 2500/3000 2 Tank heat loss kWh/24h 8.5 10.1 3 Maximum working pressure bar 7 7 4 Test pressure tank bar 12 12 5 Maximum allowed tank temperature °C 95 95 6 Weight empty kg 374/506 637/739 2. FOR THE INSTALLER 2.1 Installation A qualified, competent installer mu ...

  • A.O. Smith ST 1500 - page 5

    Back-up element 6 1 = drain (on small tanks only) 2 = valve 3 = check valve 4 = pressure relive valve 5 = circulation pump sanitary water 6 = temperature sensor for boiler three way valve A = circulation line B = wa rm wat er C = cold water E = boiler water hot F = boiler water return Optional backup elements are available for field installation up ...

  • A.O. Smith ST 1500 - page 6

    2.3 Commissioning 2.3.1 Filling the tank 1. Check if any installed drain valve is closed. 2. Open the cold-water supply valve to the heater 3. Open all hot-water outlets in order to bleed all air from the system . The heater is filled when cold water runs out of all outlets. 4. Close all hot water taps 2.3.2 Start up Check if the heater is filled w ...

  • A.O. Smith ST 1500 - page 7

    2.5.2 Descaling Calcium precipitation depends on the water properties and the hot water demand. In addition, calcium precipitation in the tanks in creases at high water tem peratures. A clean out opening is located at the front for inspecting and des caling the tank. The clean out opening can be reached via the cover plate on the outer jacket of th ...

  • A.O. Smith ST 1500 - page 8

    4. WARRANTY 4.1 Warranty in general If within one year of the origin al installa tion date of the tank s upplied by A.O. Sm ith any part or component other than the tank sh all prove upon examination by A.O. Smith, and in the exclusive opinion of the latter, to be defective in material and/or workmanship, A.O. Smith will exchange or rep air such pa ...

  • A.O. Smith ST 1500 - page 9

    4.4 Exclusions The warranty ensuing from sections 4.1 and 4.2 will be null and void: a. If the tank has been damaged by external causes. b. In case of misuse, neglect (including fros t damage), incorrect or improper use of the tank, or if attempts have been made to repair leaks; c. In the case of ingress of contamin ants or other particles into the ...

  • A.O. Smith ST 1500 - page 10

    ST 1500-3000 series Kit installation instructions 1 – Contents of flange kit Bag A Flange plate Designation Quantity Bolts 6 Gasket 1 Flange plate 1 Bag D 1 Bag D Flange collar and cover fixation screws and bracket s Designation Quantite Brackets 3 Parker screws 5 Flange collar and cover Installation manuals 10 ...

  • A.O. Smith ST 1500 - page 11

    2 – Mounting instructions for flange cov ers, anodes, T&P and insulation package IMPORTANT: Start with mounting two plug anodes in the lo wer and center anode opening on the side of the tank. In the top anode opening you need to mount the o utlet anode with T-piece for T&P relieve valve (included) and ther mometer (not included). Make sur ...

  • A.O. Smith ST 1500 - page 12

    3 – Mounting instruction for rigid jacket Center each jacket segment on one of the feet .. Nota : top panels, once placed, fixate the jacket. 4 – Mounting of the flexible jacket Install the flexible jacket before mounting the cl ean out colla r and cover. The colla r serves as mould to cut the required opening in the jacket. In case the zipper ...

Fabricant A.O. Smith Catégorie Electric Heater

Les documents que nous recevons du fabricant de l'appareilA.O. Smith ST 1500 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques A.O. Smith
- manuels d’utilisations ST 1500
- fiches produit A.O. Smith
- dépliants
- ou étiquettes-énergie A.O. Smith ST 1500
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation A.O. Smith ST 1500.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation A.O. Smith ST 1500, manuels d’entretien, brefs manuels ou manuels de l’utilisateur A.O. Smith ST 1500. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit A.O. Smith ST 1500.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil A.O. Smith ST 1500, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser A.O. Smith ST 1500 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs A.O. Smith ST 1500.

Le manuel d’utilisation complet A.O. Smith, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel A.O. Smith ST 1500 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières A.O. Smith ST 1500, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lA.O. Smith ST 1500 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil A.O. Smith ST 1500 - qui devraient nous aider dans les premières étapes lors de l'utilisation A.O. Smith ST 1500
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de A.O. Smith ST 1500
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service A.O. Smith ST 1500 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de A.O. Smith ST 1500?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec A.O. Smith ST 1500, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec A.O. Smith ST 1500 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)