Manuel d’utilisation Brother DR-3200

11 pages Non applicable
Télécharger

Aller à la page of 11

Summary
  • Brother DR-3200 - page 1

    BROTHER ® HL-5300 SERIES • TN650 TONER CAR TRIDGE REMANUF ACTURING INSTRUCTIONS BROTHER ® TN650 TONER CAR TRIDGE © 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information. Unaut ...

  • Brother DR-3200 - page 2

    Released in April 2009, the Br other HL -5300 series printer is based on a new 32ppm, true 1200 DPI laser engine. These machines hav e a first page out in less than 8.5 seconds and come standard with 1 6 or 32Mb of memor y , depending on the machine. The HL -5300 series also hav e built-in duplexing. Our HL -53 70 machine came with a TN620 car trid ...

  • Brother DR-3200 - page 3

    BASIC BROTHER PRINT THEOR Y As with previous Br other car tridges, the wast e toner is repelled out of the drum car tridge and picked up b y the dev eloper rolle r in the toner cartridge and brought back into supply chamber . That is why there will alwa ys be a good amount of toner left in the supply chamber when the car tridge is finished. This re ...

  • Brother DR-3200 - page 4

    1. V acuum the ext erior of the car tridge. Remo ve the fill plug from the t oner car tridge. Dump the remaining toner and vacuum/blow out the cartridge. Even though the gears are cov ered on these car tridges, we ha ve f ound it best to k eep one hand ov er the gear side to pr otect them. 2 On the non-gear side of the dev eloper roller , remove th ...

  • Brother DR-3200 - page 5

    5. The reset gear is spring-loaded and must be positioned correctly for the print er to accept a ne w car tridge. Our printer came with a TN620 starter car tridge that had a reset gear installed so all car tridges would be able to be recy cled. 6. Remo ve the black plastic spacer fr om the dev eloper roller shaf t. 7 . Remo ve the E-Ring. BRO THER ...

  • Brother DR-3200 - page 6

    8. Remo ve all the remaining gears. Do not lose the reset gear spring! 9. On the gear side of the dev eloper roller , press in on the locking tab and rotate the de veloper r oller lock up. BRO THER HL-5300 SERIES • TN650 T ONER CARTRIDGE REMANUF ACTURING INSTRUCTIONS © 2010 UniNet Imaging Inc. All trademark names and artwork are property of thei ...

  • Brother DR-3200 - page 7

    1 0. Remo ve the dev eloper roller . Vacuum the doct or blade and foam f eed r oller clean. Until new blades are a vailable, we do not recommend that the doctor blade be remo ved or the dev eloper roller f elt seals disturbed. The doctor blade can be easily cleaned by first blowing off the excess t oner and then wiping down, using a lint-free cloth ...

  • Brother DR-3200 - page 8

    13. Install the non-gear side axle plat e. Make sure the clear plastic plug f or the optical sensor is locked in the pr oper posit ion. Clean the gears making sure that they ha ve no t oner on them. This is a good time to also check the gear shafts to make sure there is enough grease. If the shaf ts appear dr y , or the grease is contaminated with ...

  • Brother DR-3200 - page 9

    15. Depending on the cartridge you hav e, set the reset gears as shown: For the TN620 . For the TN650 . BRO THER HL-5300 SERIES • TN650 T ONER CARTRIDGE REMANUF ACTURING INSTRUCTIONS © 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility ...

  • Brother DR-3200 - page 10

    1 6. Install the gear cov er plate and two scre ws: For the TN620 . For the TN650 . 1 7 . On the non-gear side, install the outer axle plate co ver and screw . 18. Fill the car tridge with black toner f or Bro ther 5300 series. BRO THER HL-5300 SERIES • TN650 T ONER CARTRIDGE REMANUF ACTURING INSTRUCTIONS © 2010 UniNet Imaging Inc. All trademark ...

  • Brother DR-3200 - page 11

    19. R eplace the fill plug. Wipe the car tridge down to remo ve an y remaining toner dust. 20. Install the dev eloper roller co ver . TEST P AGES 1. Press the “GO” Button 1x with the fr ont cov er closed and the "READ Y" light on. 2. A test sam ple page will print 3. Press the “GO” Button 2x with the fr ont cov er closed and the & ...

Fabricant Brother Catégorie Printer drum

Les documents que nous recevons du fabricant de l'appareilBrother DR-3200 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Brother
- manuels d’utilisations DR-3200
- fiches produit Brother
- dépliants
- ou étiquettes-énergie Brother DR-3200
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Brother DR-3200.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Brother DR-3200, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Brother DR-3200. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Brother DR-3200.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Brother DR-3200, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Brother DR-3200 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Brother DR-3200.

Le manuel d’utilisation complet Brother, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Brother DR-3200 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Brother DR-3200, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lBrother DR-3200 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Brother DR-3200 - qui devraient nous aider dans les premières étapes lors de l'utilisation Brother DR-3200
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Brother DR-3200
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Brother DR-3200 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Brother DR-3200?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Brother DR-3200, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Brother DR-3200 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)