Manuel d’utilisation Packard Bell REFDOCS02420200

15 pages 1.11 mb
Télécharger

Aller à la page of 15

Summary
  • Packard Bell REFDOCS02420200 - page 1

    Packard Bell S tella (iXtreme) Disassembly Manual ...

  • Packard Bell REFDOCS02420200 - page 2

    1 Table of Contents Overview 2 Technician Notes 2 Disassembly Instructions 2 Reassembly Instru ctions 2 Required T ools 2 Hazardous Voltage 3 Avoid Electrostatic Discharge 3 Power Supply Unit 3 Removing the Rear Bezel 4 Removing the Left Side Cover 4 Removing the Right Side Cover 5 Removing the Front Bezel 5 Removing the Drive Bracket 6 Removing th ...

  • Packard Bell REFDOCS02420200 - page 3

    2 Overview This document contains st ep-by-step disa ssembly instructions for the Stella (iXtreme) chassi s. The instructions are illustrated where necessary with images of the pa rt that is being removed or disassembled. Furthermore , the screws that are re moved are shown next to the image of the parts themselves. Packard Bell reserves the right ...

  • Packard Bell REFDOCS02420200 - page 4

    3 Hazardous Voltage There is hazardous voltage present insi de the computer when it is conne cted to an AC supply, even when the computer’s power switch i s off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, contact an Authorized Service Provider for proper (un)i nstallation of optional hardwar e devices . Av ...

  • Packard Bell REFDOCS02420200 - page 5

    4 Removing the Rear Bezel To remove the rear bezel, do as follows: 1. Turn off the computer, the monitor and all peripheral device s. 2. Disconnect all power and d ata cables connected to the comp uter. 3. Face the back of the unit. 4. Locate a handhold under the chassi s. 5. Gently push the latch that fixes the rear bezel to the chassis and ca ref ...

  • Packard Bell REFDOCS02420200 - page 6

    5 Fig. 3: Removing the left side cover Removing the Right Side Cover To remove the right side cover, first remove the rear bezel (see section Removing the Rear Bezel ) and then perform the following st eps: 1. Remove the two screws that hold the right side cover. 2. Carefully slide the side cover two centim etre s towards the f ront of the chassi s ...

  • Packard Bell REFDOCS02420200 - page 7

    6 Removing the Drive Bracket To remove the drive bracket containing the DVD/CD-ROM drive and the floppy disk drive, first remove the rear bezel (see section Removing the Rear Bezel ), remove the left side cover (see section Removing the Left Side Cover ), re move the front bezel (see section Removing the Front Bezel ); then follow the step s below: ...

  • Packard Bell REFDOCS02420200 - page 8

    7 Fig. 7: Removing the drive bracket Removing the DVD/CD-ROM Drive To remove the DVD or CD-ROM drive, first remove the rear be zel (see section Removing the Rear Bezel ), remove the left side cover (see se ction Removing the Left Side Cover ), remove the right side cover (see section Removing the Right Side Cover ), remo ve the drive bracket (see s ...

  • Packard Bell REFDOCS02420200 - page 9

    8 Fig. 9: Removing the floppy disk driv e screws 3. If required, remove the screws on the right side as well. 4. Slide the floppy disk drive towards the front out of the bay. Removing the Hard Disk Drive To remove the hard disk drive, first remove the rear bezel (see section Removin g the Rear Bezel ) and remove the left side cover (see section Rem ...

  • Packard Bell REFDOCS02420200 - page 10

    9 3. Remove the screw on the side of the hard disk drive bra cket holding it to the drive bracket above (see Fig 6 in se ction Removing the Drive Bracket ). 4. Slide the hard disk drive bracke t backwards out of the chassis. Fig. 12: Removing the hard disk drive bracket 5. Remove the screws that hold the hard disk drive in the bracket and slide it ...

  • Packard Bell REFDOCS02420200 - page 11

    10 Fig. 14: Removing the front USB port screws Removing the Switch/LED Assembly To remove the switch/LED assembly an d the cable, first remove the rear bezel (see section Removing the Rear Bezel ) and remove the left side cover (see se ction Removing the Left Side Cover ), remove the front bezel (see section Rem oving the Front Bezel ); then follow ...

  • Packard Bell REFDOCS02420200 - page 12

    11 Fig. 16: Removing the CPU fan and heat sink 3. Lift the lever to unlock the CPU from its socket. Fig. 17: Removing the CPU 4. Take out the CPU. Be very careful not to remove any of the heat paste on the CP U surface! Removing the Pentium 4 CPU If the CPU installed is a Pentium IV, please perform this additional step: 1. Remove the CPU heat brack ...

  • Packard Bell REFDOCS02420200 - page 13

    12 Fig. 19: Removing the system fan 2. Take out the system fan by removing the screws, located on the b ack of the chassis, holding the syste m fan to the chassis. Fig. 20: Removing system fan screws Removing the Motherboard To remove the power supply unit, first remove the rear bezel (see section Removing the Rear Bezel ), remove the left side cov ...

  • Packard Bell REFDOCS02420200 - page 14

    13 instructions on how to remove this com ponent). 3. Remove the screws that hold the moth erboard in place and carefull y take out the motherboard from the chassis. Fig. 22: Removing the screws of the motherboard Removing the Power Supply To remove the power supply unit, first remove the rear bezel (see section Removing the Rear Bezel ) and remove ...

  • Packard Bell REFDOCS02420200 - page 15

    14 Notice The information in this guide is subject to change without notice. This guide contains information prote cted by copy right. No part of this guide may be photocopied or reproduced in any form or by any means witho ut prio r written consent from NEC Computers Internatio nal BV. NEC COMPUTERS INTERNATIONAL BV SHALL NOT BE LIABLE FOR TECHNIC ...

Fabricant Packard Bell Catégorie Personal Computer

Les documents que nous recevons du fabricant de l'appareilPackard Bell REFDOCS02420200 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Packard Bell
- manuels d’utilisations REFDOCS02420200
- fiches produit Packard Bell
- dépliants
- ou étiquettes-énergie Packard Bell REFDOCS02420200
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Packard Bell REFDOCS02420200.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Packard Bell REFDOCS02420200, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Packard Bell REFDOCS02420200. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Packard Bell REFDOCS02420200.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Packard Bell REFDOCS02420200, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Packard Bell REFDOCS02420200 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Packard Bell REFDOCS02420200.

Le manuel d’utilisation complet Packard Bell, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Packard Bell REFDOCS02420200 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Packard Bell REFDOCS02420200, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lPackard Bell REFDOCS02420200 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Packard Bell REFDOCS02420200 - qui devraient nous aider dans les premières étapes lors de l'utilisation Packard Bell REFDOCS02420200
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Packard Bell REFDOCS02420200
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Packard Bell REFDOCS02420200 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Packard Bell REFDOCS02420200?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Packard Bell REFDOCS02420200, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Packard Bell REFDOCS02420200 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)