English dropdown-ico

Manual Packard Bell REFDOCS02420200

15 pages 1.11 mb
Download

Go to site of 15

Summary
  • Packard Bell REFDOCS02420200 - page 1

    Packard Bell S tella (iXtreme) Disassembly Manual ...

  • Packard Bell REFDOCS02420200 - page 2

    1 Table of Contents Overview 2 Technician Notes 2 Disassembly Instructions 2 Reassembly Instru ctions 2 Required T ools 2 Hazardous Voltage 3 Avoid Electrostatic Discharge 3 Power Supply Unit 3 Removing the Rear Bezel 4 Removing the Left Side Cover 4 Removing the Right Side Cover 5 Removing the Front Bezel 5 Removing the Drive Bracket 6 Removing th ...

  • Packard Bell REFDOCS02420200 - page 3

    2 Overview This document contains st ep-by-step disa ssembly instructions for the Stella (iXtreme) chassi s. The instructions are illustrated where necessary with images of the pa rt that is being removed or disassembled. Furthermore , the screws that are re moved are shown next to the image of the parts themselves. Packard Bell reserves the right ...

  • Packard Bell REFDOCS02420200 - page 4

    3 Hazardous Voltage There is hazardous voltage present insi de the computer when it is conne cted to an AC supply, even when the computer’s power switch i s off. Exposure to hazardous voltage could cause personal injury. To avoid risk of injury, contact an Authorized Service Provider for proper (un)i nstallation of optional hardwar e devices . Av ...

  • Packard Bell REFDOCS02420200 - page 5

    4 Removing the Rear Bezel To remove the rear bezel, do as follows: 1. Turn off the computer, the monitor and all peripheral device s. 2. Disconnect all power and d ata cables connected to the comp uter. 3. Face the back of the unit. 4. Locate a handhold under the chassi s. 5. Gently push the latch that fixes the rear bezel to the chassis and ca ref ...

  • Packard Bell REFDOCS02420200 - page 6

    5 Fig. 3: Removing the left side cover Removing the Right Side Cover To remove the right side cover, first remove the rear bezel (see section Removing the Rear Bezel ) and then perform the following st eps: 1. Remove the two screws that hold the right side cover. 2. Carefully slide the side cover two centim etre s towards the f ront of the chassi s ...

  • Packard Bell REFDOCS02420200 - page 7

    6 Removing the Drive Bracket To remove the drive bracket containing the DVD/CD-ROM drive and the floppy disk drive, first remove the rear bezel (see section Removing the Rear Bezel ), remove the left side cover (see section Removing the Left Side Cover ), re move the front bezel (see section Removing the Front Bezel ); then follow the step s below: ...

  • Packard Bell REFDOCS02420200 - page 8

    7 Fig. 7: Removing the drive bracket Removing the DVD/CD-ROM Drive To remove the DVD or CD-ROM drive, first remove the rear be zel (see section Removing the Rear Bezel ), remove the left side cover (see se ction Removing the Left Side Cover ), remove the right side cover (see section Removing the Right Side Cover ), remo ve the drive bracket (see s ...

  • Packard Bell REFDOCS02420200 - page 9

    8 Fig. 9: Removing the floppy disk driv e screws 3. If required, remove the screws on the right side as well. 4. Slide the floppy disk drive towards the front out of the bay. Removing the Hard Disk Drive To remove the hard disk drive, first remove the rear bezel (see section Removin g the Rear Bezel ) and remove the left side cover (see section Rem ...

  • Packard Bell REFDOCS02420200 - page 10

    9 3. Remove the screw on the side of the hard disk drive bra cket holding it to the drive bracket above (see Fig 6 in se ction Removing the Drive Bracket ). 4. Slide the hard disk drive bracke t backwards out of the chassis. Fig. 12: Removing the hard disk drive bracket 5. Remove the screws that hold the hard disk drive in the bracket and slide it ...

  • Packard Bell REFDOCS02420200 - page 11

    10 Fig. 14: Removing the front USB port screws Removing the Switch/LED Assembly To remove the switch/LED assembly an d the cable, first remove the rear bezel (see section Removing the Rear Bezel ) and remove the left side cover (see se ction Removing the Left Side Cover ), remove the front bezel (see section Rem oving the Front Bezel ); then follow ...

  • Packard Bell REFDOCS02420200 - page 12

    11 Fig. 16: Removing the CPU fan and heat sink 3. Lift the lever to unlock the CPU from its socket. Fig. 17: Removing the CPU 4. Take out the CPU. Be very careful not to remove any of the heat paste on the CP U surface! Removing the Pentium 4 CPU If the CPU installed is a Pentium IV, please perform this additional step: 1. Remove the CPU heat brack ...

  • Packard Bell REFDOCS02420200 - page 13

    12 Fig. 19: Removing the system fan 2. Take out the system fan by removing the screws, located on the b ack of the chassis, holding the syste m fan to the chassis. Fig. 20: Removing system fan screws Removing the Motherboard To remove the power supply unit, first remove the rear bezel (see section Removing the Rear Bezel ), remove the left side cov ...

  • Packard Bell REFDOCS02420200 - page 14

    13 instructions on how to remove this com ponent). 3. Remove the screws that hold the moth erboard in place and carefull y take out the motherboard from the chassis. Fig. 22: Removing the screws of the motherboard Removing the Power Supply To remove the power supply unit, first remove the rear bezel (see section Removing the Rear Bezel ) and remove ...

  • Packard Bell REFDOCS02420200 - page 15

    14 Notice The information in this guide is subject to change without notice. This guide contains information prote cted by copy right. No part of this guide may be photocopied or reproduced in any form or by any means witho ut prio r written consent from NEC Computers Internatio nal BV. NEC COMPUTERS INTERNATIONAL BV SHALL NOT BE LIABLE FOR TECHNIC ...

Manufacturer Packard Bell Category Personal Computer

Documents that we receive from a manufacturer of a Packard Bell REFDOCS02420200 can be divided into several groups. They are, among others:
- Packard Bell technical drawings
- REFDOCS02420200 manuals
- Packard Bell product data sheets
- information booklets
- or energy labels Packard Bell REFDOCS02420200
All of them are important, but the most important information from the point of view of use of the device are in the user manual Packard Bell REFDOCS02420200.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Packard Bell REFDOCS02420200, service manual, brief instructions and user manuals Packard Bell REFDOCS02420200. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Packard Bell REFDOCS02420200.

Similar manuals

A complete manual for the device Packard Bell REFDOCS02420200, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Packard Bell REFDOCS02420200 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Packard Bell REFDOCS02420200.

A complete Packard Bell manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Packard Bell REFDOCS02420200 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Packard Bell REFDOCS02420200, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Packard Bell REFDOCS02420200, that we can find in the current document
3. Tips how to use the basic functions of the device Packard Bell REFDOCS02420200 - which should help us in our first steps of using Packard Bell REFDOCS02420200
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Packard Bell REFDOCS02420200
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Packard Bell REFDOCS02420200 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Packard Bell REFDOCS02420200?

Use the form below

If you did not solve your problem by using a manual Packard Bell REFDOCS02420200, ask a question using the form below. If a user had a similar problem with Packard Bell REFDOCS02420200 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)