Manuel d’utilisation EverFocus EHD350/H-3

13 pages Non applicable
Télécharger

Aller à la page of 13

Summary
  • EverFocus EHD350/H-3 - page 1

    EVERFOCUS 1/3” 560 TVL High Resolution Color Rugged Dome Camera Operation Instructions Model No. EHD350 Please read this manual first for correct installa tion and operation. This m a nual should be retained for future reference. The information in this m anual was curren t when published. The manufacturer reserves the righ t to revise and improv ...

  • EverFocus EHD350/H-3 - page 2

    1 the camera body . Use lens tissue or a cotton swab and ethanol to clea n the sensor and the camera lens. 7. Do not operate the camera beyond th e specified temperatur e, humidity or power sour ce ratings. Use the camera at temperatures with in –40 ℃ ~ 50 ℃ (-40F ~122F) and hum idity between 20%~ 80%. The input power source is 12VDC/24V AC. ...

  • EverFocus EHD350/H-3 - page 3

    2 z Desiccant Pack x 1 z Manual x 1 Optional Accessory z W all Mount Bracket (BA-EHD) SPECIF ICA TIO NS Pickup Device 1/3'' SONY Super HAD CCD Video Format NTSC or PAL Scanning System NTSC: 525 TV lines, 60 fields/sec PAL: 625 TV lines, 50 fields/sec Picture Elements 768 x 494(NTSC) ; 752 x 582(PAL) Horizontal Resolution 560TVL Sensitivit ...

  • EverFocus EHD350/H-3 - page 4

    3 24VAC: 20.5VA max. (heater ON ) 12VDC: 3.5W max. (heater OFF ) 12VDC: 11W max. (heater ON ) Dimensions 130mm(W) x 98.8mm(H) x 130mm ( D); 5.1"(W) x 3.9"(H) x 5.1"(D) Weight 1.7kg ; 3.7lbs Operating Temperature -40°C~50°C ; -40°F~122°F (20%~80% Humidity) Certifications FCC/CE DIMENSIONS INST ALLA TION 1. Loosen the 4 fix screws ...

  • EverFocus EHD350/H-3 - page 5

    4 2. Remove the camera. T o remove the camera, first unp lug the wire connection on the back of the camera. Then loosen the 2 locking screws on the camera ba se, push the camera base to the right (toward heater direction, as shown in Figure 3), remove the cam era from the mounting base. Reinstall the camera and the cable wh ile the base mounting is ...

  • EverFocus EHD350/H-3 - page 6

    5 Attach the base to the wall or ceiling , fix the base by the 4 setscrews attached in the accessory pack. The dome is weighted 1.7kg, please make sure if the mounting is strengthened enough to support it, if not, please reinfo rce the mounting according to the environm ent. Note : The diameter of the screw hole is ψ 4.7mm. Caution: T o prevent mo ...

  • EverFocus EHD350/H-3 - page 7

    6 4. Re-assemble Camera 1. When mounting COLOR RUGGED DOME CAMERA on the wall, please aim the “ Wa l l ” in line with the triangle “ S ” m arked on the lead frame. (Factory default) 2. When mounting COLOR RUGGED DOME CAMERA on the ceiling, please aim the “ Ceiling ” in line with the triangle “ S ” m arked on the lead frame. 6 Figure ...

  • EverFocus EHD350/H-3 - page 8

    7 5. W ire Connection Connect the power supply cable (AC 24V/DC12V), video output and alarm output to the proper connect ors shown as Figure 7. The V. Phase adjustment screw is located on the termination board. The vertical phase may require adjustment to synchronize the vertical phase of the camera with other cam era in the system wh en it is to b ...

  • EverFocus EHD350/H-3 - page 9

    8 6. V i ew Angle Adjustment The camera can be rotated 360 ° horizontally , 140 ° vertically and 60 ° 3’rd axis view angles (as shown in Figure 8). Adjust the proper camera view angle as needed. If a vari-focal lens is used , you may adjust the focus and zoom of the lens to bring the object in focus. Be sure to loosen the lo cking screws on th ...

  • EverFocus EHD350/H-3 - page 10

    9 DIP SWITCH FUNCTION LL (Line-Lock) OFF/ON To select the sync mode between Intern al Sync.(LL off) and Line-Lock (LL on). Set the line-lock off, the cam era will sync hronize to the internal tim e base. Set the line-lock ON, the camera’s vertical s ynchronization can be driven by the AC signal in the power lines. Note: Line-Lock sync mode operat ...

  • EverFocus EHD350/H-3 - page 11

    10 BLC (Back Light Compensation) ON/OFF When BLC is turned on, the AGC, ES a nd IRIS operating points are determined by averaging over the center area instead of entire field-of-view, so that a dimly-lit foreground object at center area can be clearly distinguished from brightly-lit backgrounds. BLC should not be used unless it is n eeded to compen ...

  • EverFocus EHD350/H-3 - page 12

    11 SIMPLE INSTRUCTIONS FOR THE DESICCANT P ACK Due to the camera lens blurred from the hum idity inside the camera. The desiccant pack absorbs the humidity; pleas e refer to the easy instruction as follows: 1. Adjust all settings first and pl ace the desiccant pack on the ho rizontal rod, then bend the horizontal rod and fix it. 2. Install the oute ...

  • EverFocus EHD350/H-3 - page 13

    12 EverFocus Electr onics Corp. Head Office: 12F , No.79 Sec. 1 Shin-T ai W u Road, Hsi-Chih, T aipei, T aiwan TEL: +886-2-26982334 F AX: +886-2-26982380 www .everfocus.com.tw USA L.A. Office: 1801 Highland A ve. Unit A Duarte, CA 91010, U.S.A. TEL: +1-626-844-8888 F AX: +1-626-844-8838 www .everfocus.com USA N.Y . Office: 415 Oser A venue Unit S H ...

Fabricant EverFocus Catégorie Security camera

Les documents que nous recevons du fabricant de l'appareilEverFocus EHD350/H-3 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques EverFocus
- manuels d’utilisations EHD350/H-3
- fiches produit EverFocus
- dépliants
- ou étiquettes-énergie EverFocus EHD350/H-3
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation EverFocus EHD350/H-3.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation EverFocus EHD350/H-3, manuels d’entretien, brefs manuels ou manuels de l’utilisateur EverFocus EHD350/H-3. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit EverFocus EHD350/H-3.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil EverFocus EHD350/H-3, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser EverFocus EHD350/H-3 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs EverFocus EHD350/H-3.

Le manuel d’utilisation complet EverFocus, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel EverFocus EHD350/H-3 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières EverFocus EHD350/H-3, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lEverFocus EHD350/H-3 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil EverFocus EHD350/H-3 - qui devraient nous aider dans les premières étapes lors de l'utilisation EverFocus EHD350/H-3
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de EverFocus EHD350/H-3
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service EverFocus EHD350/H-3 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de EverFocus EHD350/H-3?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec EverFocus EHD350/H-3, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec EverFocus EHD350/H-3 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)