Français dropdown-ico

Manuel d’utilisation Cisco Systems Cisco ONS 15454 SDH

34 pages 0.4 mb
Télécharger

Aller à la page of 34

Summary
  • Cisco Systems Cisco ONS 15454 SDH - page 1

    CHAPTER 4-1 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 4 Turn Up Node This chapter explains ho w to provision a single Cisco ONS 15454 SDH node and turn it up for service, including node name, date and time, timing references, network attrib utes such as IP address and default router , users and user security , and card protection group ...

  • Cisco Systems Cisco ONS 15454 SDH - page 2

    4-2 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D24 Verify Card Installation 8. NTP-D170 Create Protection Groups, page 4-26 —Complete this procedure, as needed, to set up 1:1, 1:N, 1+1, or Y -cable protection groups for ONS 15454 SDH electrical and optical cards. If you are turning up a D WDM or hybrid node, ...

  • Cisco Systems Cisco ONS 15454 SDH - page 3

    4-3 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D24 Verify Card Installation Step 6 V erify that electrical cards (E1-N-14, E1-42, E3-12, DS3I-N-12, or STM1E) are installed in the ONS 15454 SDH slots as designated by your installation plan. Step 7 If your site plan requires an Ethernet card, verify that the Eth ...

  • Cisco Systems Cisco ONS 15454 SDH - page 4

    4-4 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D30 Create Users and Assign Security NTP-D30 Create Users and Assign Security Step 1 Complete the “DLP-D60 Log into CTC” task on page 3-24 at the node where you want to create users. If you are already logged in, continue with Step 2. Note Y ou must log in as ...

  • Cisco Systems Cisco ONS 15454 SDH - page 5

    4-5 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D75 Create a New User—Multiple Nodes • Passw ord—T ype the user password. The password must be a minimum of six and a maximum of 20 alphanumeric (a-z, A-Z, 0-9) and special (+, #, %) characters, where at least two characters are nonalphabetic and at least on ...

  • Cisco Systems Cisco ONS 15454 SDH - page 6

    4-6 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D25 Set Up Name, Date, Time, and Contact Information • Security Lev el—Choose a security lev el for the user: RETRIEVE, MAINTEN ANCE, PR O VISIONING, or SUPER USER. Refer to the Cisco ONS 15454 SDH Reference Manual for information about the capabilities provid ...

  • Cisco Systems Cisco ONS 15454 SDH - page 7

    4-7 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D25 Set Up Name, Date, Time, and Contact Information Ti p Y ou can also position nodes manually on the network vie w map. Press Ctrl then drag and drop the node icon. T o create a logical network map for all ONS 15454 SDH users, complete the “NTP-D172 Create a L ...

  • Cisco Systems Cisco ONS 15454 SDH - page 8

    4-8 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D279 Set Power Monitor Thresholds Step 6 Revie w the node information. If you need to make corrections, repeat Steps 3 through 5 to enter the corrections. If the information is correct, continue with the “NTP-D279 Set Power Monitor Thresholds” procedure on pag ...

  • Cisco Systems Cisco ONS 15454 SDH - page 9

    4-9 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D169 Set Up CTC Network Access NTP-D169 Set Up CTC Network Access Step 1 Complete the “DLP-D60 Log into CTC” task on page 3-24 . If you are already logged in, continue with Step 2 . Step 2 Complete the “DLP-D249 Provision IP Settings” task on page 4-10 to ...

  • Cisco Systems Cisco ONS 15454 SDH - page 10

    4-10 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D249 Provision IP Settings DLP-D249 Provision IP Settings Caution All network changes should be approv ed by your network (or LAN) administrator . Step 1 If you are in network vie w , switch to node vie w by double-clicking the node you want to turn up on the net ...

  • Cisco Systems Cisco ONS 15454 SDH - page 11

    4-11 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D249 Provision IP Settings • MA C Address—( Display only . ) Displays the ONS 15454 SDH IEEE 802 MA C address. • Net/Subnet Mask Length—T ype the subnet mask length (decimal number representing the subnet mask length in bits) or click the arro ws to adjus ...

  • Cisco Systems Cisco ONS 15454 SDH - page 12

    4-12 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D249 Provision IP Settings Step 5 Click OK . The network vie w appears. The node icon appears in gray , during which time you cannot access the node. Step 6 Double-click the node icon when it becomes green. As necessary , complete the “DLP-D65 Create a Static R ...

  • Cisco Systems Cisco ONS 15454 SDH - page 13

    4-13 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D64 Set the IP Address, Default Router, and Network Mask Using the LCD Step 7 Return to your originating procedure (NTP). DLP-D64 Set the IP Address, Default Router, and Network Mask Using the LCD Note Y ou cannot perform this task if the LCD IP Display on the no ...

  • Cisco Systems Cisco ONS 15454 SDH - page 14

    4-14 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D64 Set the IP Address, Default Router, and Network Mask Using the LCD Figur e 4-2 Changing the IP A ddress Step 4 Push the Slot button to mo ve to the IP address or subnet mask digit you need to change. The selected digit f lashes. Ti p The Slot, Status, and Por ...

  • Cisco Systems Cisco ONS 15454 SDH - page 15

    4-15 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D65 Create a Static Route Step 10 Return to your originating procedure (NTP). DLP-D65 Create a Static Route Step 1 In node vie w , click the Provisioning > Network tabs. Step 2 Click the Static Routing tab . Click Create . Step 3 In the Create Static Route dia ...

  • Cisco Systems Cisco ONS 15454 SDH - page 16

    4-16 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D250 Set Up or Change Open Shortest Path First Protocol DLP-D250 Set Up or Change Open Shortest Path First Protocol Step 1 In node vie w , click the Provisioning > Network > OSPF tabs. Step 2 On the top left side of the OSPF pane, complete the following: ? ...

  • Cisco Systems Cisco ONS 15454 SDH - page 17

    4-17 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D250 Set Up or Change Open Shortest Path First Protocol Step 5 Provision the OSPF priority and interv al settings: The OSPF priority and interval def aults are ones most commonly used by OSPF routers. V erify that these defaults match the ones used by the OSPF ro ...

  • Cisco Systems Cisco ONS 15454 SDH - page 18

    4-18 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D251 Set Up or Change Routing Information Protocol • Retransmit Int (sec)—Sets the time that will elapse before a packet is resent. Fi ve seconds is the default. • Dead Int (sec)—Sets the number of seconds that will pass while an OSPF router’ s packets ...

  • Cisco Systems Cisco ONS 15454 SDH - page 19

    4-19 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D27 Set Up the ONS 15454 SDH for Firewall Access Step 6 If you want to complete an address summary , complete the follo wing steps. If not, continue with Step 7 . Complete the address summary only if the ONS 15454 SDH is a gate way NE with multiple external ONS 1 ...

  • Cisco Systems Cisco ONS 15454 SDH - page 20

    4-20 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D67 Provision the IIOP Listener Port on the ONS 15454 SDH Step 3 If the CTC computer resides behind a f irew all, complete the “DLP-D68 Provision the IIOP Listener Port on the CTC Computer” task on page 4-22 . Figure 4-6 shows a CTC computer and ONS 15454 SDH ...

  • Cisco Systems Cisco ONS 15454 SDH - page 21

    4-21 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D67 Provision the IIOP Listener Port on the ONS 15454 SDH Step 3 Click Apply . Step 4 When the Change Network Conf iguration message appears, click Y es . Both ONS 15454 SDH TCC2s reboot, one at a time. The reboot takes approximately 15 minutes. See T able 4-1 on ...

  • Cisco Systems Cisco ONS 15454 SDH - page 22

    4-22 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D68 Provision the IIOP Listener Port on the CTC Computer DLP-D68 Provision the IIOP Listener Port on the CTC Computer Step 1 In node vie w , from the Edit menu, choose Preferences . Step 2 In the Preferences dialog box, click the Firewall tab . Step 3 In the CTC ...

  • Cisco Systems Cisco ONS 15454 SDH - page 23

    4-23 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D69 Set Up External or Line Timing Step 1 Complete the “DLP-D60 Log into CTC” task on page 3-24 the ONS 15454 SDH node where you want to set up timing. If you are already logged in, continue with Step 2. Step 2 Complete the “DLP-D69 Set Up External or Line ...

  • Cisco Systems Cisco ONS 15454 SDH - page 24

    4-24 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D69 Set Up External or Line Timing • E1, 2.048 MHz, 64 KHz—Choose E1 , 2.048 MHz , or 64 KHz depending on the signal supported in your market. For e xample, 64 KHz is used in Japan. E1, 2.048 MHz, and 64 KHz are physical signal modes used to transmit the exte ...

  • Cisco Systems Cisco ONS 15454 SDH - page 25

    4-25 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D70 Set Up Internal Timing – T iming Mode set to Line—Y our options are the node’ s working OC-N cards (non-DWDM nodes), or OSC cards (D WDM nodes) and Internal Clock. Select the cards/ports that are directly or indirectly connected to the node wired to the ...

  • Cisco Systems Cisco ONS 15454 SDH - page 26

    4-26 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D170 Create Protection Groups • E1, 2.048 MHz, 64 KHz—Choose E1 , 2.048 MHz , or 64 KHz depending on the signal supported in your market. For e xample, 64 KHz is used in Japan. E1, 2.048 MHz, and 64 KHz are physical signal modes used to transmit the external ...

  • Cisco Systems Cisco ONS 15454 SDH - page 27

    4-27 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D170 Create Protection Groups T able 4-3 describes the protection types a vailable on the ONS 15454 SDH. Stop. Y ou ha ve completed this procedur e. T able 4-3 Card Pr otection T ypes T ype Cards Description and Installation Requirements 1:1 E1-N-14 DS3i-N-12 E3- ...

  • Cisco Systems Cisco ONS 15454 SDH - page 28

    4-28 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D71 Create a 1:1 Protection Group DLP-D71 Create a 1:1 Protection Group Step 1 V erify that the cards required for 1:1 protection are installed according to requirements specif ied in T able 4-3 . Step 2 In node vie w , click the Provisioning > Protection tabs ...

  • Cisco Systems Cisco ONS 15454 SDH - page 29

    4-29 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D72 Create a 1:N Protection Group DLP-D72 Create a 1:N Protection Group Step 1 V erify that the cards are installed according to 1:N requirements specif ied in T able 4-3 on page 4-27 . Step 2 Click the Pro visioning > Protection tabs. Step 3 In the Protection ...

  • Cisco Systems Cisco ONS 15454 SDH - page 30

    4-30 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D73 Create a 1+1 Protection Group DLP-D73 Create a 1+1 Protection Group Step 1 V erify that the cards are installed according to the 1+1 requirements specif ied in T able 4-3 on page 4-27 . Step 2 In node vie w , click the Provisioning > Protection tabs. Step ...

  • Cisco Systems Cisco ONS 15454 SDH - page 31

    4-31 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D252 Create a Y-Cable Protection Group DLP-D252 Create a Y-Cable Protection Group Step 1 V erify that the transponder or muxponder cards are installed according to the Y -cable requirements specif ied in T able 4-3 on page 4-27 . Step 2 In node vie w , click the ...

  • Cisco Systems Cisco ONS 15454 SDH - page 32

    4-32 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D34 Set Up SNMP Step 5 From the A v ailable Ports list, choose the port that will be protected by the port you selected in Protect Ports. Click the top arrow b utton to move each port to the W orking Ports list. Step 6 Complete the remaining f ields: • Rev erti ...

  • Cisco Systems Cisco ONS 15454 SDH - page 33

    4-33 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D34 Set Up SNMP Note The community name is a form of authentication and access control. The community name assigned to the ONS 15454 SDH is case-sensitiv e and must match the community name of the network management system (NMS). • UDP Port—The default User D ...

  • Cisco Systems Cisco ONS 15454 SDH - page 34

    4-34 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D34 Set Up SNMP ...

Fabricant Cisco Systems Catégorie Network Router

Les documents que nous recevons du fabricant de l'appareilCisco Systems Cisco ONS 15454 SDH peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Cisco Systems
- manuels d’utilisations Cisco ONS 15454 SDH
- fiches produit Cisco Systems
- dépliants
- ou étiquettes-énergie Cisco Systems Cisco ONS 15454 SDH
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Cisco Systems Cisco ONS 15454 SDH.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Cisco Systems Cisco ONS 15454 SDH, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Cisco Systems Cisco ONS 15454 SDH. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Cisco Systems Cisco ONS 15454 SDH.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Cisco Systems Cisco ONS 15454 SDH, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Cisco Systems Cisco ONS 15454 SDH par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Cisco Systems Cisco ONS 15454 SDH.

Le manuel d’utilisation complet Cisco Systems, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Cisco Systems Cisco ONS 15454 SDH - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Cisco Systems Cisco ONS 15454 SDH, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lCisco Systems Cisco ONS 15454 SDH qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Cisco Systems Cisco ONS 15454 SDH - qui devraient nous aider dans les premières étapes lors de l'utilisation Cisco Systems Cisco ONS 15454 SDH
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Cisco Systems Cisco ONS 15454 SDH
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Cisco Systems Cisco ONS 15454 SDH dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Cisco Systems Cisco ONS 15454 SDH?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Cisco Systems Cisco ONS 15454 SDH, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Cisco Systems Cisco ONS 15454 SDH il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)