Français dropdown-ico

Manuel d’utilisation Polycom 2300

39 pages 0.53 mb
Télécharger

Aller à la page of 39

Summary
  • Polycom 2300 - page 1

    January 2008 Edition 1725-36082-001 Version F VIEW Certified Configuration Guide Nortel WLAN Security Switch 2300 Series with AP-2330 ...

  • Polycom 2300 - page 2

    Configuration Guide PN: 1725-36082-001_F .doc 2 Trademark Information Polycom® and t he logo design s SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registe red trademarks of Polycom, Inc. in the Un ited States of Am erica and various c ountries. All ot her trademarks used herein are the propert y of their respective owners. Patent Inf ...

  • Polycom 2300 - page 3

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 3 Introduction Polycom’s Voice Interoperability for Enterprise Wireless (VIEW) Certification Program is designed to ensure interoperability and high performance between SpectraLink 8000 Wireless Telephones and wireless LAN (WLAN) infrastructure products. The products ...

  • Polycom 2300 - page 4

    Configuration Guide PN: 1725-36082-001_F .doc 4 Contacting Nortel Technical Support If you purchased a service contract for your Nortel product from a distributor or authorized reseller, contact the technical support staff for that distributor or reseller for assistance. Additional information about the No rtel Technical Solutions Centers is availa ...

  • Polycom 2300 - page 5

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 5 Network Topology The following topology was tested during VIEW Certification. It is important to note that these do not necessarily represent all “Certified” configurations. Both Layer-2 and Layer-3 roaming were tested. Layer-3 roaming of SpectraLink 8000 Wireless ...

  • Polycom 2300 - page 6

    Configuration Guide PN: 1725-36082-001_F .doc 6 Access Point Capacity and Positioning Each site is unique in its AP requirements. Therefore, please take the following points into account wh en determining how many APs are needed and where they should be placed in the facility: Handset range There must be WLAN coverage wherever the SpectraLink 8000 ...

  • Polycom 2300 - page 7

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 7 the available bandwidth per call for 1 Mb/s operation, approximately 10 % of the available bandwidth per call for 2 Mb/s operation, approximately 7 % of the available bandwidth per call for 5.5 Mb/s operation, and approximately 5 % of the available bandwidth per call ...

  • Polycom 2300 - page 8

    Configuration Guide PN: 1725-36082-001_F .doc 8 Configuring a New WLAN Security Switch Starting from Factory Defaults 1. Using the supplied DB-9 male to DB-9 female standard RS-232 cable, connect the WLAN Security Switch to the serial port of a terminal or PC. 2. Run a terminal emulation program (such as HyperTerminal) or use a VT-100 terminal with ...

  • Polycom 2300 - page 9

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 9 Connecting APs To configure the WLAN Security Sw itch (WSS) to support an AP, you must first determine how the AP will connect to the switch. There are two types of AP-to-WSS connection: direct and distributed. Directly connected APs In direct connection, an AP connec ...

  • Polycom 2300 - page 10

    Configuration Guide PN: 1725-36082-001_F .doc 10 Command, comment, and screen text key In the sections below you will find commands, comments and system responses or other screen-displayed information involved in the configuration process. This key expl ains the text styles an d symbols used to denote them. Text Style Denotes: xxxxxxxx Typed comman ...

  • Polycom 2300 - page 11

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 11 Configuration Example – CLI AP configuration To add a directly connected AP-2330 attached to port 1 on a WSS using CLI: set port ty pe ap 1 mo del 2330 poe enable # Defines t he port nu mber on the switch that the AP is connecte d to, the model number of the AP a n ...

  • Polycom 2300 - page 12

    Configuration Guide PN: 1725-36082-001_F .doc 12 Service profile / SSID configuration To create a SSID named Voice using WPA-PSK that will be advertised on 802.11a/b/g radios using CLI: set service -profile V oice ssid-na me Voice # Creates a new servi ce profile a nd SSID name d Voice. Note it’s a best prac tice recomme ndation to u se the same ...

  • Polycom 2300 - page 13

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 13 set service -profile V oice auth-do t1x disable # Disables 802. 1x authentica tion. set service -profile V oice attr vl an-name Voic e # Specifies the VLAN name to map the voice ha ndsets traffic to. Radio Profile configuration The default Radio Profile needs to be m ...

  • Polycom 2300 - page 14

    Configuration Guide PN: 1725-36082-001_F .doc 14 # Applies t he ACL to the Voice VL AN for ingre ss and egress traf fic. To create an ACL that allows and prioritizes IP protocol 119 (SVP) with a Class of Service (CoS) 7 and denies all other IP traffic on the Voice VLAN using CLI: set securit y acl ip S pectraLink p ermit cos 7 119 0.0.0. 0 255.255. ...

  • Polycom 2300 - page 15

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 15 Configuration Example – WLAN Management Software Adding a WLAN Security Switch to the Network Plan Before WLAN Management Software can be used to configure a WLAN Security Switch, the WSS must be added to the WMS server. To add a WLAN Security Switch to WLAN Manage ...

  • Polycom 2300 - page 16

    Configuration Guide PN: 1725-36082-001_F .doc 16 5. In the Enable Password field, type the enable password for the WLAN Security Switch. The enable password must match the enable password that was defined in the Quick Start Wizard. For more information, see the Nortel WLAN Security Switch 2300 Series Configuration Guide . 6. Click the Next button. ...

  • Polycom 2300 - page 17

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 1 7 5. For directly connected APs, select an available port on the switch from the Available Ports drop-down list. Click the Ne xt button. 6. For distributed APs, enter the Name and Serial Number of the AP. Click the Next button. ...

  • Polycom 2300 - page 18

    Configuration Guide PN: 1725-36082-001_F .doc 18 7. Specify the model of the Nortel AP you are configuring. Valid models include 2330, 2330A and 2330B . Click the Next button. 8. To configure the 802.11g Radio : a. Select default for the Radio Profile . b. Specify the Channel Number and Transmit Power the radio should use, as determined by the site ...

  • Polycom 2300 - page 19

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 19 9. To configure the 802.11a Radio , a. Select default for the Radio Profile . b. Specify the Channel Number and Transmit Power the radio should use, as determined by the site survey performed on the facility. 10. Click the Finish button. 11. The AP has now been added ...

  • Polycom 2300 - page 20

    Configuration Guide PN: 1725-36082-001_F .doc 20 VLAN configuration For security and flexibility it is recommended that voice and data be on separate VLANs. For this example, a new VLAN named Voice with a VLAN ID 2 will be created and tagged to the uplink port 8 . 1. In WMS click Configuration on the tool bar. 2. In the Organizer panel, ex pand the ...

  • Polycom 2300 - page 21

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 21 4. For VLAN Name enter Voice . 5. For VLAN ID specify 2 . Click the Next button. 6. In the Port/Port Group list, select the 802.1Q tagged uplink port (P08) and click the Add button. 7. Click the Tag check box and specify the 802.1Q t ag value 2 . 8. Click the Finish ...

  • Polycom 2300 - page 22

    Configuration Guide PN: 1725-36082-001_F .doc 22 9. The Voice VLAN 2 is now 802.1Q tagged to the uplink port P08. a. Highlight the Voice VLAN. b. In the Network Plan Tasks panel, select IGMP. 10. In the VLAN Properties window, disab le IGMP by clearing the Enabled check box. Click the OK button. ...

  • Polycom 2300 - page 23

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 23 Service Profile / SSID configuration To create a SSID named Voice using WPA-PSK or WPA2-PSK that will be advertised on 802.11a/b/g radios using WMS: 1. In WMS click Configuration on the tool bar. 2. In the Organizer panel expand the WSS and select Wireless Services . ...

  • Polycom 2300 - page 24

    Configuration Guide PN: 1725-36082-001_F .doc 24 6. Set the SSID Type to Encrypted and use the default Vend or type SpectraLink . Click the Next button. Selecting the vendor SpectraLink tells WMS what ACLs to create to prioritize the voice traffic later in the wizard. 7. Select the Open Access check box. Click the Next b utton. MAC authentication m ...

  • Polycom 2300 - page 25

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 25 8. Settings for Wireless Security : a. To support handsets using WPA-PSK security, select the WPA check box. b. To support handsets using WPA2-PSK, select the RSN (WPA2) check box. ...

  • Polycom 2300 - page 26

    Configuration Guide PN: 1725-36082-001_F .doc 26 9. Click the Next button. 10. Settings for Wireless Encryption Cipher Suite : a. To support handsets using WPA-PSK with TKIP, select the TKIP check box. ...

  • Polycom 2300 - page 27

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 2 7 b. To support handsets using WPA2-PSK with AES/CCMP, select the AES (CCMP) check box. 11. Click the Next button. ...

  • Polycom 2300 - page 28

    Configuration Guide PN: 1725-36082-001_F .doc 28 12. Enter a hexadecimal pre-shared key or passphrase. a. If a passphrase is entered, click the Generate button to generate the hexadecimal pre-shared key. 13. Click the Next button. The pre-shared key must match on both the WSS and handsets or the handsets will not be able to associate with the Voice ...

  • Polycom 2300 - page 29

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 29 15. A default ACL will be generated which will allow and prioritize IP protocol 119 ( SVP ) traffic with the Class of Service level 7 and pass all other IP traffic on the Voice VLAN. a. (Optional) Modify the default ACL by removing the last statement, which will allo ...

  • Polycom 2300 - page 30

    Configuration Guide PN: 1725-36082-001_F .doc 30 16. Assign the Voice Service Profile to the default Radio Profile. This will determine which 802.1 1a and 802.11g radios will advertise the Voice SSID. For this example the default Radio Profile will be used which is assigned to all 802. 11a/g radios. This will provide support for handsets operating ...

  • Polycom 2300 - page 31

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 31 Radio Profile configuration The default Radio Profile needs to be modified to disable certain features to support the handsets. To modify the default Radio Profile using WMS: 1. In WMS click Configuration on the tool bar. 2. In the Organizer panel expand the WSS and ...

  • Polycom 2300 - page 32

    Configuration Guide PN: 1725-36082-001_F .doc 32 4. In the Radio Profile Properties window, click the Radio Profile tab. 5. Clear the Enable Active Scan check box. This disables active scanning, which prevents the ra dios from going off-channel and disrupting voice services. ...

  • Polycom 2300 - page 33

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 33 6. Click the Auto Tune tab. 7. Clear the Tune Channel and Tune Transmit Power check boxes. This disables automatic channel assignme nt for radios assigned to the radio profile. A static channel configuration is recommended to provide a stable and optimum RF environme ...

  • Polycom 2300 - page 34

    Configuration Guide PN: 1725-36082-001_F .doc 34 8. Click the Voice Configuration tab. Verify that the QoS Mode is set to SVP . WMM support is not currently available on the SpectraLink 8000 Wireless Telephones. 9. Click the OK button. ...

  • Polycom 2300 - page 35

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 35 Deploying changes Deploying the changes in WMS will upload and save the configuration to the WSS. To deploy the changes in WMS: 1. In WMS click Devices on the tool bar. 2. In the Local Changes Task List panel, select Deploy to upload and save the configuration change ...

  • Polycom 2300 - page 36

    Configuration Guide PN: 1725-36082-001_F .doc 36 3. When the Deploy option is selected, WMS will send, apply and save the configuration changes to the WSS. ...

  • Polycom 2300 - page 37

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 3 7 Example Configuration Files (For Reference Only) The following configuration file provides an example configuration to support SpectraLink 8000 Wireless Telephones using WPA-PSK: # Configura tion nvgen 'd at 2007-7 -26 22:51:55 # Image 5.0 .11.4.0 # Model 2360 ...

  • Polycom 2300 - page 38

    Configuration Guide PN: 1725-36082-001_F .doc 38 set vlan 2 port 8 tag 2 set igmp di sable vlan Voice set interfa ce 1 ip 19 2.168.1.50 2 55.255.255.0 set securit y acl ip S pectraLink p ermit cos 7 119 0.0.0. 0 255.255.255 .255 0.0.0 .0 255.255.2 55.255 set securit y acl ip S pectraLink p ermit 0.0.0. 0 255.255.255 .255 commit secu rity acl S pect ...

  • Polycom 2300 - page 39

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 39 set ap 1 na me WAP-233 0-1 set ap 1 ra dio 1 tx-p ower 10 mode enable set ap 1 ra dio 2 chan nel 44 tx-po wer 10 mode enable set ip https server en able set port po e 1 enable set vlan 1 name Data set vlan 1 port 8 tag 1 set vlan 2 name Voice set vlan 2 port 8 tag 2 ...

Fabricant Polycom Catégorie Switch

Les documents que nous recevons du fabricant de l'appareilPolycom 2300 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Polycom
- manuels d’utilisations 2300
- fiches produit Polycom
- dépliants
- ou étiquettes-énergie Polycom 2300
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Polycom 2300.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Polycom 2300, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Polycom 2300. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Polycom 2300.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Polycom 2300, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Polycom 2300 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Polycom 2300.

Le manuel d’utilisation complet Polycom, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Polycom 2300 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Polycom 2300, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lPolycom 2300 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Polycom 2300 - qui devraient nous aider dans les premières étapes lors de l'utilisation Polycom 2300
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Polycom 2300
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Polycom 2300 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Polycom 2300?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Polycom 2300, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Polycom 2300 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)