Polycom 2300の取扱説明書

39ページ 0.53 mb
ダウンロード

ページに移動 of 39

Summary
  • Polycom 2300 - page 1

    January 2008 Edition 1725-36082-001 Version F VIEW Certified Configuration Guide Nortel WLAN Security Switch 2300 Series with AP-2330 ...

  • Polycom 2300 - page 2

    Configuration Guide PN: 1725-36082-001_F .doc 2 Trademark Information Polycom® and t he logo design s SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registe red trademarks of Polycom, Inc. in the Un ited States of Am erica and various c ountries. All ot her trademarks used herein are the propert y of their respective owners. Patent Inf ...

  • Polycom 2300 - page 3

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 3 Introduction Polycom’s Voice Interoperability for Enterprise Wireless (VIEW) Certification Program is designed to ensure interoperability and high performance between SpectraLink 8000 Wireless Telephones and wireless LAN (WLAN) infrastructure products. The products ...

  • Polycom 2300 - page 4

    Configuration Guide PN: 1725-36082-001_F .doc 4 Contacting Nortel Technical Support If you purchased a service contract for your Nortel product from a distributor or authorized reseller, contact the technical support staff for that distributor or reseller for assistance. Additional information about the No rtel Technical Solutions Centers is availa ...

  • Polycom 2300 - page 5

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 5 Network Topology The following topology was tested during VIEW Certification. It is important to note that these do not necessarily represent all “Certified” configurations. Both Layer-2 and Layer-3 roaming were tested. Layer-3 roaming of SpectraLink 8000 Wireless ...

  • Polycom 2300 - page 6

    Configuration Guide PN: 1725-36082-001_F .doc 6 Access Point Capacity and Positioning Each site is unique in its AP requirements. Therefore, please take the following points into account wh en determining how many APs are needed and where they should be placed in the facility: Handset range There must be WLAN coverage wherever the SpectraLink 8000 ...

  • Polycom 2300 - page 7

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 7 the available bandwidth per call for 1 Mb/s operation, approximately 10 % of the available bandwidth per call for 2 Mb/s operation, approximately 7 % of the available bandwidth per call for 5.5 Mb/s operation, and approximately 5 % of the available bandwidth per call ...

  • Polycom 2300 - page 8

    Configuration Guide PN: 1725-36082-001_F .doc 8 Configuring a New WLAN Security Switch Starting from Factory Defaults 1. Using the supplied DB-9 male to DB-9 female standard RS-232 cable, connect the WLAN Security Switch to the serial port of a terminal or PC. 2. Run a terminal emulation program (such as HyperTerminal) or use a VT-100 terminal with ...

  • Polycom 2300 - page 9

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 9 Connecting APs To configure the WLAN Security Sw itch (WSS) to support an AP, you must first determine how the AP will connect to the switch. There are two types of AP-to-WSS connection: direct and distributed. Directly connected APs In direct connection, an AP connec ...

  • Polycom 2300 - page 10

    Configuration Guide PN: 1725-36082-001_F .doc 10 Command, comment, and screen text key In the sections below you will find commands, comments and system responses or other screen-displayed information involved in the configuration process. This key expl ains the text styles an d symbols used to denote them. Text Style Denotes: xxxxxxxx Typed comman ...

  • Polycom 2300 - page 11

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 11 Configuration Example – CLI AP configuration To add a directly connected AP-2330 attached to port 1 on a WSS using CLI: set port ty pe ap 1 mo del 2330 poe enable # Defines t he port nu mber on the switch that the AP is connecte d to, the model number of the AP a n ...

  • Polycom 2300 - page 12

    Configuration Guide PN: 1725-36082-001_F .doc 12 Service profile / SSID configuration To create a SSID named Voice using WPA-PSK that will be advertised on 802.11a/b/g radios using CLI: set service -profile V oice ssid-na me Voice # Creates a new servi ce profile a nd SSID name d Voice. Note it’s a best prac tice recomme ndation to u se the same ...

  • Polycom 2300 - page 13

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 13 set service -profile V oice auth-do t1x disable # Disables 802. 1x authentica tion. set service -profile V oice attr vl an-name Voic e # Specifies the VLAN name to map the voice ha ndsets traffic to. Radio Profile configuration The default Radio Profile needs to be m ...

  • Polycom 2300 - page 14

    Configuration Guide PN: 1725-36082-001_F .doc 14 # Applies t he ACL to the Voice VL AN for ingre ss and egress traf fic. To create an ACL that allows and prioritizes IP protocol 119 (SVP) with a Class of Service (CoS) 7 and denies all other IP traffic on the Voice VLAN using CLI: set securit y acl ip S pectraLink p ermit cos 7 119 0.0.0. 0 255.255. ...

  • Polycom 2300 - page 15

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 15 Configuration Example – WLAN Management Software Adding a WLAN Security Switch to the Network Plan Before WLAN Management Software can be used to configure a WLAN Security Switch, the WSS must be added to the WMS server. To add a WLAN Security Switch to WLAN Manage ...

  • Polycom 2300 - page 16

    Configuration Guide PN: 1725-36082-001_F .doc 16 5. In the Enable Password field, type the enable password for the WLAN Security Switch. The enable password must match the enable password that was defined in the Quick Start Wizard. For more information, see the Nortel WLAN Security Switch 2300 Series Configuration Guide . 6. Click the Next button. ...

  • Polycom 2300 - page 17

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 1 7 5. For directly connected APs, select an available port on the switch from the Available Ports drop-down list. Click the Ne xt button. 6. For distributed APs, enter the Name and Serial Number of the AP. Click the Next button. ...

  • Polycom 2300 - page 18

    Configuration Guide PN: 1725-36082-001_F .doc 18 7. Specify the model of the Nortel AP you are configuring. Valid models include 2330, 2330A and 2330B . Click the Next button. 8. To configure the 802.11g Radio : a. Select default for the Radio Profile . b. Specify the Channel Number and Transmit Power the radio should use, as determined by the site ...

  • Polycom 2300 - page 19

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 19 9. To configure the 802.11a Radio , a. Select default for the Radio Profile . b. Specify the Channel Number and Transmit Power the radio should use, as determined by the site survey performed on the facility. 10. Click the Finish button. 11. The AP has now been added ...

  • Polycom 2300 - page 20

    Configuration Guide PN: 1725-36082-001_F .doc 20 VLAN configuration For security and flexibility it is recommended that voice and data be on separate VLANs. For this example, a new VLAN named Voice with a VLAN ID 2 will be created and tagged to the uplink port 8 . 1. In WMS click Configuration on the tool bar. 2. In the Organizer panel, ex pand the ...

  • Polycom 2300 - page 21

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 21 4. For VLAN Name enter Voice . 5. For VLAN ID specify 2 . Click the Next button. 6. In the Port/Port Group list, select the 802.1Q tagged uplink port (P08) and click the Add button. 7. Click the Tag check box and specify the 802.1Q t ag value 2 . 8. Click the Finish ...

  • Polycom 2300 - page 22

    Configuration Guide PN: 1725-36082-001_F .doc 22 9. The Voice VLAN 2 is now 802.1Q tagged to the uplink port P08. a. Highlight the Voice VLAN. b. In the Network Plan Tasks panel, select IGMP. 10. In the VLAN Properties window, disab le IGMP by clearing the Enabled check box. Click the OK button. ...

  • Polycom 2300 - page 23

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 23 Service Profile / SSID configuration To create a SSID named Voice using WPA-PSK or WPA2-PSK that will be advertised on 802.11a/b/g radios using WMS: 1. In WMS click Configuration on the tool bar. 2. In the Organizer panel expand the WSS and select Wireless Services . ...

  • Polycom 2300 - page 24

    Configuration Guide PN: 1725-36082-001_F .doc 24 6. Set the SSID Type to Encrypted and use the default Vend or type SpectraLink . Click the Next button. Selecting the vendor SpectraLink tells WMS what ACLs to create to prioritize the voice traffic later in the wizard. 7. Select the Open Access check box. Click the Next b utton. MAC authentication m ...

  • Polycom 2300 - page 25

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 25 8. Settings for Wireless Security : a. To support handsets using WPA-PSK security, select the WPA check box. b. To support handsets using WPA2-PSK, select the RSN (WPA2) check box. ...

  • Polycom 2300 - page 26

    Configuration Guide PN: 1725-36082-001_F .doc 26 9. Click the Next button. 10. Settings for Wireless Encryption Cipher Suite : a. To support handsets using WPA-PSK with TKIP, select the TKIP check box. ...

  • Polycom 2300 - page 27

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 2 7 b. To support handsets using WPA2-PSK with AES/CCMP, select the AES (CCMP) check box. 11. Click the Next button. ...

  • Polycom 2300 - page 28

    Configuration Guide PN: 1725-36082-001_F .doc 28 12. Enter a hexadecimal pre-shared key or passphrase. a. If a passphrase is entered, click the Generate button to generate the hexadecimal pre-shared key. 13. Click the Next button. The pre-shared key must match on both the WSS and handsets or the handsets will not be able to associate with the Voice ...

  • Polycom 2300 - page 29

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 29 15. A default ACL will be generated which will allow and prioritize IP protocol 119 ( SVP ) traffic with the Class of Service level 7 and pass all other IP traffic on the Voice VLAN. a. (Optional) Modify the default ACL by removing the last statement, which will allo ...

  • Polycom 2300 - page 30

    Configuration Guide PN: 1725-36082-001_F .doc 30 16. Assign the Voice Service Profile to the default Radio Profile. This will determine which 802.1 1a and 802.11g radios will advertise the Voice SSID. For this example the default Radio Profile will be used which is assigned to all 802. 11a/g radios. This will provide support for handsets operating ...

  • Polycom 2300 - page 31

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 31 Radio Profile configuration The default Radio Profile needs to be modified to disable certain features to support the handsets. To modify the default Radio Profile using WMS: 1. In WMS click Configuration on the tool bar. 2. In the Organizer panel expand the WSS and ...

  • Polycom 2300 - page 32

    Configuration Guide PN: 1725-36082-001_F .doc 32 4. In the Radio Profile Properties window, click the Radio Profile tab. 5. Clear the Enable Active Scan check box. This disables active scanning, which prevents the ra dios from going off-channel and disrupting voice services. ...

  • Polycom 2300 - page 33

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 33 6. Click the Auto Tune tab. 7. Clear the Tune Channel and Tune Transmit Power check boxes. This disables automatic channel assignme nt for radios assigned to the radio profile. A static channel configuration is recommended to provide a stable and optimum RF environme ...

  • Polycom 2300 - page 34

    Configuration Guide PN: 1725-36082-001_F .doc 34 8. Click the Voice Configuration tab. Verify that the QoS Mode is set to SVP . WMM support is not currently available on the SpectraLink 8000 Wireless Telephones. 9. Click the OK button. ...

  • Polycom 2300 - page 35

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 35 Deploying changes Deploying the changes in WMS will upload and save the configuration to the WSS. To deploy the changes in WMS: 1. In WMS click Devices on the tool bar. 2. In the Local Changes Task List panel, select Deploy to upload and save the configuration change ...

  • Polycom 2300 - page 36

    Configuration Guide PN: 1725-36082-001_F .doc 36 3. When the Deploy option is selected, WMS will send, apply and save the configuration changes to the WSS. ...

  • Polycom 2300 - page 37

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 3 7 Example Configuration Files (For Reference Only) The following configuration file provides an example configuration to support SpectraLink 8000 Wireless Telephones using WPA-PSK: # Configura tion nvgen 'd at 2007-7 -26 22:51:55 # Image 5.0 .11.4.0 # Model 2360 ...

  • Polycom 2300 - page 38

    Configuration Guide PN: 1725-36082-001_F .doc 38 set vlan 2 port 8 tag 2 set igmp di sable vlan Voice set interfa ce 1 ip 19 2.168.1.50 2 55.255.255.0 set securit y acl ip S pectraLink p ermit cos 7 119 0.0.0. 0 255.255.255 .255 0.0.0 .0 255.255.2 55.255 set securit y acl ip S pectraLink p ermit 0.0.0. 0 255.255.255 .255 commit secu rity acl S pect ...

  • Polycom 2300 - page 39

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_F .doc 39 set ap 1 na me WAP-233 0-1 set ap 1 ra dio 1 tx-p ower 10 mode enable set ap 1 ra dio 2 chan nel 44 tx-po wer 10 mode enable set ip https server en able set port po e 1 enable set vlan 1 name Data set vlan 1 port 8 tag 1 set vlan 2 name Voice set vlan 2 port 8 tag 2 ...

メーカー Polycom カテゴリー Switch

Polycom 2300のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 2300の取扱説明書
- Polycomの製品カード
- パンフレット
- またはPolycom 2300の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Polycom 2300の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Polycom 2300の取り付け説明書、サービスマニュアル、簡易説明書、またはPolycom 2300のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Polycom 2300の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Polycom 2300デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがPolycom 2300を使用するのを助ける技術的文書のことです。説明書は通常、全てのPolycom 2300ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Polycomの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Polycom 2300の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははPolycom 2300の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Polycom 2300に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Polycom 2300デバイスの基本機能を使うにあたってのヒント。 Polycom 2300のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Polycom 2300に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるPolycom 2300のメーカー/サービスへの連絡先に関する情報。

Polycom 2300についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもPolycom 2300の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPolycom 2300で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)